Search NASA⌕ Search

Engineering topics

Nurmi, James

Publications and source records attributed to Nurmi, James.

Reactivity of Zerovalent Metals in Aquatic Media: Effects of Organic Surface Coatings

Granular, reactive zerovalent metals (ZVMs)—especially iron (ZVI)—form the basis for model systems that have been used in fundamental and applied studies of a wide variety of environmental processes. This has resulted in notable advances in many areas, including the kinetics and mechanisms of contaminant reduction reactions, theory of filtration and transport of colloids in porous media, and modeling of complex reactive-transport scenarios. Recent emphasis on nano-sized ZVI has created a new opportunity: to advance the understanding of how coatings of organic polyelectrolytes—like natural organic matter (NOM)—influence the reactivity of environmental surfaces. Depending on many factors, organic coatings can be activating or passivating with respect to redox reactions at particle-solution interfaces. In this study, we show the effects of organic coatings on nZVI vary with a number of factors including: (i) time (i.e., “aging” is evident not only in the structure and composition of the nZVI but also in the interactions between nZVI and NOM) and (ii) the type of organic matter (i.e., suspensions of nZVI are stabilized by NOM and the model polyelectrolyte carboxymethylcellulose (CMC), but NOM stimulates redox reactions involving nZVI while CMC inhibits them).

Environmental Molecular Sciences Laboratory↗

Recovery of Iron/Iron Oxide Nanoparticles from Solution: Comparison of Methods and their Effects

Most methods currently being used to recover Fe0-core/oxide-shell nanoparticles from solutions (including the solvents they are synthesized or stored in) are potentially problematic because they may alter the particle composition (e.g., depositing salts formed from solutes) or leave the particles prone to transformations during subsequent storage and handling (e.g., due to residual moisture). In this study, several methods for recovery of nanoparticles from aqueous solution were studied to determine how they affect the structure and reactivity of the recovered materials. Simple washing of the nanoparticles during vacuum filtration (i.e., “flash drying”) can leave up to ~17 weight percent residual moisture. Modeling calculations suggest this moisture is mostly capillary or matric water held between particles and particle aggregates, which can be removed by drying for short periods at relative vapor pressures below 0.9. Flash drying followed by vacuum drying, all under N2, leaves no detectable residue from precipitation of solutes (detectable by X-ray photoelectron spectroscopy, XPS), no significant changes in overall particle composition or structure (determined by transmission electron microscopy, TEM), and negligible residual moisture (by thermogravimetric analysis, TGA). While this improved flash-drying protocol may be the preferred method for recovering nanoparticles for many purposes, we found that Fe0-core/oxide-shell nanoparticles still exhibit gradual aging during storage when characterized electrochemically with voltammetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Properties of Iron Nanoparticles: Doping Effects on Reactivity and Aging

Predicting and controlling the behaviors nanoparticles in the environment must include understanding the impact of trace elements and impurities (including dopants) on their properties including reactivity and lifetime. The significant impact of many trace elements on the redox activity of iron metal and iron oxide nanoparticles in natural and engineering systems is well established. However, the fundamental mechanisms responsible for specific behaviors and the relationship of the mechanisms to the structural characteristics of the particles and dopants are not as well understood. In addition, the role of trace elements on particle aging and the overall reaction lifetime has not yet received much attention. Here we report the impact of three different processes on the reactivity of iron metal-core oxide-shell nanoparticles with carbon tetrachloride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aging of Iron Nanoparticles in Water: Effects on Structure and Reactivity

We studied the aging of Fe0-core/oxide-shell nanoparticles in water with a focus on changes in (i) the composition and structure of the particles (by XRD, TEM, XPS, and bulk Fe0 content), and (ii) the reactivity of the particles (by carbon tetrachloride reaction kinetics, electrochemical corrosion potentials, and H2 production rates). The results show that nano-Fe0 become more reactive between 0 and ~2 days exposure to water, and then gradually it loses reactivity over the next few hundred days. The behavior of unaged nano-Fe0 in our laboratory experiments may be similar to that in field-scale applications for source-zone treatment due to the short reaction times involved. However, nano-Fe0 that has been aged in water for >3 days acquires properties that are relatively stable over weeks or even months.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization Challenges for Nanomaterials

Nanostructured materials are increasingly subject to nearly every type of chemical and physical analysis possible. Because of their small feature size there is a significant focus on tools with high spatial resolution. Because of their high surface area, it is also natural to characterize nanomaterials using tools designed to analyze surfaces. Regardless of the approach, nanostructured materials present a variety of obstacles to adequate, useful and needed analysis. This paper provides short overviews to some of the issues and complications including: particle stability, environmental effects, specimen handling, surface coating, contamination and time. Some specific examples are provided from a our work focused on ceria nanoparticles and iron metal-core/oxide-shell nanoparticles in which we use a combination of tools for routine analysis including XPS, TEM, and XRD and apply other methods as needed to obtain essential information.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aging of Iron Nanoparticles in Aqueous Solution: Effects on Structure and Reactivity

Aging (or longevity) is one of the most important and potentially limiting factors in the use of nano-Fe0 to reduce groundwater contaminants. We investigated the aging of FeH2 (Toda RNIP-10DS) in water with a focus on changes in (i) the composition and structure of the particles (by XPS, XRD, TEM, and bulk Fe0 content), and (ii) the reactivity of the particles (by carbon tetrachloride reaction kinetics and electrochemical corrosion potentials). Our results show that the FeH2 becomes more reactive between 0 and ~2 days aging, and then gradually loses reactivity over the next few hundred days. These changes in reactivity correlate with evidence for rapid destruction of the original Fe(III) oxide film on FeH2 during immersion and the subsequent formation of a new passivating mixed-valence Fe(II)-Fe(III) oxide shell. The behavior of “unaged” nano-Fe0 in the laboratory may be similar to that in field-scale applications for source-zone treatment due to the short reaction times involved. Long-term aged FeH2 acquires properties that are relatively stable over weeks or even months.

Environmental Molecular Sciences Laboratory↗