Search NASA⌕ Search

Engineering topics

O'Sullivan, Patrick Timothy

Publications and source records attributed to O'Sullivan, Patrick Timothy.

RCT: Module 2.06, Airborne Sampling Program/Methods [Slides]

The inhalation of radioactive particles is the largest cause of internal dose in workplace incidents. Airborne radioactivity measurements are necessary to ensure that the control measures are, and continue to be, effective. Typically, airborne radioactivity levels are maintained well below allowable levels to keep the total effective dose equivalent small.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Module 2.09: Environmental Monitoring [Slides]

Environmental monitoring plays a large role in the field of radiological control. It is used to estimate human population doses, determine the impact a site has on the environment, monitor for unplanned releases as well as quantifying planned releases, and gives us useful data in determining pathway data. This course will prepare the student with the skills necessary for RCT qualification.

54 ENVIRONMENTAL SCIENCES↗

RCT Module 2.11 Radiological Work Coverage [Slides]

Given the need to perform duties as an RCT, identify the required and recommended practices in radiological work coverage in accordance with RP-PROG-TP-200, Radiation Protection Manual, and P121, Radiation Protection

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Module 2.15 Radiological Considerations for First Aid [Presentation]

Standard first aid is applied before contamination control whenever it is considered to have life-saving value or is important to the patient for the relief of pain or prevention of disability. It is the obligation of all who assist a patient to render such aid within the limits of their training and qualifications.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Module 2.12: Shipment and Receipt of Radioactive Material [Slides]

The basis of regulations governing the packaging and shipping of radioactive material is to keep radioactive material from affecting the environment during transportation and to keep the environment from affecting the integrity of the radioactive material. The package itself is to be designed and constructed to be the effective barrier between the environment and the radioactive material; thus, most of the regulatory restrictions apply to the package and the method of shipment used to transport the package. To reduce any potential hazard, the regulatory requirements become more restrictive as the quantity, concentration, and potential hazard of the radioactive material increase.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Module 2.13: Radiological Incidents and Emergencies [Slides]

Emergency and incident response planning requires a detailed plan be in place. Each incident may be unique, and no plan can be expected to give an exact solution to every problem; however, a step-by-step approach for responding to a problem will ensure appropriate response.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Continuing Training: Item Release and RAM Control [Slides]

Welcome to the online RCT Continuing Training. This quarter’s topic will review the fundamental elements of radioactive material control and releasing items from controlled areas to include: evaluation if an item may be released and the actions necessary to perform a release from a controlled area.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Module 2.10 Access Control and Work Area Setup [Slides]

Terminal Objective: Given the need to perform duties as an RCT, recognize the requirements for access controls and work setup in radiological areas in accordance with RP-PROG-TP-200, Radiation Protection Manual and P-121, Radiation Protection .

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT: Module 2.07 Respiratory Protection [Slides]

Internal dosimetry controls require the use of engineering controls to prevent the internal deposition of radioactive and non-radiological contaminants. However, when engineering and administrative controls are not available or feasible, respiratory protection may be necessary. The RCT should know and apply the considerations used in determining the respiratory protection equipment that is most appropriate for the job. The inappropriate use of or the use of the wrong respiratory protection equipment may result in undesirable health effects.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT: Module 2.14 Personnel Decontamination [Slides]

In our work environment, one of the major concerns of radiological control is the prevention of personnel contamination. When personnel contamination has been identified, it is the responsibility of the RCTs to perform or oversee the decontamination of the individual using the best methods available. n this course we will address the methods used to detect personnel contamination, the factors that determine decontamination actions, the responsibilities of the RCTs, and the approved methods for decontamination of personnel. This course will prepare the student with the skills necessary for RCT qualification.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Continuing Training: Radiological Emergency Response

Objectives: 1) List the revised initial response and supplemental actions while responding to a major injury inside of a radiological area; 2) List the initial response and supplemental actions while responding to a minor injury inside of a radiological area; 3) List the initial response and supplemental actions for responding to a Continuous Air Monitoring (CAM) alarm; 4) List the initial response and supplemental actions for responding to a radioactive spill; 5) List the initial response and supplemental actions of responding to an Area Radiation Monitor (ARM) alarm; 6) List the initial response and supplemental actions of an Electronic Personal Dosimeter (EPD) dose and dose rate alarm; 7) List the initial response and supplemental actions of responding to a Stationary Contamination Monitor (SCM) alarm; 8) Identify the methods to perform personnel decontamination.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Continuing Training: RCT Job Coverage and CONOPS

RCT Continuing Training covering all of the necessary steps associated with RCT, and how conduct of operations ties in with this process. The terminal objective of this training is: Given the need to perform radiological job coverage, recognize the requirements to maintain radiological work control in accordance with P121, Radiation Protection, RP-PROG-TP-200, Radiation Protection Manual, and P315, Conduct of Operations.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Unit 1 Exam Review [Slides]

The terminal objective is stated as: Given the need to perform duties as an RCT, recognize fundamental concepts of radiation protection, in accordance with DOE-HDBK-1122, Radiation Control Technician Training .

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Continuing Training: Unit 1 Exam Review [Slides]

Terminal Objective: Given the need to perform duties as an RCT, recognize fundamental concepts of radiation protection, in accordance with DOE-HDBK-1122, Radiation Control Technician Training.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Continuing Training: Item Removal

Welcome to RCT Continuing Training. This quarter's topic will review the fundamental elements of removing items from controlled areas to include: evaluation if an item may be released and the actions necessary to perform a release from a controlled area. To complete this training, you will be required to view the online presentation and independently complete its associated quiz.

61 RADIATION PROTECTION AND DOSIMETRY↗

RCT Continuing Training: 3rd Quarter 2022 Online Presentation

This presentation focuses on "Continuing training for Radiological Control Technicians (RCTs) designed to meet the training requirements of DOE-HDBK-1122-2009." The report contains learning objectives and modules with directions on how to navigate through the modules and course.

61 RADIATION PROTECTION AND DOSIMETRY↗