Search NASA⌕ Search

Engineering topics

Ohara, Yoshikazu

Publications and source records attributed to Ohara, Yoshikazu.

Three-dimensional broadband nonlinear phased array imaging

System include an ultrasonic transducer configured to couple to a nondestructive testing (NDT) sample and configured to produce and direct an ultrasonic probe wave at a selected frequency into a subsurface region of the NDT sample, a 3D laser scanning vibrometer configured to direct a detection beam in a scan area on a surface of the NDT sample and to receive a return beam from the scan area, and to detect, based on the return beam, a 3D motion of the surface across a wideband frequency range, and a processor, and a memory configured with instructions that, when executed by the processor, cause the processor to produce sub-surface image data of the NDT sample at multiple harmonics of the selected frequency in the wideband frequency range based on the detected 3D surface motion, wherein the sub-surface image data describes a nonlinear defect response produced in the NDT sample by interaction of the ultrasonic probe wave with the subsurface region.

Remillieux, Marcel↗

Exploring 3D elastic-wave scattering at interfaces using high-resolution phased-array system

The elastic-wave scattering at interfaces, such as cracks, is essential for nondestructive inspections, and hence, understanding the phenomenon is crucial. However, the elastic-wave scattering at cracks is very complex in three dimensions since microscopic asperities of crack faces can be multiple scattering sources. We propose a method for exploring 3D elastic-wave scattering based on our previously developed high-resolution 3D phased-array system, the piezoelectric and laser ultrasonic system (PLUS). We describe the principle of PLUS, which combines a piezoelectric transmitter and a 2D mechanical scan of a laser Doppler vibrometer, enabling us to resolve a crack into a collection of scattring sources. Subsequently, we show how the 3D elastic-wave scattering in the vicinity of each response can be extracted. Here, we experimentally applied PLUS to a fatigue-crack specimen. We found that diverse 3D elastic-wave scattering occurred in a manner depending on the responses within the fatigue crack. This is significant because access to such information will be useful for optimizing inspection conditions, designing ultrasonic measurement systems, and characterizing cracks. More importantly, the described methodology is very general and can be applied to not only metals but also other materials such as composites, concrete, and rocks, leading to progress in many fields.

36 MATERIALS SCIENCE↗

Dynamic acousto-elastic response of single fatigue cracks with different microstructural features: An experimental investigation

Nonlinearity of damaged materials is often assumed to be correlated with the cumulative length of micro-cracks discounting the influence of crack width and roughness. Here, to investigate the influence of microstructural features of realistic cracks on the nonlinear elastic properties, Dynamic Acousto-Elastic Testing (DAET) is performed on two aluminum alloy samples (30 × 40 × 170 mm 3 ) with a single fatigue-crack. The cracks on the two samples are of similar length but have dissimilar microstructural features due to the different stress intensity factors used during the fatigue tests. DAET is carried out with a surface wave probe to measure the near-surface nonlinearity at a number of locations along each crack. The geometric features of the cracks, including crack width and roughness, are extracted from a series of scanning electron microscope images. DAET results demonstrate that nonlinearity varies along the crack; both samples exhibit greater nonlinearity near the notch, where the crack is wider than near the crack tip. However, the nonlinearity parameters obtained from the sample with a smoother crack are one order of magnitude larger than those of the sample with a relatively rough crack. In addition, the nonlinearity signatures of the two cracks exhibit very different tension/compression asymmetry. Lastly, this study provides valuable data that not only directly correlates the nonlinear ultrasonic signatures and crack interface features but also illuminates the micro-mechanisms and origins of the measured nonlinearities.

36 MATERIALS SCIENCE↗

Technical Report on the Status of Nonlinear Ultrasonic Techniques for Non-Destructive Inspection

This report summarizes technical work conducted by LANL staff and international collaborators in support of the UFD Storage Experimentation effort. The overall focus of this technical work is two-fold: a) on the detection and imaging of a failure mechanism known as stress corrosion cracking (SCC) in stainless steel, and b) on evaluating concrete degradation using nonlinear ultrasonic techniques. This year we report here on three research efforts: 1) experimental effort utilizing TREND and SPACE inspection techniques for crack detection in stainless steel; 2) numerical modeling of 3D time reversal focusing to quantify TREND inspection regions; and 3) application of nonlinear ultrasonic techniques for quantifying concrete degradation. The first and third were collaborative efforts. The first was performed in conjunction with the Tohoku University (Sendai, Japan) and CNRS Parametric Imaging Laboratory (Laboratoire d’Imagerie Parametrique, in Paris, France), with support from the Electricity of France (Électricité de France, [EDF], in Paris, France) project. The third research effort was performed in conjunction with the Federal Institute for Material Research and Testing (Bundesanstalt für Materialforschung und –prüfung, in Berlin, Germany) and The Pennsylvania State University (State College, PA). The conclusion to be made from these results is that nonlinear ultrasound is applicable as a spot inspection technique in both stainless steel and concrete, with the potential to be more broadly applied to other materials and environments. The nonlinear signature measured is related to the degree of damage/degradation. The localized nature of the measurement allows for identification of mechanical defects and localization of degraded regions. Further work is necessary to characterize the degradation (e.g., sensitivity, size of flaws, type of damage, residual strength, etc.). Additionally, for the SCC work to continue to progress, relevant samples must be acquired for study.

36 MATERIALS SCIENCE↗

Experimental Investigations -- Midyear Status Report

This report summarizes technical work conducted by LANL staff and international collaborators in support of the UFD Storage Experimentation effort. The current focus of this technical work is two-fold: 1) on the stainless steel (304L) failure mechanism known as stress corrosion cracking (SCC), and 2) on the concrete integrity under degradation conditions (e.g., thermal, radiation, alkali-aggregate reactions). As these issues are common among our international partners, a significant effort has been put forth to engage foreign programs in a mutually beneficial collaborative program on these topics. Results from these collaborations, notably with Japan, France and Switzerland, are highlighted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗