Search NASA⌕ Search

Engineering topics

Panisko, Ellen A

Publications and source records attributed to Panisko, Ellen A.

Proteomic and Functional Analysis of the Cellulase System Expressed by Postia placenta during Brown Rot of Solid Wood

Abstract Brown rot basidiomycetes have an important ecological role in lignocellulose recycling and are notable for their rapid degradation of wood polymers via oxidative and hydrolytic mechanisms. However, most of these fungi apparently lack processive (exo-acting) cellulases, such as cellobiohydrolases, which are generally required for efficient cellulolysis. The recent sequencing of the Postia placenta genome now permits a proteomic approach to this longstanding conundrum. We grew P. placenta on solid aspen wood, extracted proteins from the biodegrading substrate, and analyzed tryptic digests by shotgun liquid chromatography-tandem mass spectrometry. Comparison of the data with the predicted P. placenta proteome revealed the presence of 34 likely glycoside hydrolases, but only four of these-two in glycoside hydrolase family 5, one in family 10, and one in family 12-have sequences that suggested possible activity on cellulose. We expressed these enzymes heterologously and determined that they all exhibited endoglucanase activity on phosphoric acid-swollen cellulose. They also slowly hydrolyzed filter paper, a more crystalline substrate, but the soluble/insoluble reducing sugar ratios they produced classify them as nonprocessive. Computer simulations indicated that these enzymes produced soluble/insoluble ratios on reduced phosphoric acid-swollen cellulose that were higher than expected for random hydrolysis, which suggests that they could possess limited exo activity, but they are at best 10-fold less processive than cellobiohydrolases. It appears likely that P. placenta employs a combination of oxidative mechanisms and endo-acting cellulases to degrade cellulose efficiently in the absence of a significant processive component.

Cellulase↗

PNNL Fungal Biotechnology Core DOE-OBP Project

This is the annual report for fiscal year 2011 by PNNL's Fungal Biotechnology research program to the sponsor, DOE's Office of Biomass Program. In FY 2011, PNNL's Fungal Biotechnology Team focused its research on improving its understanding of pentose utilization, carbon flux in fungi, and biosynthesis of hydrocarbon backbone compounds such as polyketides, fatty acids, and terpenes. A major highlight for the team was the publication of the comparative genomic analysis of two Aspergillus niger strains in the journal Genome Research.

Baker, Scott E↗

Proteome Studies of Filamentous Fungi

The continued fast pace of fungal genome sequence generation has enabled proteomic analysis of a wide breadth of organisms that span the breadth of the Kingdom Fungi. There is some phylogenetic bias to the current catalog of fungi with reasonable DNA sequence databases (genomic or EST) that could be analyzed at a global proteomic level. However, the rapid development of next generation sequencing platforms has lowered the cost of genome sequencing such that in the near future, having a genome sequence will no longer be a time or cost bottleneck for downstream proteomic (and transcriptomic) analyses. High throughput, non-gel based proteomics offers a snapshot of proteins present in a given sample at a single point in time. There are a number of different variations on the general method and technologies for identifying peptides in a given sample. We present a method that can serve as a “baseline” for proteomic studies of fungi.

59 BASIC BIOLOGICAL SCIENCES↗

PNNL Fungal Biotechnology Core DOE-OBP Project

In 2009, we continued to address barriers to fungal fermentation in the primary areas of morphology control, genomics, proteomics, fungal hyperproductivity, biomass-to-products via fungal based consolidated bioprocesses, and filamentous fungal ethanol. “Alternative renewable fuels from fungi” was added as a new subtask. Plans were also made to launch a new advanced strain development subtask in FY2010.

09 BIOMASS FUELS↗

Analytical and computational approaches to define the Aspergillus niger secretome

We used computational and mass spectrometric approaches to characterize the Aspergillus niger secretome. The 11,200 gene models predicted in the genome of A. niger strain ATCC 1015 were the data source for the analysis. Depending on the computational methods used, 691 to 881 proteins were predicted to be secreted proteins. We cultured A. niger in six different media and analyzed the extracellular proteins produced using mass spectrometry. A total of 222 proteins were identified, with 39 proteins expressed under all six conditions and 74 proteins expressed under only one condition. The secreted proteins identified by mass spectrometry were used to guide the correction of about 20 gene models. Additional analysis focused on extracellular enzymes of interest for biomass processing. Of the 63 glycoside hydrolases predicted to be capable of hydrolyzing cellulose, hemicellulose or pectin, 94% of the exo-acting enzymes and only 18% of the endo-acting enzymes were experimentally detected.

09 BIOMASS FUELS↗

Differential Expression in Phanerochaete chrysosporium of Membrane-Associated Proteins Relevant to Lignin Degradation

Fungal lignin-degrading systems must include membrane-associated proteins that participate in diverse processes such as uptake and oxidation of lignin fragments, secretion of ligninolytic secondary metabolites, and defense of the mycelium against ligninolytic oxidants. Despite their importance, little is known about the nature or regulation of these membrane-associated components. We grew the white rot basidiomycete Phanerochaete chrysosporium on cellulose or glucose as the carbon source and monitored the mineralization of a 14C-labeled synthetic lignin by these cultures to assess their ligninolytic competence. The results showed that the cellulose-grown cultures were ligninolytic, whereas the glucose-grown ones were not. We isolated microsomal membrane fractions from both types of culture and analyzed tryptic digests of them by shotgun liquid chromatography/tandem mass spectrometry. Comparison of the results against the predicted P. chrysosporium proteome showed that a catalase (Joint Genome Institute P. chrysosporium protein I.D. 124398), an alcohol oxidase (126879), two transporters (137220 and 132234), and two cytochrome P450s (5011 and 8912) were up-regulated under ligninolytic conditions. Real time reverse transcription polymerase chain reaction assays showed that RNA transcripts encoding all of these proteins were also up-regulated in ligninolytic cultures. Catalase 124398, alcohol oxidase 126879, and transporter 137220 were found in a proteomic analysis of partially purified plasma membranes from ligninolytic P. chrysosporium, and are therefore most likely associated with the outer envelope of the fungus.

09 BIOMASS FUELS↗

Evaluation of Sampling Tools for Environmental Sampling of Bacterial Endospores from Porous and Non-porous Surfaces

Aims: Having and executing a well-defined and validated sampling protocol is critical following a purposeful release of a biological agent for response and recovery activities, for clinical and epidemiological analysis and for forensic purposes. The objective of this study was to address the need for validated sampling and analysis methods called out by the General Accounting Office and others to systematically compare the collection efficiency of various swabs and wipes for collection of bacterial endospores from five different surfaces, both porous and non-porous. This study was also designed to test the collection and extraction solutions used for endospore recovery from swabs and wipes. Methods and Results: Eight collection tools were used, five swabs and three wipes. Three collection/preservation solutions were evaluated: sterile E-pure® water, phosphate buffered saline (PBS), and phosphate buffered saline with 0.3% Tween (PBST). An Ink Jet Aerosol Generator (IJAG) was used to apply Bacillus subtilis endospores to five porous and non-porous surfaces. The collection efficiencies of the swabs and wipes were compared using a statistical multiple comparison analysis. Results indicated that wipes tend to have higher collection efficiency than swabs. Of the swabs tested, the recovery from most of the surfaces was highest with the polyurethane foam swab. Conclusions: The ScottPure® wipe had the highest collection efficiency and PBST was the best collection solution of those tested. Significance and Impact of Study: Validated sampling for potential biological warfare is of significant importance and this study answered some relevant questions.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A mixed-effects Statistical Model for Comparative LC-MS Proteomics Studies

Comparing a protein’s concentrations across two or more treatments is the focus of many proteomics studies. A frequent source of measurements for these comparisons is a mass spectrometry (MS) analysis of a protein’s peptide ions separated by liquid chromatography (LC) following its enzymatic digestion. Alas, LC-MS identification and quantification of equimolar peptides can vary significantly due to their unequal digestion, separation and ionization. This unequal measurability of peptides, the largest source of LC-MS nuisance variation, stymies confident comparison of a protein’s concentration across treatments. Our objective is to introduce a mixed-effects statistical model for comparative LC-MS proteomics studies. We describe LC-MS peptide abundance with a linear model featuring pivotal terms that account for unequal peptide LC-MS measurability. We advance fitting this model to an often incomplete LC-MS dataset with REstricted Maximum Likelihood (REML) estimation, producing estimates of model goodness-offit, treatment effects, standard errors, confidence intervals, and protein relative concentrations. We illustrate the model with an experiment featuring a known dilution series of a filamentous ascomycete fungus Trichoderma reesei protein mixture. For the 781 of 1546 T.reesei proteins with sufficient data coverage, the fitted mixed-effects models capably described the LC-MS measurements. The LC-MS measurability terms effectively accounted for this major source of uncertainty. Ninety percent of the relative concentration estimates were within 1/2 fold of the true relative concentrations. Akin to the common ratio method, this model also produced biased estimates, albeit less biased. Bias decreased significantly, both absolutely and relative to the ratio method, as the number of observed peptides per protein increased. Mixed-effects statistical modeling offers a flexible, well-established methodology for comparative proteomics studies integrating common experimental designs with LC-MS sample processing plans. It favorably accounts for the unequal LC-MS measurability of peptides and produces informative quantitative comparisons of a protein’s concentration across treatments with objective measures of uncertainties.

Environmental Molecular Sciences Laboratory↗