Search NASA⌕ Search

Engineering topics

Pan, Xin

Publications and source records attributed to Pan, Xin.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Room-temperature spin injection across a chiral perovskite/III–V interface

Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of optoelectronic functionality. Current efforts are limited owing to inherent inefficiencies associated with spin injection across semiconductor interfaces. Here we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a standard semiconductor III-V (Al x Ga 1-x ) 0.5 In 0.5 P multiple quantum well light-emitting diode. The spin accumulation in the multiple quantum well is detected through emission of circularly polarized light with a degree of polarization of up to 15 ± 4%. The chiral perovskite/III-V interface was characterized with X-ray photoelectron spectroscopy, cross-sectional scanning Kelvin probe force microscopy and cross-sectional transmission electron microscopy imaging, showing a clean semiconductor/semiconductor interface at which the Fermi level can equilibrate. Finally, these findings demonstrate that chiral perovskite semiconductors can transform well-developed semiconductor platforms into ones that can also control spin.

14 SOLAR ENERGY↗
DOE OSTI2022

Study of Photocarriers Lifetime Distribution in a-Si:H via Magneto-photoconductivity and Magneto-Photoluminescence

In this report the magneto-photoluminescence (MPL) of localized photocarriers and magneto-photoconductivity (MPC) of delocalized photocarriers in amorphous hydrogenated silicon (a-Si:H) films and devices, respectively, are investigated. Both responses are caused by mixing of spin sublevels in the photogenerated electron–hole (e–h) pairs that alters their recombination and dissociation rates. The spin mixing occurs by a combination of hyperfine interaction (HFI) between spin ½ photocarriers and neighboring 29 Si and 1 H nuclei, and the Δg mechanism which originates from a difference in the Landé g-factors of electrons and holes. The existing disorder in a-Si:H films leads to dispersive field response that is described by a unique dispersive parameter α < 1, from which the e–h lifetime distribution, g(τ) is obtained. The mean e–h lifetime is found to be ≈12 ns for the high-energy, relatively delocalized photocarriers generating the photocurrent, as compared to ≈200 ps for the lower energy, trapped e–h pairs which yield photoluminescence. The MPL(B) and MPC(B) responses in a-Si:H subjected to prolonged illumination that causes Staebler–Wronski type degradation, and subsequent annealing are studied. The illumination-induced photocarrier localization that enhances the HFI component is found, which dramatically decreases upon annealing; this method can assess optoelectronic device degradation.

Staebler-Wronski effect↗
DOE OSTI2021

Chiral-induced spin selectivity enables a room-temperature spin light-emitting diode

In traditional optoelectronic approaches, control over spin, charge, and light requires the use of both electrical and magnetic fields. In a spin-polarized light-emitting diode (spin-LED), charges are injected, and circularly polarized light is emitted from spin-polarized carrier pairs. Typically, the injection of carriers occurs with the application of an electric field, whereas spin polarization can be achieved using an applied magnetic field or polarized ferromagnetic contacts. We used chiral-induced spin selectivity (CISS) to produce spin-polarized carriers and demonstrate a spin-LED that operates at room temperature without magnetic fields or ferromagnetic contacts. The CISS layer consists of oriented, self-assembled small chiral molecules within a layered organic-inorganic metal-halide hybrid semiconductor framework. The spin-LED achieves ±2.6% circularly polarized electroluminescence at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Magneto-electroluminescence response in 2D and 3D hybrid organic–inorganic perovskite light emitting diodes

We have studied the magneto-electroluminescence (MEL) response in light emitting diodes based on 2D-(PEA) 2 PbI 4 and 3D-MAPbI 3 hybrid organic–inorganic perovskites at cryogenic temperatures. We found that the MEL is negative, i.e., the EL decreases with the applied field strength, B. In addition, the MEL(B) response has a Lorentzian line shape whose width depends on the perovskite used. We interpret the MEL(B) response using the “Δg mechanism” in which the spin of the injected electron–hole (e–h) pairs oscillates between singlet and triplet configurations due to different precession frequencies of the electron and hole constituents that originate from the difference, Δg, in the electron and hole gyromagnetic constants, g. In this model, the MEL(B) linewidth is inversely proportional to the spin lifetime and Δg. The model used is validated by directly measuring the spin lifetime of photogenerated e–h pairs using the circularly polarized pump–probe transmission technique with 100 fs resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗