Engineering topics

Pal, S. R.

Publications and source records attributed to Pal, S. R..

4 records

NASA NTRS1994

The Experimental Cloud Lidar Pilot Study (ECLIPS) for cloud-radiation research

The Experimental Cloud Lidar Pilot Study (ECLIPS) was initiated to obtain statistics on cloud-base height, extinction, optical depth, cloud brokenness, and surface fluxes. Two observational phases have taken place, in October-December 1989 and April-July 1991, with intensive 30-day periods being selected within the two time intervals. Data are being archived at NASA Langley Research Center and, once there, are readily available to the international scientific community. This article describes the scale of the study in terms of its international involvement and in the range of data being recorded. Lidar observations of cloud height and backscatter coefficient have been taken from a number of ground-based stations spread around the globe. Solar shortwave and infrared longwave fluxes and infrared beam radiance have been measured at the surface wherever possible. The observations have been tailored to occur around the overpass times of the NOAA weather satellites. This article describes in some detail the various retrieval methods used to obtain results on cloud-base height, extinction coefficient, and infrared emittance, paying particular attention to the uncertainties involved.

Platt, C. M.↗

NASA NTRS1992

Lidar Studies of Clouds at Toronto During the ECLIPS Program

The Experimental Cloud Lidar Pilot Study (ECLIPS) measurement program involves the measurement of cloud optical and physical parameters with vertically pointing ground-based lidars simultaneously with satellites observing the same cloud system from above. Our frequency doubled Nd:YAG lidar transmits about 500 mJ of linearly polarized radiation at each wavelength (532, 1064 nm) with a prf of 20 Hz. An overview of the statistical behavior of cloud physical parameters and optical parameters is presented.

Pal, S. R.↗

NASA NTRS1986

Inversion of 2 wavelength Lidar data for cloud properties

The inversion of the lidar equation to derive quantitative properties of the atmosphere has continued to present considerable difficulty. The results of a study in which Klett's procedure was utilized for the analysis of cloud backscatter measurements made simulataneously at two ruby lidar wavelengths (694nm,347nmm) are presented. With one lidar system a cloud is probed at the two wavelength and the backscatter measured simulataneously by separate receivers. As a result two sigma profiles which should differ only because the wavlength dependence of the scattering. Experimental data presented to demonstrate the effects and the implications of the applications of the inversion method will be discussed.

Pal, S. R.↗

NASA NTRS1986

Determination of cloud microphysical properties by laser backscattering and extinction measurements

The extinction and backscattering of 514 nm laser radiation in polydisperse water droplet clouds was studied in the laboratory. Three cloud size distributions with modal diameters of 0.02, 5.0, and 12.0 microns were investigated. The relationships between the cloud optical parameters (attentuation coefficient, sigma and volume backscattering coefficient, Beta (sub pi)) and the cloud water content, C, were measured for each size distribution. It was found that a linear relationship exists between sigma and C and between beta (sub pi) and C for cloud water content values up to 3gm/cubic m. The linear relationships obtained, however, have slopes which depend on the droplet size distribution. For a given water content both sigma and beta (sub pi) increase as the modal diameter decreases. The measured data are compared with existing theoretical analyses and discussed in terms of thie application to lidar measurements of atmospheric clouds. It is concluded that the empirical information obtained can serve as a basis for quantitative lidar measurements.

Dubinsky, R. N.↗