Search NASA⌕ Search

Engineering topics

Palm, Stephen P.

Publications and source records attributed to Palm, Stephen P..

27 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

The Estimation of Surface Latent Heat Flux Over the Ocean and its Relationship to Marine Atmospheric Boundary Layer (MABL) Structure

A new technique combining active and passive remote sensing instruments for the estimation of surface latent heat flux over the ocean is presented. This synergistic method uses aerosol lidar backscatter data, multi-channel infrared radiometer data and microwave scatterometer data acquired onboard the NASA P-3B research aircraft during an extended field campaign over the Atlantic ocean in support of the Lidar In-space Technology Experiment (LITE) in September of 1994. The 10 meter wind speed derived from the scatterometers and the lidar-radiometer inferred near-surface moisture are used to obtain an estimate of the surface flux of moisture via bulk aerodynamic formulae. The results are compared with the Special Sensor Microwave Imager (SSM/I) daily average latent heat flux and show reasonable agreement with an rms error and bias of about 50 and 25 W per square meters, respectively. In addition, the MABL height, entrainment zone thickness and integrated lidar backscatter intensity are computed from the lidar data and compared with the magnitude of the surface fluxes. The results show that the surface latent heat flux is most strongly correlated with entrainment zone top, bottom and the integrated MABL lidar backscatter, with corresponding correlation coefficients of 0.62, 0.67 and 0.61, respectively.

Palm, Stephen P.↗
NASA NTRS2000

The Atmospheric Channels of GLAS: Near Real-Time Global Lidar Remote Sensing of Clouds and Aerosols from Space

The Geoscience Laser Altimeter System (GLAS) will be placed into orbit in 2001 aboard the Ice, Cloud and Land Elevation Satellite (ICESat). From its nearly polar orbit (94 degree inclination), GLAS will provide continuous global measurements of the vertical distribution of clouds and aerosols while simultaneously providing high accuracy topographic profiling of surface features. During the mission, which is slated to last 3 to 5 years, the data collected by GLAS will be in near-real time to produce level 1 and 2 data products at the NASA GLAS Science Computing Facility (SCF) at Goddard Space Flight Center in Greenbelt, Maryland. The atmospheric products include cloud and aerosol layer heights, planetary boundary layer depth, polar stratospheric clouds and thin cloud and aerosol optical depth. These products will be made available to the science community within days of their creation. The processing algorithms must be robust, adaptive, efficient, and clever enough to run autonomously for the widely varying atmospheric conditions that will be encountered. This paper presents an overview of the GLAS atmospheric data products and briefly discusses the design of the processing algorithms.

Palm, Stephen P.↗
NASA NTRS1999

Pressure Measurements Using an Airborne Differential Absorption Lidar: Analysis of the Systematic Error Sources - Part 1

Remote airborne measurements of the vertical and horizontal structure of the atmospheric pressure field in the lower troposphere are made with an oxygen differential absorption lidar (DIAL). A detailed analysis of this measurement technique is provided which includes corrections for imprecise knowledge of the detector background level, the oxygen absorption fine parameters, and variations in the laser output energy. In addition, we analyze other possible sources of systematic errors including spectral effects related to aerosol and molecular scattering interference by rotational Raman scattering and interference by isotopic oxygen fines.

Flamant, Cyrille N.↗
NASA NTRS1999

The Estimation Surface Latent Heat Flux Over the Ocean and its Relationship to Marine Atmospheric Boundary Layer (MABL) Structure

A new technique combining active and passive remote sensing instruments for the estimation of surface latent heat flux over the ocean is presented. This synergistic method utilizes aerosol lidar backscatter data, multi-channel infrared radiometer data and microwave scatterometer data acquired onboard the NASA P-3B research aircraft during an extended field campaign over the Atlantic ocean in support of the Lidar In-space Technology Experiment (LITE) in September of 1994. The 10 meter wind speed derived from the scatterometers and the lidar-radiometer inferred near-surface moisture are used to obtain an estimate of the surface flux of moisture via bulk aerodynamic formulae. The results are compared with the Special Sensor Microwave Imager (SSM/I) daily average latent heat flux and show reasonable agreement. However, the SSM/I values are biased high by about 30 W/sq m. In addition, the MABL height, entrainment zone thickness and integrated lidar backscatter intensity are computed from the lidar data and compared with the magnitude of the surface fluxes. The results show that the surface latent heat flux is most strongly correlated with entrainment zone top, bottom and the integrated MABL lidar backscatter, with corresponding correlation coefficients of 0.62, 0.67 and 0.61, respectively.

Palm, Stephen P.↗
NASA NTRS1998

The detection of clouds, aerosols and marine atmospheric boundary layer characteristics from simulated GLAS data

Scheduled for launch in 2001 as part of NASA's Earth Observing System (EOS), the Geoscience Laser Altimeter System (GLAS) will provide continuous laser sounding of the earth's atmosphere from space for the first time. From its polar orbit about 600 km above the surface, GLAS will employ a 40 Hz solid state laser operating at 1064 nm to measure topography to an accuracy of 10 cm. Simultaneously, the atmospheric channels (1064 and 532 nm) of GLAS will provide profiles of atmospheric backscatter from 40 km to the ground with 75 meter vertical resolution (Spinhirne and Palm, 1996). These measurements will give scientists an unprecedented global data set on the vertical structure of clouds and aerosols which will greatly aid research efforts aimed at understanding their effects on climate and their role in climate change (Hartman, 1994). To better understand and predict the performance of the GLAS atmospheric channels, a computer model was developed to simulate the type of signal that the instrument would likely produce. The model uses aircraft lidar data and provides realistic simulated GLAS data sets over large areas spanning a wide range of atmospheric conditions. These simulated GLAS datasets are invaluable for designing and testing algorithms for the retrieval of parameters such as cloud and aerosol layer height, optical depth and extinction cross section. This work is currently proceeding and in this paper we will present results of the cloud and aerosol detection algorithm with emphasis on the detection of Marine Atmospheric Boundary Layer (MABL) aerosol. In addition, we use a recently developed technique to ascertain the feasability of estimating MABL moisture and temperature structure from spaceborne systems such as GLAS.

Palm, Stephen P.↗
NASA NTRS1992

On the existence of convectively produced gravity waves

The Boundary Layer Lidar System (BLLS), together with the gustprobe system onboard the NASA Electra has acquired a unique data set which, for the first time, clearly depicts a gravity wave above a convectively driven planetary boundary layer (PBL). In addition, we believe that the data show the development of a trapped gravity wave over a period of about an hour. If this is the case, it would certainly be the first time that such a process has been seen in the atmosphere. We also conclude that the gravity wave, while being initiated by the convection in the PBL, ultimately acts to organize and control scales in the PBL.

Palm, Stephen P.↗
NASA NTRS1991

Cold-air outbreak during GALE - Lidar observations and modeling of boundary layer dynamics

Two cold-air outbreaks were studied during the Genesis of Atlantic Lows Experiment. A lidar system was operated to observe the boundary layer evolution and the development of clouds. On the first day (January 30, 1986) boundary layer rise was less than 50 percent of the value for the second day (March 2, 1986). On the first day only a thin broken cloud cover formed, while on the second day a thick solid cloud deck formed - although the average moisture content was 60 percent of that on the first day. A trajectory slab model was employed to simulate the evolution of the layer over the ocean near the east Atlantic shore. The model allows for vertical gradients in conservative variables under neutrally buoyant conditions. The primary effect of these assumptions, which are based on observed thermodynamic profiles, is to reduce cloudiness to be more in line with observations. Boundary-layer depth was reasonably well predicted as was sensible and latent heat flux.

Boers, Reinout↗
NASA NTRS1988

Genesis of Atlantic Lows Experiment NASA Electra Boundary Layer Flights Data Report

The objective of this research was to obtain high resolution measurements of the height of the Marine Atmospheric Boundary Layer (MABL) during cold air outbreaks using an Airborne Lidar System. The research was coordinated with other investigators participating in the Genesis of Atlantic Lows Experiment (GALE). An objective computerized scheme was developed to obtain the Boundary Layer Height from the Lidar Data. The algorithm was used on each of the four flight days producing a high resolution data set of the MABL height over the GALE experiment area. Plots of the retrieved MABL height as well as tabular data summaries are presented.

Palm, Stephen P.↗