Search NASA⌕ Search

Engineering topics

Oaida, Bogdan V.

Publications and source records attributed to Oaida, Bogdan V..

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

A Framework for Writing Science Measurement Requirements and its Application to the Europa Multiple Flyby Mission

Science-engineering communication is critical to the success of any science-driven mission. The process of building this understanding relies on a shared language for communicating science needs and engineering results, which can be particularly difficult on large space-science missions where many different institutions contribute to the science team. The Science Traceability Matrix can be used to formalize this communication pathway, but it has limited use in the development of the science requirements flow down, and vary in format, scope and content from mission to mission. There are many guidelines on developing well-constructed requirements in general, but very little is published on how to actually write these science-driven requirements in a systematic way. This paper discusses the measurement-domain science traceability and alignment framework, or M-STAF, which was developed to help frame the conversation between scientists and engineers in the development of science measurement requirements. The MSTAF provides a common language that can be used to ensure consistency across instruments, completeness in the coverage of the requirements, and traceability of the engineering work to the science objectives of the project. This work discusses the framework in the context of other communication tools, how it can be implemented on a flight project, and provides examples of how it might be used to improve the measurement requirements set for a project. The general framework is presented through the lens of its potential application on the planned Europa Mission.

Oaida, Bogdan V.↗
NASA NTRS2015

Achieving Operational Two-Way Laser Acquisition for OPALS Payload on the International Space Station

The Optical PAyload for Lasercomm Science (OPALS) experiment was installed on the International Space Station (ISS) in April 2014. Developed as a technology demonstration, its objective was to experiment with space-to-ground optical communications transmissions from Low Earth Orbit. More than a dozen successful optical links were established between a Wrightwood, California-based ground telescope and the OPALS flight terminal from June 2014 to September 2014. Each transmission required precise bi-directional pointing to be maintained between the space-based transmitter and ground-based receiver. This was accomplished by acquiring and tracking a laser beacon signal transmitted from the ground telescope to the OPALS flight terminal on the ISS. OPALS demonstrated the ability to nominally acquire the beacon within three seconds at 25deg elevation and maintain lock within 140 μrad (3(sigma)) for the full 150-second transmission duration while slewing at rates up to 1deg/sec. Additional acquisition attempts in low elevation and weather-challenged conditions provided valuable insight on the optical link robustness under off-nominal operational conditions.

optical communications↗
NASA NTRS2015

Upwelling Radiance at 976 nm Measured from Space Using a CCD Camera

The Optical Payload for Lasercomm Science (OPALS) Flight System on-board the International Space Station uses a charge coupled device (CCD) camera for receiving a beacon laser from Earth. Relative measurements of the background contributed by upwelling radiance under diverse illumination conditions and varying terrain is presented. In some cases clouds in the field-of-view allowed a comparison of terrestrial and cloud-top upwelling radiance. In this paper we will report these measurements and examine the extent of agreement with atmospheric model predictions.

Biswas, Abhijit↗
NASA NTRS2015

Optical PAyload for Lasercomm Science (OPALS) link validation

Recently several day and nighttime links under diverse atmospheric conditions were completed using the Optical Payload for Lasercomm Science (OPALS) flight system on-board the International Space Station (ISS). In this paper we compare measured optical power and its variance at either end of the link with predictions that include atmospheric propagation models. For the 976 nm laser beacon mean power transmitted from the ground to the ISS the predicted mean irradiance of 10's of microwatts per square meter close to zenith and its decrease with range and increased air mass shows good agreement with predictions. The irradiance fluctuations sampled at 100 Hz also follow the expected increase in scintillation with air mass representative of atmospheric coherence lengths at zenith at 500 nm in the 3-8 cm range. The downlink predicted power of 100's of nanowatts was also reconciled within the uncertainty of the atmospheric losses. Expected link performance with uncoded bit-error rates less than 1E-4 required for the Reed-Solomon code to correct errors for video, text and file transmission was verified. The results of predicted and measured powers and fluctuations suggest the need for further study and refinement.

ISS↗
NASA NTRS2014

OPALS: Mission System Operations Architecture for an Optical Communications Demonstration on the ISS

In spring 2014, the Optical PAyload for Lasercomm Science (OPALS) will launch to the International Space Station (ISS) to demonstrate space-to-ground optical communications. During a 90-day baseline mission, OPALS will downlink high quality, short duration videos to the Optical Communications Telescope Laboratory (OCTL) in Wrightwood, California. To achieve mission success, interfaces to the ISS payload operations infrastructure are established. For OPALS, the interfaces facilitate activity planning, hazardous laser operations, commanding, and telemetry transmission. In addition, internal processes such as pointing prediction and data processing satisfy the technical requirements of the mission. The OPALS operations team participates in Operational Readiness Tests (ORTs) with external partners to exercise coordination processes and train for the overall mission. The tests have provided valuable insight into operational considerations on the ISS.

Abrahamson, Matthew J.↗
NASA NTRS2014

Opals: Mission System Operations Architecture for an Optical Communications Demonstration on the ISS

In April of 2014, the Optical PAyload for Lasercomm Science (OPALS) Flight System (FS) launched to the International Space Station (ISS) to demonstrate space-to-ground optical communications. During a planned 90-day baseline mission, the OPALS FS will downlink high quality, short duration videos to the Optical Communications Telescope Laboratory (OCTL) ground station in Wrightwood, California. Interfaces to the ISS payload operations infrastructure have been established to facilitate activity planning, hazardous laser operations, commanding, and telemetry transmission. In addition, internal processes, such as pointing prediction and data processing, satisfy the technical requirements of the mission. The OPALS operations team participates in Operational Readiness Tests (ORTs) with external partners to exercise coordination processes and train for the overall mission. The ORTs have provided valuable insight into operational considerations for the instrument on the ISS.

Technology Demonstration↗
NASA NTRS2010

NASA 2009 HyspIRI Science Workshop Report

From August 11 13, 2009, NASA held a three-day workshop to consider the Hyperspectral Infrared Imager (HyspIRI) mission recommended for implementation by the 2007 report from the U.S. National Research Council Earth Science and Applications from Space: National Imperatives for the Next Decade and Beyond (also known as the Earth Science Decadal Survey or, simply, the Decadal Survey). The open workshop provided a forum to present the observational requirements for the mission and assess its anticipated impact on scientific and operational applications; the open forum also offered the opportunity to obtain feedback from the broader scientific community on the mission concept. The workshop participants concluded that the HyspIRI mission would provide a significant new capability to study ecosystems and natural hazards at spatial scales relevant to human resource use. In addition, participants reviewed the Draft Preliminary HyspIRI Mission Level 1 Requirements and confirmed that they were achievable with the mission concept presented and would provide the necessary data needed to address the science questions identified for the mission and by the Decadal Survey. These requirements could be met using the reference instrument designs and be implemented through the use of current technology. The workshop participants, like the Decadal Survey itself, strongly endorsed the need for the HyspIRI mission and felt the mission, as defined, would accomplish the intended science.

Oaida, Bogdan V.↗