Search NASA⌕ Search

Engineering topics

Oreshkin, V I

Publications and source records attributed to Oreshkin, V I.

Study of the core gaps formed accidentally during wire explosion

During wire explosion, along with striations (a regular structure with alternating lower and higher density bands), low-density regions the characteristic axial size of which differs substantially from that of striations and can reach 1-2 mm are also observed in the discharge channel. Such irregular structures came to be known as 'gaps' (D. B. Sinars et al., Phys. Plasmas 8, 216 (2001)). In the present study, the mechanism of the formation of core gaps during explosions of 25- and 50-{mu}m-diameter copper and nickel wires in air is investigated. It is shown that the specific energy deposited in the gap region substantially exceeds the average specific energy deposited in the wire material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser radiation scattering from the wires and fibers of imploding arrays on the Angara-5-1 facility

A method is developed for measurements of laser radiation scattering by wires and fibers in different types of imploding arrays in the initial stage of plasma production at discharge currents per wire of up to 2 kA for aluminum arrays and up to 8 kA for tungsten arrays. The experiments were carried out on the Angara-5-1 facility at a current density in the wires of 10{sup 8} A/cm{sup 2} and current growth rate of {approx}10{sup 13} A/s. It is found that the indicatrix of laser radiation reflected from the wires (fibers) in cylindrical and conical arrays is modified at currents of 0.1-10 kA per wire (fiber). The experimental data on the reflection and scattering of laser radiation from wires and fibers are compared with the results of numerical simulations of their electric explosion in vacuum. It is proposed that the change in the reflection indicatrix of laser radiation is caused by the onset of thermal instabilities. The typical size of density and temperature inhomogeneities on the wire surface is in a range of 10-20 {mu}m, which probably results in a transition from specular to diffuse reflection of laser radiation. A simultaneous abrupt (over 2-3 ns) reduction in the reflection intensity from several wires of an array indicates a homogeneous distribution of the discharge current over the irradiated wires. This closes the issue of the quality of the contact between the wires and the electrodes. The obtained experimental information is of considerable importance for the development of numerical codes for simulations of the implosion of wire arrays and the refinement of the wire parameters in the initial stage of plasma production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of vacuum arc plasma guns for a metal puff Z-pinch system

The performance of a metal puff Z-pinch system has been studied experimentally. In this type of system, the initial cylindrical shell 4 cm in diameter was produced by ten plasma guns. Each gun initiates a vacuum arc operating between magnesium electrodes. The net current of the guns was 80 kA. The arc-produced plasma shell was compressed by using a 450-kA, 450-ns driver, and as a result, a plasma column 0.3 cm in diameter was formed. The electron temperature of the plasma reached 400 eV at an average ion concentration of 1.85 {center_dot} 10{sup 18} cm{sup -3}. The power of the Mg K-line radiation emitted by the plasma for 15-30 ns was 300 MW/cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-pinch source of subnanosecond soft X-ray pulses based on small-sized low-inductance current generator

For the first time, the regime of a micrometer-size hot spot formation is impemented for an X-pinch in a plasma, which is fed from a current generator based on low-inductance capacitors and rapid current switches. The configurations of X-pinches, which can be used effectively as point sources of soft X-rays with this type of current generator, are determined. A prototype of a small-size radiation source for high-resolution point projection X-ray radiography has been constructed. The main parameters of X-pinch as a radiation source are analyzed and compared with X-pinch parameters in high-voltage setups with shaping lines. An analysis of the data on the operation of X-pinches in generators with different parameters has led to simple relations that can be used to select optimal initial X-pinch parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of the transport properties of metals in the biphase region

Results of experiments on electrical wire explosion are presented and processes of stratum formation and decay are analyzed in this paper. A procedure of calculating the transport coefficients from the rate of stratum damping is described. It is demonstrated that values of the transport coefficients for metals are not an unambiguous function of the material state in the biphase region for characteristic times of approx10{sup -7} s but depend on the process prehistory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Expansion of the plasma corona from a wire exploded in vacuum

An experiment was performed with the aim to determine the expansion velocity of the corona that is formed around a wire exploded in vacuum. The corona expansion velocity was found for Al and W wires as the wire current density was increased to 1x10{sup 8}-1.4x10{sup 8} A/cm{sup 2}. It was estimated by the time at which current started flowing through auxiliary electrodes separated from the wire axis by a certain distance. The measurements were performed with preliminary heated and unheated wires. It has been demonstrated that for unheated wires the expansion velocity of the plasma corona is determined by the expansion velocity of the desorbed gas and approximately equals (7+-0.5)x10{sup 6}, (9+-0.5)x10{sup 6}, and (1.1+-0.6)x10{sup 7} cm/s at a generator charge voltage of 10, 20, and 30 kV, respectively. For preliminary heated tungsten wires the metal vapor expansion velocity was (4.2+-0.5)x10{sup 6}, (7+-0.5)x10{sup 6}, and (9+-0.6)x10{sup 6} cm/s at a charge voltage of 10, 20, and 30 kV, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical explosion of metals in fast-rising megagauss magnetic fields

A criterion for the surface explosion of metal conductors in strong magnetic fields with the magnetic induction rising at rates over 4x10{sup 13} G/s has been obtained for a current skinning mode: the explosion occurs as the magnetic energy density at the metal surface becomes as high as a factor of 1.5-2 of the sublimation energy density for the metal under normal conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the strata formation during the explosion of a wire in vacuum

The formation of strata during fast electrical explosions of aluminum wires at current densities of (1-1.4)x10{sup 8} A/cm{sup 2} has been studied experimentally. To observe the strata, the soft x radiation generated at the hot point of an x-pinch was used. It has been revealed that strata are formed before the voltage collapse, that is, at the stage of heating of the wire metal. Two wire explosion modes were realized: with and without cutoff of the current carried by the exploding wire. Analysis of the experimental results shows that the stratification is most probably due to the thermal instability that develops as a consequence of the increase in metal resistivity with temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal instability during an electrical wire explosion

The development of thermal instabilities during an electrical wire explosion is analyzed in the present work based on the methods of small perturbation theory. For two cases, with and without allowance for motion, the dispersion equations are derived that describe a relationship between the instantaneous buildup increment and the axial wave vector component. It is demonstrated that the thermal instabilities are always formed during electrical explosion, irrespective of the explosion mode. There are three destabilizing factors leading to the development of the thermal instabilities: a temperature rise, an increase in the specific resistance with increasing temperature, and an increase in the specific resistance with decreasing density. The critical value of current density below which the sausage instabilities grow faster than the thermal ones and above which, on the contrary, the thermal instabilities are dominant can be found for each metal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopic research of underwater electrical wire explosion

Results of spectroscopic research in the visible range of light of the radiation generated by underwater electrical wire explosions (UEWE) are presented. A pulsed generator with an output voltage of {approx}110 kV, current of {approx}70 kA, and rise time of {approx}60 ns was used for electrical explosion of Cu wires 0.1 mm in diameter and 50 mm in length. It was shown that UEWE is not governed by the 'polarity' effect, which plays an important role in electrical wire explosions in vacuum. The results of detailed space- and time-resolved spectroscopic measurements show that the radiation spectrum differs significantly of the spectrum expected from the exploding wire. A model is suggested based on the formation of a few {mu}m 'water' plasma layer in the vicinity of the exploding wire plasma which efficiently absorbs the radiation of the exploding wire.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the current-sheath formation during the implosion of multishell gas puffs

Results are presented from experimental studies of the dynamics of large-diameter multishell gas puffs imploded by microsecond megampere current pulses. The experiments were conducted on the GIT-12 generator in the regime of microsecond implosion (t{sub imp} = 1.1-1.2 {mu}s, I{sub 0} = 3.4-3.7 MA). The influence of the load configuration on the dynamics of current losses and gas-puff radiative characteristics was studied. The correlation between the radial compression ratio (the ratio between the initial and final Z-pinch radii) and the magnitude of the current flowing at the plasma periphery was investigated. The experiments show that, in a multishell gas puff, large-scale instabilities insignificantly affect the gas-puff implosion even over microsecond time intervals and that a compact dense pinch with a relatively high average electron temperature (400-600 eV) forms at the Z-pinch axis. The diameter of the plasma column radiating in the K-shell lines of neon is about 3-4 mm, the K-shell radiation yield being 5-11 kJ/cm. In the final stage of implosion, only a small portion of the current flows through the high-temperature central region of the pinch plasma, whereas the major part of the generator current flows through the residual peripheral plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗