Search NASA⌕ Search

Engineering topics

Nyberg, Eric A

Publications and source records attributed to Nyberg, Eric A.

The TMS Magnesium Committee: Committed to the Advancement of Global Magnesium Technology

The TMS Magnesium Committee was established in the year 2000 as a spin-off of the Reactive Metals Committee, triggered by the strong global growth of magnesium being used in a variety of structural lightweight applications since the mid-1990’s. Since then the committee has seen a distinct development in terms of size, participation and focus. The article at hand outlines this development by recapitulating the output of its two main activities: the annual Magnesium Technology Symposia and the JOM Special Issues dedicated to magnesium research and development. Further records on the Magnesium Committee are available from the committee homepage (accessible through http://members.tms.org).

36 MATERIALS SCIENCE↗

MAGNESIUM ALLOYS IN US MILITARY APPLICATIONS: PAST, CURRENT AND FUTURE SOLUTIONS

Since the 1940’s Mg-alloys have been used for military applications, from aircraft components to ground vehicles. The drive for usage was primarily availability and lightweighting of military systems. But the promise of widespread military usage was not met largely based on corrosion and flammability concerns, poor mechanical behavior and inferior ballistic response. This review paper will cover historical, current and potential future applications with a focus on scientific, engineering and social barriers relevant to integration of Mg-alloy. It will also present mechanical and physical property improvements solutions which are currently being developed to address these issues.

36 MATERIALS SCIENCE↗

Magnesium Research and Technology Development

The Magnesium Research and Technical Development (MR&TD) project supports efforts to increase using magnesium in automotive applications, including improving technology, lowering costs and increasing the knowledge needed to enable alloy and manufacturing process optimization. MR&TD supports the U.S. Department of Energy (DOE)/United States Automotive Materials Partnership (USAMP) Magnesium Front End Research and Development (MFERD) project in collaboration with China and Canada. The MR&TD projects also maintains the magnesium bibliographic database at magnesium.pnl.gov.

36 MATERIALS SCIENCE↗

Characterization and formability of continuous-cast AZ31B magnesium alloy sheets

The goal of this work is to understand the inter-relationship between the initial properties of continuous-cast magnesium alloy (AZ31B) sheets and their subsequent formability and post-formed mechanical performance for use in cost-effective, lightweight, automotive body panels. As-received sheets, provided by the Automotive Metals Division (AMD-602) team, were characterized by surface roughness measurements using mechanical profilometry. The arithmetic mean deviation of profile (Ra) and the maximum two-point height of profile (Ry) of the as-received sheets ranged from ~0.2-2 μm and ~2-15 μm, respectively. Several commercial lubricants were evaluated by thermal analysis and the liquid phase of the lubricants was found to evaporate/decompose upon heating leaving behind a solid residue upon heating to temperatures exceeding ~125-150°C. Elevated temperature bending-under-tension (BUT) friction tests were conducted at 350°C and the coefficient-of-friction values ranged from a minimum of ~0.1 (for tungsten disulfide lubricant) to ~0.7 when no lubricant was used. These results, in conjunction with those from the forming trials conducted by the AMD-602 team, will be eventually used to determine the role of sheet-die friction in determining the formability of AZ31B sheets.

36 MATERIALS SCIENCE↗