Search NASA⌕ Search

Engineering topics

Ovchinnikova, Olga

Publications and source records attributed to Ovchinnikova, Olga.

Image Gradient Decomposition for Parallel and Memory-Efficient Ptychographic Reconstruction

Ptychography is a popular microscopic imaging modality for many scientific discoveries and sets the record for highest image resolution. Unfortunately, the high image resolution for ptychographic reconstruction requires significant amount of memory and computations, forcing many applications to compromise their image resolution in exchange for a smaller memory footprint and a shorter reconstruction time. In this paper, we propose a novel image gradient decomposition method that significantly reduces the memory footprint for ptychographic reconstruction by tessellating image gradients and diffraction measurements into tiles. In addition, we propose a parallel image gradient decomposition method that enables asynchronous point-to-point communications and parallel pipelining with minimal overhead on a large number of GPUs. Our experiments on a Titanate material dataset (PbTiO3) with 16632 probe locations show that our Gradient Decomposition algorithm reduces memory footprint by 51 times. In addition, it achieves time-to-solution within 2.2 minutes by scaling to 4158 GPUs with a super-linear strong scaling efficiency at 364% compared to runtimes at 6 GPUs. This performance is 2.7 times more memory efficient, 9 times more scalable and 86 times faster than the state-of-the-art algorithm.

Wang, Xiao↗

Enabling Autonomous Electron Microscopy for Networked Computation and Steering

Advanced electron microscopy workflows require an ecosystem of microscope instruments and computing systems possibly located at different sites to conduct remotely steered and automated experiments. Current workflow executions involve manual operations for steering and measurement tasks, which are typically performed from control workstations co-located with microscopes; consequently, their operational tempo and effectiveness are limited. We propose an approach based on separate data and control channels for such an ecosystem of Scanning Transmission Electron Microscopes (STEM) and computing systems, for which no general solutions presently exist, unlike the neutron and light source instruments. We demonstrate automated measurement transfers and remote steering of Nion STEM physical instruments over site networks. We propose a Virtual Infrastructure Twin (VIT) of this ecosystem, which is used to develop and test our steering software modules without requiring access to the physical instrument infrastructure. Additionally, we develop a VIT for a multiple laboratory scenario, which illustrates the applicability of this approach to ecosystems connected over wide-area networks, for the development and testing of software modules and their later field deployment.

Al Najjar, Anees↗

Ferroic Halide Perovskite Optoelectronics

Metal halide perovskites (MHPs) as one of the most active materials gained tremendous attention in the past decade because of their outstanding performance in optoelectronics. Owing to their perovskite structure, ferroelectricity is anticipated in this class of materials. However, whether MHPs are ferroelectric or not remains elusive. Recently, discussion regarding ferroelasticity in MHPs has been also raised. In addition, ionic motion and structural dynamics are well known in MHPs. Additionally, the interplay of these phenomena including electric polarization, strain, ionic motion, and structural dynamics can have a significant impact on optoelectronics. Therefore, understanding the mechanism behind these phenomena and their interactions is critical in addressing the controversy about ferroicity of MHPs and developing functional devices. Here, the current findings about MHP's ferroicity are summarized and evaluated and a perspective for the future is provided. It is suggested that ionic motion and associated phenomena, coupled with ferroic behavior, are the main drivers behind MHPs functionality. The challenges are also discussed in probing MHPs’ ferroicity and what new measurement modalities are needed to fully understand and characterize MHP behavior. Finally, it is discussed how ferroic and strain can affect the optoelectronic performance of MHPs and how they can be used for engineering of higher performance devices.

36 MATERIALS SCIENCE↗

Helium Ion Microscopy

Nanotechnology research led to the development of various instruments to be used for imaging or fabrication. The helium ion microscope (HIM) became available in 2006 but quickly gained popularity. Its unique gas field ion source enables high-resolution imaging, nanofabrication, direct write, and the recent combination with a secondary ion mass spectrometer offers chemical imaging with ~15 nm resolution. Particularly attractive are the small interaction volume of He and Ne (the two gases offered), small beam spot size, and a moderate sputtering rate. Additionally, the HIM is an excellent imaging tool for insulating samples in soft, polymeric, and biological materials. It can be expected that helium ion microscopy will continue to have a strong influence on broad range of scientific disciplines, including chemistry, materials science, and biology.This chapter aims at providing an overview of the current status of HIM for imaging, analysis, and nanofabrication. It introduces the reader to key components of the instrument, theoretical background, and latest results in the areas of imaging, material fabrication, and chemical analysis capabilities of helium ion microscopy.

Belianinov, Alex↗

Environmental Gating and Galvanic Effects in Single Crystals of Organic–Inorganic Halide Perovskites

Understanding the impact of environmental gaseous on the surface of organometal halide perovskites (OMHPs) couples to the electronic and ionic transport is critically important. Here, we explore the transport behavior and origins of the gas sensitivity in MAPbBr 3 single crystals (SCs) devices using impedance spectroscopy and current relaxation measurements. Strong resistive response occurs when crystals are exposed to different environments. It was shown that SC response to the environment is extremely different at the surface as compared to the bulk due to the disorder surface chemistry. The nonlinear transport properties studied using ultrafast Kelvin probe force microscopy (G-KPFM) to unravel spatio-temporal charge dynamics at SC/electrode interface. The relaxation processes observed in pulse relaxation and G-KPFM measurements along with gas sensitivity of crystals suggest the presence of a triple-phase boundary between environment, electrode, and crystal. Results indicate that the environment is a nontrivial component in the operation of OMHP devices which is reminiscent of fuel cell systems. Furthermore, the triple-phase boundary can play a significant role in the transport properties of OMHPs due to the possibility of the redox processes coupled to the concentration of bulk ionic species. Finally, although instrumental for understanding the device characteristics of perovskites, our studies suggest a new opportunity of coupling the redox chemistry of the Br 2 –Br – pair that defines the bulk ionic conductivity of MAPbBr 3 with the redox chemistry of gaseous (or liquid) environment via a suitable electrocatalytic system to enable new class of energy storage devices and gas sensors.

36 MATERIALS SCIENCE↗

Surface Chemistry Controls Anomalous Ferroelectric Behavior in Lithium Niobate

Polarization switching in ferroelectric materials underpins a multitude of applications ranging from nonvolatile memories to data storage to ferroelectric lithography. While traditionally considered to be a functionality of the material only, basic theoretical considerations suggest that switching is expected to be intrinsically linked to changes in the electrochemical state of the surface. Hence, the properties and dynamics of the screening charges can affect or control the switching dynamics. Despite being recognized for over 50 years, analysis of these phenomena remained largely speculative. Here, we explore polarization switching on the prototypical LiNbO 3 surface using the combination of contact mode Kelvin probe force microscopy and chemical imaging by time-of-flight mass-spectrometry and demonstrate pronounced chemical differences between the domains. Here, these studies provide a consistent explanation to the anomalous polarization and surface charge behavior observed in LiNbO 3 and point to new opportunities in chemical control of polarization dynamics in thin films and crystals via control of surface chemistry, complementing traditional routes via bulk doping, and substrate-induced strain and tilt systems.

36 MATERIALS SCIENCE↗

Investigating the Electromechanical Response Mechanism of Ionic Block Copolymers

One of the rapidly developing frontiers in research and engineering applications is focused on the rational design of materials that have targeted functionalities and tunable responses to external stimuli. Such materials stand to revolutionize how structural components are designed for applications including flexible electronics, biomimetic devices, nanofluidics, as well as separation chemistry. A chief obstacle to achieving this capability is the lack of a fundamental understanding of how chemical structure and morphology give rise to macromolecular properties. With this in mind, our research explores how polymer structure, counterion species, and film morphology affects the electromechanical response of materials when exposed to external electric fields. While the actuating behavior of materials such as Nafion have been commonly investigated, the literature lacks a thorough understanding of how the aforementioned factors drive the electrostatic and mechanical stresses that result in material deformation. Our research has investigated how thin film morphology and counterion species affect the electromechanical response of diblock copolymers containing charged imidazolium groups using neutron reflectometry. The sensitivity of neutron reflectometry to scattering length density as well as sub-nanometer changes in thickness make it an ideal tool for investigating polymer and counterion mobility under applied fields. To this end, we have designed a vacuum chamber capable of applying electric fields to thin films during reflectometry measurements. This chamber was used at the liquids reflectometer (BL-4B) at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) to explore the electromechanical response of ionic block copolymers.

Dugger, Jason W.↗

Replacement for Silicon Devices Looms Big With ORNL Discovery

Two-dimensional electronic devices could inch closer to their ultimate promise of low power, high efficiency and mechanical flexibility with a processing technique developed at the Department of Energy’s Oak Ridge National Laboratory.

25 ENERGY STORAGE↗

The Center for Nanophase Materials Sciences

The Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory (ORNL) integrates nanoscale science with neutron science; synthesis science; and theory, modeling, and simulation. Operating as a national user facility, the CNMS supports a multidisciplinary environment for research to understand nanoscale materials and phenomena.

36 MATERIALS SCIENCE↗