Search NASA⌕ Search

Engineering topics

O'Neill, Hugh M.

Publications and source records attributed to O'Neill, Hugh M..

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Assessment of antimicrobial activity of melittin encapsulated in bicontinuous microemulsions prepared using renewable oils

Abstract The objective of this study is to demonstrate that melittin, a well‐studied antimicrobial peptide (AMP), can be solubilized in an active form in bicontinuous microemulsions (BMEs) that employ biocompatible oils. The systems investigated consisted of Winsor‐III and ‐IV BME phases composed of Water/Aerosol‐OT (AOT)/Polysorbate 85/isopropyl myristate and a Winsor‐IV BME employing Polysorbate 80 and limonene. We found that melittin resided in an α‐helix‐rich configuration and was in an apolar environment for the AOT/Polysorbate 85 Winsor‐III system, suggesting that melittin interacted with the surfactant monolayer and was in an active conformation. An apolar environment was also detected for melittin in the two Winsor‐IV systems, but to a lesser extent than the Winsor‐III system. Small‐angle X‐ray scattering analysis indicated that melittin at a concentration of 1.0 g/L aq in the aqueous subphase of the Winsor‐IV systems led to the greatest impact on the BME structure (e.g., decrease of quasi‐periodic repeat distance and correlation length and induction of interfacial fluidity). The antimicrobial activity of the Polysorbate 80 Winsor‐IV system was evaluated against several bacteria prominent in chronic wounds and surgical site infections (SSIs). Melittin‐free BMEs inhibited the growth of all tested bacteria due to its oil, limonene, while the inclusion of 1.0 g/L aq of melittin in the BMEs enhanced the activity against several bacteria. A further increase of melittin concentration in the BMEs had no further enhancement. These results demonstrate the potential utility of BMEs as a delivery platform for AMPs and other hydrophilic and lipophilic drugs to inhibit antibiotic‐resistant microorganisms in chronic wounds and SSIs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Small angle neutron scattering and lipidomic analysis of a native, trimeric PSI-SMALP from a thermophilic cyanobacteria

The use of styrene-maleic acid copolymers (SMAs) to produce membrane protein-containing nanodiscs without the initial detergent isolation has gained significant interest over the last decade. We have previously shown that a Photosystem I SMALP from the thermophilic cyanobacterium, Thermosynechococcus elongatus (PSI-SMALP), has much more rapid energy transfer and charge separation in vitro than detergent isolated PSI complexes. In this study, we have utilized small-angle neutron scattering (SANS) to better understand the geometry of these SMALPs. These techniques allow us to investigate the size and shape of these particles in their fully solvated state. Further, the particle's proteolipid core and detergent shell or copolymer belt can be interrogated separately using contrast variation, a capability unique to SANS. Here we report the dimensions of the Thermosynechococcus elongatus PSI-SMALP containing a PSI trimer. At ~1.5 MDa, PSI-SMALP is the largest SMALP to be isolated; our lipidomic analysis indicates it contains ~1300 lipids/per trimeric particle, >40-fold more than the PSI-DDM particle and > 100 fold more than identified in the 1JB0 crystal structure. Interestingly, the lipid composition to the PSI trimer in the PSI-SMALP differs significantly from bulk thylakoid composition, being enriched ~50 % in the anionic sulfolipid, SQDG. Finally, utilizing the contrast match point for the SMA 1440 copolymer, we also can observe the ~1 nm SMA copolymer belt surrounding this SMALP for the first time, consistent with most models of SMA organization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

New Technologies are Needed to Improve the Recycling and Upcycling of Waste Plastics

In their Editorial to the Special Issue on The Chemistry of Waste Plastics Upcycling, the Guest Editors Adam Guss, George Huber, Carol Lin, Xianzhi Meng, Hugh O'Neill, Arthur Ragauskas, Jia Wang, Yanqin Wang, and Frederik Wurm highlight some of the increasingly urgent efforts being made by chemists to address challenges related to the fate of plastics at the end of, their useful lives and the valorization of plastic waste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Incorporation of Membrane Proteins Into Bicontinuous Microemulsions Through Winsor‐III System‐Based Extraction

Abstract The membrane proteins (MP) α‐synuclein (ASYN) and bacteriorhodopsin (BR) were readily incorporated into bicontinuous microemulsions (BμEs) formed by two microemulsion systems: water/heptane/Aerosol‐OT (AOT)/CK‐2,13 and water/dodecane/sodium dodecyl sulfate (SDS)/1‐pentanol. (CK‐2,13 is an alkyl ethoxylate possessing two alkyl tail groups of carbon chain length 2 and 13 and an average degree of ethoxylation of 5.6.) MP were encapsulated in BμEs through preparation of Winsor‐III systems at optimal salinity, with the anionic surfactants AOT and SDS providing the driving force for extraction. Dissolution of ASYN in BμEs greatly increased the former's α‐helicity, similar to ASYN's behavior in the presence of biomembranes, while BμE‐ and vesicle‐encapsulated BR possessed similar secondary structure. Small‐angle neutron scattering (SANS) results clearly demonstrated the direct interaction of MP with the surfactants, resulting in a decrease of surface area per volume for surfactant monolayers due to decreased surfactant efficiency. The SANS signal for ASYN was isolated through the use of neutron contrast matching for the surfactants through partial deuteration of water and oil, one of the first reports of contrast matching for BμEs in the literature. The SANS results of the contrast‐matched sample reflected similar aggregation for ASYN in BμEs as was reported previously for vesicles and SDS solution. This study demonstrates the potential use of BμEs as MP host systems for conducting biochemical reactions such as the conversion of sunlight into adenosine triphosphate by BR and studying the fundamental behavior of MP, such as the role of ASYN dysfunction in Parkinson's disease, as well as for isolation and purification of MP via Winsor‐III‐based extraction.

Hayes, Douglas G.↗
DOE OSTI2020

Unusual zwitterionic catalytic site of SARS–CoV-2 main protease revealed by neutron crystallography

The main protease (3CL M pro ) from SARS–CoV-2, the etiological agent of COVID-19, is an essential enzyme for viral replication. 3CL M pro possesses an unusual catalytic dyad composed of Cys 145 and His 41 residues. A critical question in the field has been what the protonation states of the ionizable residues in the substrate-binding active-site cavity are; resolving this point would help understand the catalytic details of the enzyme and inform rational drug development against this pernicious virus. Here, we present the room-temperature neutron structure of 3CL M pro , which allowed direct determination of hydrogen atom positions and, hence, protonation states in the protease. We observe that the catalytic site natively adopts a zwitterionic reactive form in which Cys 145 is in the negatively charged thiolate state and His 41 is doubly protonated and positively charged, instead of the neutral unreactive state usually envisaged. The neutron structure also identified the protonation states, and thus electrical charges, of all other amino acid residues and revealed intricate hydrogen-bonding networks in the active-site cavity and at the dimer interface. The fine atomic details present in this structure were made possible by the unique scattering properties of the neutron, which is an ideal probe for locating hydrogen positions and experimentally determining protonation states at near-physiological temperature. Our observations provide critical information for structure-assisted and computational drug design, allowing precise tailoring of inhibitors to the enzyme's electrostatic environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Room-temperature X-ray crystallography reveals the oxidation and reactivity of cysteine residues in SARS-CoV-2 3CL Mpro: insights into enzyme mechanism and drug design

The emergence of the novel coronavirus SARS-CoV-2 has resulted in a worldwide pandemic not seen in generations. Creating treatments and vaccines to battle COVID-19, the disease caused by the virus, is of paramount importance in order to stop its spread and save lives. The viral main protease, 3CL M pro , is indispensable for the replication of SARS-CoV-2 and is therefore an important target for the design of specific protease inhibitors. Detailed knowledge of the structure and function of 3CL M pro is crucial to guide structure-aided and computational drug-design efforts. Here, the oxidation and reactivity of the cysteine residues of the protease are reported using room-temperature X-ray crystallography, revealing that the catalytic Cys145 can be trapped in the peroxysulfenic acid oxidation state at physiological pH, while the other surface cysteines remain reduced. Only Cys145 and Cys156 react with the alkylating agent N -ethylmaleimide. It is suggested that the zwitterionic Cys145–His45 catalytic dyad is the reactive species that initiates catalysis, rather than Cys145-to-His41 proton transfer via the general acid–base mechanism upon substrate binding. The structures also provide insight into the design of improved 3CL M pro inhibitors.

3CL Mpro↗
DOE OSTI2017

Dependence of Sum Frequency Generation (SFG) Spectral Features on the Mesoscale Arrangement of SFG-Active Crystalline Domains Interspersed in SFG-Inactive Matrix: A Case Study with Cellulose in Uniaxially Aligned Control Samples and Alkali-Treated Secondary Cell Walls of Plants

Vibrational sum frequency generation (SFG) spectroscopy can selectively detect not only molecules at two-dimensional (2D) interfaces but also noncentrosymmetric domains interspersed in amorphous three-dimensional (3D) matrixes. However, the SFG analysis of 3D systems is more complicated than 2D systems because more variables are involved. One such variable is the distance between SFG-active domains in SFG-inactive matrixes. In this study, we fabricated control samples in which SFG-active cellulose crystals were uniaxially aligned in an amorphous matrix. Assuming uniform separation distances between cellulose crystals, the relative intensities of alkyl (CH) and hydroxyl (OH) SFG peaks of cellulose could be related to the intercrystallite distance. The experimentally measured CH/OH intensity ratio as a function of the intercrystallite distance could be explained reasonably well with a model constructed using the theoretically calculated hyperpolarizabilities of cellulose and the symmetry cancellation principle of dipoles antiparallel to each other. In conclusion, this comparison revealed physical insights into the intercrystallite distance dependence of the CH/OH SFG intensity ratio of cellulose, which can be used to interpret the SFG spectral features of plant cell walls in terms of mesoscale packing of cellulose microfibrils.

09 BIOMASS FUELS↗
DOE OSTI2016

Method of tissue repair using a composite material

A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2013

Common processes drive the thermochemical pretreatment of lignocellulosic biomass

Lignocellulosic biomass, a potentially important renewable organic source of energy and chemical feedstock, resists degradation to glucose in industrial hydrolysis processes and thus requires expensive thermochemical pretreatments. Understanding the mechanism of biomass breakdown during these pretreatments will lead to more efficient use of biomass. By combining multiple probes of structure, sensitive to different length scales, with molecular dynamics simulations, we reveal two fundamental processes responsible for the morphological changes in biomass during steam explosion pretreatment: cellulose dehydration and lignin-hemicellulose phase separation. In conclusion, we further show that the basic driving forces are the same in other leading thermochemical pretreatments, such as dilute acid pretreatment and ammonia fiber expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2010

Electrically conductive cellulose composite

An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

30 DIRECT ENERGY CONVERSION↗