Search NASA⌕ Search

Engineering topics

Ou, S.

Publications and source records attributed to Ou, S..

Modeling hydrogen markets: Energy system model development status and decarbonization scenario results

Hydrogen can be used as an energy carrier and chemical feedstock to reduce greenhouse gas emissions, especially in difficult-to-decarbonize markets such as medium- and heavy-duty vehicles, aviation and maritime, iron and steel, and the production of fuels and chemicals. Significant literature has been accumulated on engineering-based assessments of various hydrogen technologies, and real-world projects are validating technology performance at larger scales and for low-carbon supply chains. While energy system models continue to be updated to track this progress, many are currently limited in their representation of hydrogen, and as a group they tend to generate highly variable results under decarbonization constraints. Here, the present work provides insights into the development status and decarbonization scenario results of 15 energy system models participating in study 37 of the Stanford Energy Modeling Forum (EMF37), focusing on the U.S. energy system. The models and scenario results vary widely in multiple respects: hydrogen technology representation, scope and type of hydrogen end-use markets, relative optimism of hydrogen technology input assumptions, and market uptake results reported for 2050 under various decarbonization assumptions. Most models report hydrogen market uptake increasing with decarbonization constraints, though some models report high carbon prices being required to achieve these increases and some find hydrogen does not compete well when assuming optimistic assumptions for all advanced decarbonization technologies. Across various scenarios, hydrogen market success tends to have an inverse relationship to success with direct air capture (DAC) and carbon capture and storage (CCS) technologies. While most model-scenario combinations predict modest hydrogen uptake by 2050 – <10 million metric tons (MMT) – aggregating the top 10 % of market uptake results across sectors suggests an upper range demand potential of 42–223 MMT. The high degree of variability across both modeling methods and market uptake results suggests that increased harmonization of both input assumptions and subsector competition scope would lead to more consistent results across energy system models. The wide variability in results indicates strongly divergent conclusions on the role of hydrogen in a decarbonized energy future.

08 HYDROGEN↗

Heat transfer performance comparisons of five different rectangular channels with parallel angled ribs

This paper systematically presents the results of heat transfer and friction factor data measured in five short rectangular channels with turbulence promoters. The project investigated the combined effects of the channel aspect ratio, rib angle-of-attack, and flow Reynolds number on heat transfer and pressure drop in rectangular channels with two opposite ribbed walls. The channel aspect ratio (width-to-height, W/H, ribs on side W) varied from 1/4 to 1/2, to 1, 2, and 4, while the corresponding rib angles-of-attack alpha were 90 deg, 60 deg, 45 deg, and 30 deg, respectively. The Reynolds number range was 10,000-60,000. The results suggest that the narrow aspect ratio channels (W/H less than 1) give much better heat transfer performance than the wide aspect ratio channels (W/H greater than 1). For the square channel (W/H = 1), the 60 deg/45 deg angled ribs provide the best heat transfer performance. For the narrow aspect ratio channel (W/H = 1/4 or 1/2), the 45 deg/60 deg angled ribs are recommended, while the 30 deg/45 deg angled ribs are better for wide aspect ratio channels (W/H = 4 or 2).

Park, J. S.↗

Augmented heat transfer in rectangular channels of narrow aspect ratios with rib turbulators

The effects of the rib angle-of-attack on the distributions of the local heat transfer coefficient and on the friction factors in short rectangular channels of narrow aspect ratios with a pair of opposite rib-roughened walls are determined for Reynolds numbers from 10,000 to 60,000. The channel width-to-height ratios are 2/4 and 1/4; the corresponding rib angles-of-attack are 90, 60, 45, and 30 deg, respectively. The results indicate that the narrow-aspect-ratio channels give better heat transfer performance than the wide-aspect-ratio channels for a constant pumping power. Semiempirical friction and heat transfer correlations are obtained. The results can be used in the design of turbine cooling channels of narrow aspect ratios.

Han, J. C.↗