Search NASA⌕ Search

Engineering topics

Oh, Junho

Publications and source records attributed to Oh, Junho.

Dissolvable Template Nanoimprint Lithography: A Facile and Versatile Nanoscale Replication Technique

Nanoimprinting lithography (NIL) is a next-generation nanofabrication method, capable of replicating nanostructures from original master surfaces. In this work, we develop highly scalable, simple, and nondestructive NIL using a dissolvable template. Termed dissolvable template nanoimprinting lithography (DT-NIL), our method utilizes an economic thermoplastic resin to fabricate nanoimprinting templates, which can be easily dissolved in simple organic solvents. Additionally, we used the DT-NIL method to replicate cicada wings which have surface nanofeatures of ~100 nm in height. The master, template, and replica surfaces showed a >~94% similarity based on the measured diameter and height of the nanofeatures. The versatility of DT-NIL was also demonstrated with the replication of re-entrant, multiscale, and hierarchical features on fly wings, as well as hard silicon wafer-based artificial nanostructures. The DT-NIL method can be performed under ambient conditions with inexpensive materials and equipment. Our work opens the door to opportunities for economical and high-throughput nanofabrication processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Composite Structured Surfaces for Durable Dropwise Condensation

Dropwise condensation of steam on hydrophobic substrates has a 10X higher heat transfer coefficient compared to filmwise condensation. To promote dropwise condensation, low surface energy hydrophobic coatings (polymers) are typically utilized. The low intrinsic thermal conductivity (k < 1 W/(m · K)) of polymers, coupled with high heat transfer coefficient of dropwise condensation (100 kW/(m 2 · K)), necessitates that the coating be thin (< 1µm) in order to avoid reducing the overall heat exchanger conductance. However, thin polymeric films easily degrade. The two opposing requirements result in the need for optimization between the durability (thick coating) and the heat transfer (thin coating). To enable high thermal conductivity in thicker coatings, we develop metal-polymer structured surfaces. By using porous structures as inter-connected heat-conducting backbones that are filled with hydrophobic materials, we enable tuning of the coating effective thermal conductivity and surface energy. Three metal structures were studied; micro/nanowires, inverse opals, and sintered spheres. Heat transfer performance was calculated using three-dimensional finite element method simulations with two distinct boundary conditions; convection at the walls and isothermal walls. Interestingly, the overall conductance shows up to 40% difference depending on the boundary condition used in calculating the composite coating effective thermal conductivity. We use our model to predict the heat transfer performance as a function of metal fraction by volume and by surface area for condensation. By coupling our thermal simulations with a previously verified analytical model for predicting wetting behavior on heterogeneous surfaces, we propose a regime map to predict dropwise-to-filmwise transition. Furthermore, our work not only forms a starting point for the development of durable dropwise condensing surfaces, it identifies important considerations needed for computing effective thermal conductivity of composites.

42 ENGINEERING↗

Molecular and Topographical Organization: Influence on Cicada Wing Wettability and Bactericidal Properties

Numerous natural surfaces have micro/nanostructures that result in extraordinary functionality, such as superhydrophobicity, self-cleaning, antifogging, and antimicrobial properties. One such example is the cicada wing, where differences in nanopillar geometry and composition among species can impact and influence the degree of exhibited properties. To understand the relationships between surface topography and chemical composition with multifunctionality, the wing properties of Neotibicen pruinosus (superhydrophobic) and Magicicada cassinii (hydrophobic) cicadas are investigated at time points after microwave-assisted extraction of surface molecules to characterize the chemical contribution to nanopillar functionality. Electron microscopy of the wings throughout the extraction process illustrates nanoscale topographical changes, while concomitant changes in hydrophobicity, bacterial fouling, and bactericidal properties are also measured. Extract analysis reveals the major components of the nanostructures to be fatty acids and saturated hydrocarbons ranging from C17 to C44. Effects on the antimicrobial character of a wing surface with respect to the extracted chemicals suggest that the molecular composition of the nanopillars plays both a direct and an indirect role in concert with nanopillar geometry. The data presented not only correlates the nanopillar molecular organization to macroscale functional properties, but it also presents design guidelines to consider during the replication of natural nanostructures onto engineered substrates to induce desired properties.

59 BASIC BIOLOGICAL SCIENCES↗

Ultra-scalable Multifunctional Nanoengineered Cu and Al surfaces for anti-biofouling applications

Biofouling disrupts surface functionality and integrity of engineered substrates. A variety of natural materials such as plant leaves and insect wings have evolved sophisticated physical mechanisms capable of preventing biofouling. Over the past decade, several reports have pinpointed nanoscale surface topography as an important regulator of the surface adhesion and growth of bacteria. Although artificial nanoengineered features have been used to create bactericidal materials that kill adhered bacteria, functional surfaces capable of synergistically providing anti-biofouling and bactericidal properties remain to be developed. Furthermore,fundamental questions pertaining to the need for intrinsic hydrophobicity to achieve bactericidal performance or the crucial role played by structure length scale (nano vs. micro), remain to be answered. Here, we demonstrate highly scalable, cost effective, and efficient nanoengineered multifunctional surfaces that possess both anti-biofouling and bactericidal properties on industrially relevant copper (Cu) and aluminum (A1) substrates. We characterize biofouling and bactericidal performance using a combination of scanning electron microscopy (SEM), atomic force microscopy (AFM), live-dead bacterial staining and imaging, as well as solution phase measurements of bacterial viability. SEM results showed that nanostructures created on both Cuand Al were capable of physical deformation of adhered E. coli . Bacterial viability measurements on both Cu and Al indicated a complex interaction between the anti-biofouling and bactericidal nature of these materials and their surface topography, chemistry, and structure. We found that nano-length structures, as compared to micro-length, provide improved bactericidal properties,and that increased hydrophobicity greatly decreased the of adhered bacteria while also modestly increasing the surfaces killing capacity. This study provides additional insights into design guidelines for materials that are not only bactericidal, but also anti-biofouling, using a simple and economic method.

59 BASIC BIOLOGICAL SCIENCES↗

Advanced Thermal Management for High Power Density Electronics

Demand for enhanced cooling technologies within various commercial and consumer applications has increased in recent decades due to electronic devices becoming more energy dense. This study demonstrates jumping-droplet based electric-field-enhanced (EFE) condensation as a potential method to achieve active hot spot cooling in electronic devices. To test the viability of EFE condensation, we developed an experimental setup to remove heat via droplet evaporation from single and multiple high power gallium nitride (GaN) transistors acting as local hot spots (4.6 mm x 2.6 mm). An externally powered circuit was developed to direct jumping droplets from a copper oxide (CuO) nanostructured superhydrophobic surface to the transistor hot spots by applying electric fields between the condensing surface and the transistor. Heat transfer measurements were performed in ambient air (22-25°C air temperature, 20-45% relative humidity) to determine the effects of gap spacing (2-4 mm), electric field (50-250 V/cm), and heat flux (demonstrated to 13 W/cm 2 ). EFE condensation was shown to enhance the heat transfer from the local hot spot by ≈ 200% compared to cooling without jumping and by 20% compared to non-EFE jumping. Dynamic switching of the electric field for a two-GaN system reveals the potential for active cooling of mobile hot spots. The opportunity for further cooling enhancement by the removal of non-condensable gases promises hot spot heat dissipation rates approaching 120 W/cm 2 . This work provides a framework for the development of active jumping droplet based vapor chambers and heat pipes capable of spatial and temporal thermal dissipation control.

42 ENGINEERING↗

Jumping-droplet electronics hot-spot cooling

Demand for enhanced cooling technologies within various commercial and consumer applications has increased in recent decades due to electronic devices becoming more energy dense. This study demonstrates jumping-droplet based electric-field-enhanced (EFE) condensation as a potential method to achieve active hot spot cooling in electronic devices. To test the viability of EFE condensation, we developed an experimental setup to remove heat via droplet evaporation from single and multiple high power gallium nitride (GaN) transistors acting as local hot spots (4.6 mm x 2.6 mm). An externally powered circuit was developed to direct jumping droplets from a copper oxide (CuO) nanostructured superhydrophobic surface to the transistor hot spots by applying electric fields between the condensing surface and the transistor. Heat transfer measurements were performed in ambient air (22-25°C air temperature, 20-45% relative humidity) to determine the effect of gap spacing (2-4 mm), electric field (50-250 V/cm), and heat flux (demonstrated to 13 W/cm 2 ). EFE condensation was shown to enhance the heat transfer from the local hot spot by ≈ 200% compared to cooling without jumping and by 20% compared to non-EFE jumping. Dynamic switching of the electric field for a two-GaN system reveals the potential for active cooling of mobile hot spots. The opportunity for further cooling enhancement by the removal of non-condensable gases promises hot spot heat dissipation rates approaching 120 W/cm 2 . Finally, this work provides a framework for the development of active jumping droplet based vapor chambers and heat pipes capable of spatial and temporal thermal dissipation control.

36 MATERIALS SCIENCE↗