Search NASA⌕ Search

Engineering topics

Pakhomov, Andrew V

Publications and source records attributed to Pakhomov, Andrew V.

From Shadowgraph to Monochromatic Schlieren: Time-Resolved Imaging of Dim Laser-Induced Phenomena in the Presence of Saturating Plasma Emission

Plasma emission generated during a laser ablation event can saturate an imaging system, washing out valuable information about non-luminous features such as vapor plumes and shock waves. A step-by-step experimental history of development of imaging system from Shadowgraph to Monochromatic Schlieren is presented here as a method of resolving this issue. An ICCD system was used to image ablation events on {mu}s-timescales in combination with a fiber-coupled Nd:YAG laser operating at a primary output of 50 mW at 532 nm wavelength, which was used as the illumination source. A monochromatic band pass filter at 532{+-}10 nm was inserted into the Schlieren system between the focusing lens and the spatial filter, producing a minute shift in the Schlieren focus. With the filter, the saturation effects were eliminated and features such as shock waves and vapor plumes were clearly visible even when plasma was present. Issues with implementation of this system for application to the study of laser propulsion are discussed in detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Propulsion with Liquid Propellants Part I: an Overview

Despite years of research, laser propulsion on liquid propellants has yet to achieve specific impulses greater than tens of seconds. It is well established that liquids, when used as propellants, can provide coupling coefficient (C{sub m}) on the order of 100-1000 dyne/W. However, the specific impulse (I{sub sp}) has proven to be significantly inferior to that for solid propellants. This paper will examine the various laser propulsion schemes based on ablation of liquid propellants and intended primarily for space applications. The principal shortcomings associated with liquid propellants will be outlined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Propulsion with Liquid Propellants Part II: Thin Films

Thin films of a liquid propellant have been studied as a potential way to boost thrust for laser propulsion applications. A TEA CO{sub 2} laser with 300 ns pulse width was operated at up to 20 J pulse energy to produce irradiances at the target on the order of 1-1200 MW/cm{sup 2} to ablate various systems of thin films on Delrin registered substrates. In this study, time-resolved force sensors and ICCD imaging techniques were used to determine how an addition of thin liquid films to solid substrates affects propulsive properties such as momentum coupling coefficient, specific impulse, and internal efficiency. Transparent (hexane) and absorbing (ethanol and water) thin films were formed above Delrin registered substrates for the laser system operating at 10.6 {mu}m. Thickness effects on the hexane-Delrin registered system will be examined. An analysis will be made of the possible routes for force generation, and the general properties, benefits, and shortcomings of liquid thin film structures will be summarized with regard to laser propulsion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Delrin registered for Propulsion with CO{sub 2} Laser: Carbon Doping Effects

Polyoxymethylene (POM) a.k.a. Delrin has been commonly used for propulsion with carbon dioxide (CO{sub 2}) lasers as a solid fuel providing excellent combination of coupling coefficient and specific impulse. In this paper the propulsive characteristics of white and black (carbon-doped) Delrin will be examined and compared. A Transverse Electric discharge in gas at Atmospheric pressure (TEA) CO{sub 2} laser with 300 ns pulse width was operated at up to 20 J pulse energy to produce irradiances on the order of 1-500 MW/cm{sup 2} on Delrin targets. Fourier Transform Infrared (FTIR) spectroscopy, time-resolved force sensors, a ballistic pendulum, and Schlieren imaging techniques were used to determine absorption spectra, coupling coefficient, specific impulse, and internal efficiency of Delrin. An analysis will be made of the possible routes for force generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Binary Solid Propellants for Constant Momentum Missions

A constant momentum mission is achieved when the speed of the vehicle in the inertial frame of reference is equal to the speed of exhaust relative to the vehicle. Due to 100% propulsive efficiency such missions are superior to traditional constant specific impulse missions. A new class of solid binary propellants for constant momentum missions is under development. A typical propellant column is prepared as a solid solution of two components, with composition gradually changing from 100% of a propellant of high coupling coefficient (C{sub m}) to one which has high specific impulse (I{sub sp}). The high coupling component is ablated first, gradually giving way to the high I{sub sp} component, as the vehicle accelerates. This study opens new opportunities for further design of complex propellants for laser propulsion, providing variable C{sub m} and I{sub sp} during missions.

36 MATERIALS SCIENCE↗

A Conceptual Tree of Laser Propulsion

An original attempt to develop a conceptual tree for laser propulsion is offered. The tree provides a systematic view for practically all possible laser propulsion concepts and all inter-conceptual links, based on propellant phases and phase transfers. It also helps to see which fields of laser propulsion have been already thoroughly explored, where the next effort must be applied, and which paths should be taken with proper care or avoided entirely.

36 MATERIALS SCIENCE↗

American Institute of Beamed Energy Propulsion: An Introduction

To date ISBEP remains the main forum addressing the science and engineering of beamed energy propulsion. Hopefully, it will continue to serve BEP community in this capacity for years to come. The need for organization acting beyond ISBEP was discussed since the second symposium. This paper will address the following question: if our community is ready for having its own organization, a BEP institute, what new it should bring comparing to already existing conference. Such organization, an American Institute on Beamed Energy Propulsion (AIBEP) was recently established. The institute is designed as a nonprofit corporation serving the purpose 'to promote the ideas, concepts and benefits of beamed-energy propulsion to research community, industry and society at large'. The goals of the institute, expected outcomes and benefits of the organization and its membership will be discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗