P Danehy | Search NASA

NASA NTRS2019

TPSAS-NF1676L-32869-DND

Three unseeded molecular tagging velocimetry (MTV) techniques have been demonstrated in NASA Langley’s 0.3-meter Transonic Cryogenic Tunnel (TCT). High pressure, cryogenic gaseous N2 is used to produce high Reynolds number transonic flow in TCTs, allowing small aircraft and space vehicles to be tested at flight Reynolds numbers. These facilities generally cannot be seeded with particles or toxic gases so unseeded velocimetry methods are needed. Three Laser Electronic Excitation and Tagging (LEET) techniques were tested: Femtosecond LEET (FLEET), Picosecond LEET (PLEET) and Selective Two-photon Absorptive Resonance Femtosecond LEET (STARFLEET). All three techniques were used over a range of pressures (124 to 517 kPa), temperatures (100-300 K) and Mach numbers (0.2-0.8) to measure freestream conditions and were then compared to conditions determined by the facility data system using conventional wall pressures and probes. Measurement precision and accuracy are presented, as are signal intensity and lifetimes which impact measurement uncertainties and are useful for understanding and modelling the various LEET processes.

P Danehy↗

NASA NTRS2015

TPSAS-NF1676L-21180-DND

Ablative materials are used as the Thermal Protection System (TPS) for space vehicles that enter a planetary atmosphere. During the entry phase, the vehicle experiences high rates of aerodynamic heating. These ablative materials, acting as a heat shield, protect the vehicle from the harsh environment and ensure a safe entry. Ablative materials reduce the incoming heat flux through various phenomena such as near-surface oxidation, pyrolysis chemical reaction, vaporization, and other erosive processes, collectively known as ablation. Spallation is one such ablative process, in which solid particles are ejected from the material into the flow field. The many conditions leading to spallation, however, are not well understood and cannot be described accurately by simple phenomenological models. However, the spallation phenomenon might impact the aerodynamic heating rates of re-entry vehicles using ablative heat shields. For example, the solid particles ejected from the surface can modify the near surface chemical processes and flow field. To investigate spallation effects, a code was developed to compute the dynamics of spalled particles. The code uses a finite-rate chemistry model to study the chemical interactions of the particles with the flow field. The spallation code is dynamically coupled to a CFD solver that models the time accurate hypersonic flow field around an ablative sample. An experimental investigation was also performed at the NASA Langley HYMETS facility. HYMETS is a 400 kW arcjet that can simulate hypersonic flight and Earth or Martian entry conditions. Using high speed cameras, an IR camera, NIR and UV-VIS spectrometers, and other diagnostic instruments, test data on various graphite, LI-900, FiberForm, and PICA test samples were obtained, using target heat flux conditions of 100, 200, and 400 W/cm 2 . From the test campaign, measurements of particle velocity, acceleration and trajectory are obtained.

A Martin↗