Search NASA⌕ Search

Engineering topics

O. S. Barnouin

Publications and source records attributed to O. S. Barnouin.

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Investigating the Physical Modification of the Bennu Sample During Entry, Descent, and Landing

On September 24, 2023, the OSIRIS-REx Sample Return Capsule (SRC) entered Earth’s atmosphere and landed in the Utah Test and Training Range (UTTR). Preliminary examination of the returned Bennu sample has confirmed that OSIRIS-REx sample mass exceeds the mission requirement of 60 g of material. The sample consists of particles that range from a few centimeters to microscopic fines. During the SRC’s entry, descent, and landing (EDL) sequence, it may have experienced (i) peak decelerations of 10s of g (ii) tumbling, and (iii) touchdown at approximately 10 m/s, which could have induced physical modification of the sample. In addition, the act of sampling may have altered or biased the physical properties of the collected materials. Here, we investigate the likelihood and extent of physical modification of the sample between collection and return using observations and modeling. This work addresses the mission’s hypothesis 12, which concerns, in part, the modification of the sample during collection and Earth entry.

asteroid↗
NASA NTRS2022

Crater population on asteroid (101955) Bennu indicates impact armouring and a young surface

The impactor-to-crater size scaling relationships that enable estimates of planetary surface ages rely on an accurate formulation of impactor–target physics. An armouring regime, specific to rubble-pile surfaces, has been proposed to occur when an impactor is comparable in diameter to a target surface particle (for example, a boulder). Armouring is proposed to reduce crater diameter, or prevent crater formation in the asteroid surface, at small crater diameters. Here, using measurements of 1,560 craters on the rubble-pile asteroid (101955) Bennu, we show that the boulder population controls a transition from crater formation to armouring at crater diameters ~2–3m, below which crater formation in the bulk surface is increasingly rare. By combining estimates of impactor flux with the armouring scaling relationship, we find that Bennu’s crater retention age (surface age derived from crater abundance) spans from 1.6–2.2Myr for craters less than a few meters to ~10–65Myr for craters >100m in diameter, reducing the maximum surface age by a factor of >15 relative to previous estimates. The range of crater retention ages, together with latitudinal variations in large-crater spatial density, indicate that ongoing resurfacing processes render the surface many times younger than the bulk asteroid.

E. B. Bierhaus↗
NASA NTRS2020

Hemispherical differences in the shape and topography of asteroid (101955) Bennu

We investigate the shape of near-Earth asteroid (101955) Bennu by constructing a high-resolution (20 cm) global digital terrain model from laser altimeter data. By modeling the northern and southern hemispheres separately, we find that longitudinal ridges previously identified in the north extend into the south but are obscured there by surface material. In the south, more numerous large boulders effectively retain surface materials and imply a higher average strength at depth to support them. The north has fewer large boulders and more evidence of boulder dynamics (toppling and downslope movement) and surface flow. These factors result in Bennu's southern hemisphere being rounder and smoother, whereas its northern hemisphere has higher slopes and a less regular shape. We infer an originally asymmetric distribution of large boulders followed by a partial disruption, leading to wedge formation in Bennu's history.

M. G. Daly↗
NASA NTRS2019

Digital terrain mapping by the OSIRIS-REx mission

The Origins, Spectral Interpretation, Resource Identification, Security–Regolith Explorer mission will return a sample to Earth from asteroid (101955) Bennu. Digital terrain models (DTMs) of the asteroid, and products enabled by them, are key to understanding the origin and evolution of the asteroid, providing geological and geophysical context for the sample, maximizing the amount of sample returned, navigating the spacecraft, and ensuring the safety of the spacecraft during sampling. The mission has two approaches for producing these DTMs: a camera-based approach and a lidar-based approach. We provide an overview of the methods used for these two approaches and how they fit into the originally planned mission. We also discuss a summary of tests using these plans to evaluate the expected performance of the DTMs and describe the data products derived from them.

O. S. Barnouin↗
NASA NTRS2019

The unexpected surface of asteroid (101955) Bennu

NASA’S Origins, Spectral Interpretation, Resource Identification and Security-Regolith Explorer (OSIRIS-REx) spacecraft recently arrived at the near-Earth asteroid (101955) Bennu, a primitive body that represents the objects that may have brought prebiotic molecules and volatiles such as water to Earth1. Bennu is a low-albedo B-type asteroid2 that has been linked to organic-rich hydrated carbonaceous chondrites3. Such meteorites are altered by ejection from their parent body and contaminated by atmospheric entry and terrestrial microbes. Therefore, the primary mission objective is to return a sample of Bennu to Earth that is pristine—that is, not affected by these processes4. The OSIRIS-REx spacecraft carries a sophisticated suite of instruments to characterize Bennu’s global properties, support the selection of a sampling site and document that site at a sub-centimetre scale5,6,7,8,9,10,11. Here we consider early OSIRIS-REx observations of Bennu to understand how the asteroid’s properties compare to pre-encounter expectations and to assess the prospects for sample return. The bulk composition of Bennu appears to be hydrated and volatile-rich, as expected. However, in contrast to pre-encounter modelling of Bennu’s thermal inertia12 and radar polarization ratios13—which indicated a generally smooth surface covered by centimetre-scale particles—resolved imaging reveals an unexpected surficial diversity. The albedo, texture, particle size and roughness are beyond the spacecraft design specifications. On the basis of our pre-encounter knowledge, we developed a sampling strategy to target 50-metre-diameter patches of loose regolith with grain sizes smaller than two centimetres4. We observe only a small number of apparently hazard-free regions, of the order of 5 to 20 metres in extent, the sampling of which poses a substantial challenge to mission success.

D. S. Lauretta↗
NASA NTRSDate not supplied

Mapping Albedo Variations to Constrain the History of the Didymos System From Dart and Liciacube Observations

The Double Asteroid Redirection Test (DART) relied on its high-resolution, broad-band camera DRACO to successfully execute its impact experiment on September 26, 2022. While targeting Dimorphos, the ~150 m diameter moon of the Didymos binary asteroid system, DART also imaged the ~760 m diameter primary. LICIACube, a ride-along CubeSat released from DART prior to impact, carried two cameras, LEIA and LUKE, pan and wide-angle RGB color cameras, respectively, to witness the impact and also image both bodies. In addition to critical data that enabled and observed the impact, these cameras provided the highest spatial resolution data of any binary asteroid system and the first for near-Earth asteroids. Mapping and comparing albedo units on both the primary and secondary and placing them in the context of other S-type asteroids will help constrain the physical relationships and prior interactions between the two bodies and thus reveal the formational and evolutionary history of the Didymos system.

J. M. Sunshine↗
NASA NTRSDate not supplied

Characterization of the Dart Impact Site on Dimorphos

The Double Asteroid Redirection Test (DART) spacecraft impacted Dimorphos, the moon of the (65803) Didymos asteroid system, on 26 September 2022 at 23:14:24.183 UTC. The spacecraft mass at the time of impact was 579.4 ± 0.7 kg, and the impact velocity was 6.1449 ± 0.0003 km/s, resulting in an impact energy of 10.94 ± 0.01 GJ. The impact changed the orbital period of Dimorphos relative to Didymos by -33.0 ± 1.0 minutes, and the initial estimate of the resulting momentum enhancement factor, β, is between 2.2 and 4.9, depending on Dimorphos’s mass.

C. M. Ernst↗