Search NASA⌕ Search

Engineering topics

Oldenburg, CurtisM

Publications and source records attributed to Oldenburg, CurtisM.

T2Well-ECO2NV2 v1.0 beta

T2Well-ECO2NV2 combines the T2Well code for simulating coupled well-reservoir fluid and heat flow with the ECO2N Version 2.0 equation of state module for calculating the fluid properties of water-CO2-salt mixtures at high temperatures. The combination of these two capabilities in T2Well-ECO2NV2 creates the capability of simulating injection and withdrawal of fluids in high-Temperature geothermal or geologic carbon sequestration systems. While the previously released T2Well-ECO2N Version 1.0 was useful for geologic carbon sequestration, the new T2Well-ECO2NV2 has capabilities for higher temperature and thereby allows the simulation of CO2-rich geothermal systems.

Oldenburg, CurtisM↗

T2DM v1.0

T2DM adds two-dimensional hydrodynamic dispersion to TOUGH2/EOS7C. T2DM can be used when modeling flow and transport of brine in porous media to account for hydrodynamic dispersion.

Oldenburg, CurtisM↗

TOGA: A TOUGH code for modeling three-phase, multi-component, and non-isothermal processes involved in CO2-based Enhanced Oil Recovery (TOGA) v1.0

TOGA (TOUGH Oil, Gas, Aqueous) is a numerical reservoir simulator for modeling non-isothermal flow and transport of water, CO2, multicomponent oil, and related gas components for applications including CO2-enhanced oil recovery (CO2-EOR) and geologic carbon sequestration in depleted oil and gas reservoirs. TOGA uses an approach based on the Peng-Robinson equation of state (PR-EOS) to calculate the thermophysical properties of the gas and oil phases including the gas/oil components dissolved in the aqueous phase, and uses a mixing model to estimate the thermophysical properties of the aqueous phase.

Oldenburg, CurtisM↗

EOS7CA Version 1.0: TOUGH2 Module for Gas Migration in Shallow Subsurface Porous Media Systems

EOS7CA is a TOUGH2 module for mixtures of a non-condensible gas (NCG) and air (with or without a gas tracer), an aqueous phase, and water vapor. The user can select the NCG as being CO2, N2, or CH4. EOS7CA uses a cubic equation of state with a multiphase version of Darcy's Law to model flow and transport of gas and aqueous phase mixtures over a range of pressures and temperatures appropriate to shallow subsurface porous media systems. The limitation to shallow systems arises from the use of Henry's Law for gas solubility which is appropriate for low pressures but begins to over-predict solubility starting at pressures greater than approximately 1 MPa (10 bar). The components modeled in EOS7CA are water, brine, NCG, gas tracer, air, and optional heat.

Oldenburg, CurtisM↗

EOS7C-ECBM Version 1.0

EOS7C is an equation of state module for the TOUGH2 program for CO2 or N2 in Methane (CH4) Reservoirs. In the present work, additions have been made to the EOS7C Version 1.0 module to include the Enhanced Coal Bed Methane (ECBM) modifications developed by Webb (2003). In addition, the Dusty Gas Model for gas-phase diffusion (Webb 2001) has been included. The ECBM modification to the EOS7C equation of state incorporate the extended Langmuir isothem for sorbing gases, including the change in porosity associated with the sorbed gas mass. Comparison to hand calculations for pure gas and binary mixture shows very good agreement. Application to a CO2 well injection problem by Law et al. (2002). The Dusty Model modification add options to calculate gas diffusion using the Dusty-Gas Model including separate and coupled approaches. Comparison to low-permeability pure gas diffusion data shows excellent agreement. The results from the DGM are compared to the Fick's Law behavior for diffusion across a capillary fringe. The differences between the models are small due to the relatively high permeability (10-11 m2) of the problem.

Oldenburg, CurtisM↗

TOUGH2 V2.1

TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one-, two-, and three-dimensional porous and fracture media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, geologic carbon sequestration, and unsaturated and saturated zone hydrology. The TOUGH2 V2.1 package is an upgrade of TOUGH2 V2.0 (CR-1574) and includes the following improvements and enhancements relative to TOUGH2 V2.0: - Includes all known bug fixes - The module TMVOC (CR-1820) is fully integrated - The module ECO2N (CR-2202) is fully integrated - A fluid property module ECO2M has been added, that can seamlessly model CO2 storage and leakage scenarios, including transitions between super- and sub-critical fluids, and phase changes between liquid and gaseous CO2. The TOUGH2 V2.1 package also supports all legacy fluid property modules, i.e., those packaged into TOUGH2 V2.0 (CR-1574), which includes T2VOC (CR-1254).

Oldenburg, CurtisM↗