Search NASA⌕ Search

Engineering topics

ORNL

Publications and source records attributed to ORNL.

At least 19 records

Component-specific electromechanical response in a ferroelectric/dielectric superlattice.

The electronic and electromechanical properties of complex oxide superlattices are closely linked to the evolution of the structure and electrical polarization of the component layers in applied electric fields. Efforts to deduce the responses of the individual components of the superlattice to applied fields have focused on theoretical approaches because of the limitations of available experimental techniques. Time-resolved x-ray microdiffraction provides a precise crystallographic probe of each component using the shift in wave vector and change in intensity of superlattice satellite reflections. We report in detail the methods to measure and analyze the x-ray diffraction patterns in applied electric field and their application to a 2-unit-cell BaTiO{sub 3}/4-unit-cell CaTiO{sub 3} superlattice. We find that the overall piezoelectric distortion is shared between the two components. Theoretical predictions of the electromechanical properties of a superlattice with the same composition constrained to tetragonal symmetry are in excellent agreement with the experiments. Lattice instability analysis, however, suggests that the low-temperature ground state could exhibit antiferrodistortive rotations of TiO{sub 6} octahedra within and/or at the interfaces of the CaTiO{sub 3} component.

36 MATERIALS SCIENCE↗

Local electronic and magnetic studies of an artificial La{sub 2}FeCr{sub 6}.

Through the utilization of element-resolved polarized x-ray probes, the electronic and magnetic state of an artificial La{sub 2}FeCrO{sub 6} double perovskite were explored. Applying unit-cell level control of thin film growth on SrTiO{sub 3}(111), the rock salt double perovskite structure can be created for this system, which does not have an ordered perovskite phase in the bulk. We find that the Fe and Cr are in the proper 3{sup +} valence state, but, contrary to previous studies, the element-resolved magnetic studies find the moments in field are small and show no evidence of sizable magnetic moments in the remanent state. Based on our findings, we argue that the ground state is consistent with canted antiferromagnetic order.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An assessment of the contributing factors to the superior properties of a nanostructured steel using in situ high-energy x-ray diffraction.

In contrast to most nanostructured materials, outstanding mechanical property has been demonstrated in a nanostructured metastable austenitic steel, owing to the new characteristics of deformation-induced martensitic transformation. In this paper, by employing an in situ high-energy X-ray diffraction technique, we explore these characteristics by examining factors from the load partitioning, Lueders banding, to texture development. It was found that the martensitic transformation was mainly driven through Lueders band propagation. Marked load transfer takes place from austenite to martensite as Lueders band propagates, and continues into the homogeneous deformation regime. The texture development is mostly contributed by martensitic transformation, but dislocation-based plasticity also plays a role. The effective load partitioning along with the deformability of martensite promotes sample ductility.

36 MATERIALS SCIENCE↗

Effects of vacancies on phonon entropy of B2 FeAl

The phonon density of states (DOS) and phonon entropy of B2 FeAl were determined as functions of the Fe site vacancy concentration using several scattering techniques and were computed from first principles. Measurements at elevated temperature and pressure were performed to explore volume effects, test the usefulness of the quasiharmonic (QH) approximation, and provide comparison for the first-principles calculations. The average temperature and pressure dependencies of phonons were consistent with the QH model. The decrease in specific volume associated with the introduction of vacancies causes a stiffening of the DOS that was captured well with the experimentally determined Grueneisen parameter. Features associated with vacancies in the DOS are not well explained by this model, however, especially in the gap between the acoustic and optic branches. First-principles calculations indicated that these modes are primarily associated with vibrations of Al atoms in the first-nearest-neighbor shell of the vacancy, with some vibration amplitude also involving the second-nearest-neighbor Fe atoms. At the vacancy concentrations of study, the phonon entropy of vacancy formation was found to be approximately -1.7k{sub B}/atom, about half as large and of opposite sign as the configurational entropy of vacancy formation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Uranium transformations in static microcosms.

Elucidation of complex biogeochemical processes and their effects on speciation of U in the subsurface is critical for developing remediation strategies with an understanding of stability. We have developed static microcosms that are similar to bioreduction process studies in situ under laminar flow conditions or in sediment pores. Uranium L{sub 3}-edge X-ray absorption near-edge spectroscopy analysis with depth in the microcosms indicated that transformation of U{sup VI} to U{sup IV} occurred by at least two distinct processes. Extended X-ray absorption fine structure (EXAFS) analysis indicated that initial U{sup VI} species associated with C- and P-containing ligands were transformed to U{sup IV} in the form of uraninite and U associated with Fe-bound ligands. Microbial community analysis identified putative Fe{sup III} and sulfate reducers at two different depths in the microcosms. The slow reduction of U{sup VI} to U{sup IV} may contribute the stability of U{sup IV} within microcosms at 11 months after a decrease in bioreducing conditions due to limited electron donors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced flux pinning in MOCVD-YBCO films through Zr additions : systematic feasibility studies.

Systematic effects of Zr additions on the structural and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) films deposited by metal-organic chemical vapor deposition (MOCVD) have been investigated. Detailed characterization, conducted by coordinated transport, x-ray diffraction, scanning and transmission electron microscopy analyses, and imaging Raman microscopy have revealed trends in the resulting property/performance correlations of these films with respect to varying mole percentages (mol%) of added Zr. For compositions {le} 7.5 mol%, Zr additions lead to improved in-field critical current density, as well as extra correlated pinning along the c-axis direction of the YBCO films via the formation of columnar, self-assembled stacks of BaZrO{sub 3} nanodots.

36 MATERIALS SCIENCE↗

Raman and x-ray absorption spectroscopy characterization of Zr-doped MOCVD YBa{sub 2}Cu{sub 3}O{sub 6+{delta}}.

Metal-organic chemical vapor deposited YBa{sub 2}Cu{sub 3}O{sub 6+{delta}} (YBCO) films (about 0.9 {micro}m thick) containing varying amounts of added zirconium were examined by Raman microscopy and synchrotron x-ray absorption spectroscopy. The self-field and in-field (1 T, B {parallel} c)J{sub c} performance of the YBCO films at 77 K (reported by the group at Oak Ridge National Laboratory that fabricated the samples) exhibited an increase on going from 0 mol% (m/o) Zr-added to 2.5 m/o Zr-added but then decreased sharply with increasing Zr content. Raman measurements on these films showed that the added Zr had little effect on YBCO cation disorder up to about 7.5 m/o Zr-added. Cation disorder increased while Ba-Cu-O content remained relatively constant for Zr additions {ge} 7.5 m/o. In the region of sharpest descent of J{sub c} with increasing Zr content (2.5-7.5 m/o Zr-added) neither the cation disorder nor the Ba-Cu-O content showed a systematic variation with J{sub c}. Zirconium K edge x-ray absorption near-edge spectroscopy revealed that virtually all of the added Zr in each sample was present as a BaZrO{sub 3}-like phase (BZO). The J{sub c} performance of the Zr-added films showed a high correlation with the variations in the next-nearest-neighbor Zr-M (M = Zr, Y) scattering path amplitude from the extended x-ray absorption fine structure (EXAFS) and the critical temperature over the full range of Zr additions and with cation disorder at the higher Zr-added levels (>7.5 m/o). There was no obvious correlation with the amount of residual barium cuprate or CuO. Approximate ranges for the BZO particle dimensions estimated from the EXAFS data indicated that the mean particle size gets larger with increasing Zr addition.

43 PARTICLE ACCELERATORS↗

Examination of Through-Thickness/Through-Time Phase Evolution during an MOD-Type REBCO Precursor Conversion Using Raman Microsscopy

Through-thickness/through-time composition analyses were made on REBa{sub 2}Cu{sub 3}O{sub 6+x} (REBCO) films prepared from metal-organic deposited (MOD) precursors on a RABiTS (rolling-assisted biaxially textured substrate) template. Y Dy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 6 + x} films were fabricated either by a single precursor coating or by two separate, equivalent precursor coatings with an intermediate decomposition. Specimens were quenched at selected times along a heat treatment profile that simulated conditions used by American Superconductor, then examined by Raman microscopy along mechanically milled slopes through the REBCO films. Upon reaching the reaction temperature TR, the precursor initially transforms into a (Y, Dy){sub 2}Cu{sub 2}O{sub 5}, CuO, Cu{sub 2}O, and RE-Ba-F-O phase mix, and this is followed shortly by substrate level REBCO formation that propagates upwards through time. Our results indicate that (1) the single layer (SL) and double layer (DL) films (both {approx} 1.2 {mu}m thick) react to completion at about the same rate and arrive at a similar final composition and (2) some residual Ba-Cu-O phases persist near the top of the fully reacted films. The performance of the SL film was moderately better than that of the DL film, seemingly due to better through-thickness REBCO texture as determined using x-ray diffraction.

36 MATERIALS SCIENCE↗

Anisotropic neutron spin resonance in superconducting BaFe{sub 1.9}Ni{sub 0.1}As{sub 2}.

We use polarized inelastic neutron scattering to show that the neutron spin resonance below T{sub c} in superconducting BaFe{sub 1.9}Ni{sub 0.1}As{sub 2} (T{sub c} = 20 K) is purely magnetic in origin. Our analysis further reveals that the resonance peak near 7 meV only occurs for the planar response. This challenges the common perception that the spin resonance in the pnictides is an isotropic triplet excited state of the singlet Cooper pairs, as our results imply that only the S{sub 001} = {+-} 1 components of the triplet are involved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Piezoelectricity in the Dielectric Component of Nanoscale Dielectric-Ferroelectric Superlattices

The origin of the functional properties of complex oxide superlattices can be resolved using time-resolved synchrotron x-ray diffraction into contributions from the component layers making up the repeating unit. The CaTiO{sub 3} layers of a CaTiO{sub 3}/BaTiO{sub 3} superlattice have a piezoelectric response to an applied electric field, consistent with a large continuous polarization throughout the superlattice. The overall piezoelectric coefficient at large strains, 54 pm/V, agrees with first-principles predictions in which a tetragonal symmetry is imposed on the superlattice by the SrTiO{sub 3} substrate.

36 MATERIALS SCIENCE↗

Physical and mechanical metallurgy of high purity Nb for accelerator cavities

In the past decade, high Q values have been achieved in high purity Nb superconducting radio frequency (SRF) cavities. Fundamental understanding of the physical metallurgy of Nb that enables these achievements is beginning to reveal what challenges remain to establish reproducible and cost-effective production of high performance SRF cavities. Recent studies of dislocation substructure development and effects of recrystallization arising from welding and heat treatments and their correlations with cavity performance are considered. With better fundamental understanding of the effects of dislocation substructure evolution and recrystallization on electron and phonon conduction, as well as the interior and surface states, it will be possible to design optimal processing paths for cost-effective performance using approaches such as hydroforming, which minimizes or eliminates welds in a cavity.

43 PARTICLE ACCELERATORS↗