Searching for prompt and long-lived dark photons in electroproduced e + e − pairs with the heavy photon search experiment at JLab
Not Available
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Engineering topics
Oriunno, M.
Publications and source records attributed to Oriunno, M..
Feasibility of crystal-assisted collimation in the CERN accelerator complex
Bent silicon crystals mounted on high-accuracy angular actuators were installed in the CERN Super Proton Synchrotron (SPS) and extensively tested to assess the feasibility of crystal-assisted collimation in circular hadron colliders. The adopted layout was exploited and regularly upgraded for about a decade by the UA9 Collaboration. The investigations provided the compelling evidence of a strong reduction of beam losses induced by nuclear inelastic interactions in the aligned crystals in comparison with amorphous orientation. A conceptually similar device, installed in the betatron cleaning insertion of CERN Large Hadron Collider (LHC), was operated through the complete acceleration and storage cycle and demonstrated a large reduction of the background leaking from the collimation region and radiated into the cold sections of the accelerator and the experimental detectors. The implemented layout and the relevant results of the beam tests performed in the SPS and in the LHC with stored proton and ion beams are extensively discussed.
43 PARTICLE ACCELERATORS↗
Characterisation of the dip-bump structure observed in proton–proton elastic scattering at $\sqrt{s}$ = 8 TeV
The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton–proton scattering at √s = 8TeV in the squared four-momentum transfer range 0.2GeV 2 < |t| < 1.9GeV 2 . This interval includes the structure with a diffractive minimum (“dip”) and a secondary maximum (“bump”) that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for √s = 8 TeV yields the positions, |t| dip = (0.521 ± 0.007)GeV 2 and |t| bump = (0.695 ± 0.026)GeV 2 , as well as the cross-section values, dσ/dt| dip = (15.1 ± 2.5)μb/GeV 2 and dσ/dt| bump = (29.7 ± 1.8)μb/GeV 2 , for the dip and the bump, respectively.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Event reconstruction in a liquid xenon Time Projection Chamber with an optically-open field cage
nEXO is a proposed tonne-scale neutrinoless double beta decay (0νββ) experiment using liquid 136 Xe (LXe) in a Time Projection Chamber (TPC) to read out ionization and scintillation signals. Between the field cage and the LXe vessel, a layer of LXe (“skin” LXe) is present, where no ionization signal is collected. Only scintillation photons are detected, owing to the lack of optical barrier around the field cage. Here, in this work, we show that the light originating in the skin LXe region can be used to improve background discrimination by 5% over previous published estimates. This improvement comes from two elements. First, a fraction of the γ-ray background is removed by identifying light from interactions with an energy deposition in the skin LXe. Then, background from 222 Rn dissolved in the skin LXe can be efficiently rejected by tagging the α decay in the 214 Bi- 214 Po chain in the skin LXe.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Measurement of the onset of nucleate boiling in liquid xenon
We report the first precision measurement of the superheat temperature required for bubble nucleation in liquid xenon of Δ T wall,ONB = (16.9±0.5) K and Δ T wall,ONB = (19.2 +0.4 -1.1 ) K at pressures of P = (0.98±0.02) bar and P = (1.32 +0.05 -0.01 ) bar, respectively. Both are measured at a subcooled bulk fluid temperature of ~ 162 K. A dedicated liquid xenon setup is used to measure the temperature at which bubble nucleation first appears on the flat surface of a resistor. The associated average heat flux at the surface of the resistor is determined using fluid dynamics simulations. Future experiments can use these experimental results to determine the likelihood of boiling in liquid xenon and to design effective thermal sinks that prevent bubble nucleation.
47 OTHER INSTRUMENTATION↗
Reflectance of Silicon Photomultipliers at Vacuum Ultraviolet Wavelengths
Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. In this work, we report the angular dependence of the specular reflectance in vacuum of SiPMs manufactured by Fondazionc Bruno Kessler (FBK) and Hamamatsu Photonics K.K. (HPK) over wavelengths ranging from 120 to 280 nm. Refractive index and extinction coefficient of the thin silicon-dioxide film deposited on the surface of the FBK SiPMs are derived from reflectance data of an FBK silicon wafer with the same deposited oxide film as SiPMs. The diffuse reflectance of SiPMs is also measured at 193 nm. We use the VUV spectral dependence of the optical constants to predict the reflectance of the FBK silicon wafer and FBK SiPMs in liquid xenon.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode
Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semitransparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are 1.97 ± 0.04 mm/µs and (-0.69 ± 0.05)%/K for liquid xenon, and 1.42 ± 0.03 mm/µs and (+0.11 ± 0.01)%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of 25.7±4.6 cm2/s and 149±23 cm2/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors.
Njoya, Oumarou↗
Elastic differential cross-section ${\mathrm{d}}\sigma /{\mathrm{d}}t$ at $\sqrt{s}=2.76\hbox {TeV}$ and implications on the existence of a colourless C-odd three-gluon compound state
The proton-proton elastic differential cross section dσ/dt has been measured by the TOTEM experiment at √ s = 2.76 TeV energy with β* = 11 m beam optics. The Roman Pots were inserted to 13 times the transverse beam size from the beam, which allowed to measure the differential cross-section of elastic scattering in a range of the squared four-momentum transfer (|t|) from 0.36 GeV 2 to 0.74 GeV 2 . The differential cross-section can be described with an exponential in the |t|-range between 0.36 and 0.54 GeV 2 , followed by a diffractive minimum (dip) at |t dip | = (0.61 ± 0.03) GeV 2 and a subsequent maximum (bump). The ratio of the dσ/dt at the bump and at the dip is 1.7±0.2. When compared to the proton–antiproton measurement of the D0 experiment at √ s = 1.96 TeV, a significant difference can be observed. Under the condition that the effects due to the energy difference between TOTEM and D0 can be neglected, the result provides evidence for a colourless C-odd three-gluon bound state exchange in the t-channel of the proton-proton and proton–antiproton elastic scattering.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗