Search NASA⌕ Search

Engineering topics

Park, C.

Publications and source records attributed to Park, C..

At least 37 records · Page 2

Microstructural Record of Evolving Condensation Processes in Fine-Grained Ca-Al-Rich Inclusions from the Reduced CV3 Chondrites

Fine-grained, spinel-rich Ca-Al-rich inclusions (FGIs) in carbonaceous chondrites consist of numerous layered nodules having cores of spinel, hibonite, and/or perovskite surrounded by multiple thin layers of melilite, anorthite, diopside, and/or olivine. They are interpreted as aggregates of direct high-temperature condensates from an 16O-rich nebular gas that escaped significant melting. However, FGIs are very complex objects composed of intimate intergrowths of fine-grained refractory phases and show extremely large variations in mineralogy, modal abundance, and textures. Thus, detailed FIB/TEM analyses of FGIs are required to fully characterize their micro-to-nanometer scale textures, mineralogy, and chemical compositions and hence elucidate their formation processes and conditions in the early solar nebula. Here, we present our on-going study of pristine FGIs from the reduced CV3 chondrites Efremovka and Thiel Mountains (TIL) 07003 and 07007 that have minimal evidence for secondary parent body alteration.

Han, J.↗

Tuning magnetic coercivity with external pressure in iron-rhenium based ferrimagnetic double perovskites

We studied the effect of physical pressure on the electronic and magnetic properties of ferrimagnetic double perovskites A 2 FeReO 6 (A = Ca, Ba) using Re L 2,3 edge x-ray absorption spectroscopy and powder diffraction measurements. Volume compression is shown to dramatically increase the magnetic coercivity (H c ) in polycrystalline samples of both compounds with ΔH c /ΔV similar to 150-200 Oe/Å 3 . A nearly eight-fold increase in H c , from 0.2 to 1.55 T, is obtained in Ba 2 FeReO 6 at P = 29 GPa. While no signs of structural phase transitions are seen in either sample to similar to 30 GPa, the structural data points to a pressure-driven increase in tetragonal distortion of ReO 6 octahedra. A sizable but pressure-independent Re orbital-to-spin magnetic moment ratio is observed, pointing to the critical role of spin-orbit interactions at Re sites. We present a J(eff) description of the electronic structure that combines effects of crystal field and spin-orbit coupling on the Re 5d 2 orbitals and use this description to provide insight into the pressure-induced enhancement of magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic Properties across the y→α Volume Collapse in Cerium versus Pressure and Temperature

Here, the longitudinal and transverse sound speeds, c L and c T , of polycrystalline cerium were measured isothermally vs pressure up to the critical temperature across the iso-structural γ-α volume collapse (VC) phase transition. We deduce values for the adiabatic bulk modulus BS, the shear modulus G = ρc T 2 , the Poisson’s ratio ν and the Debye temperature, θ D (p). We find that the elastic constant C 12 is solely responsible for the decrease of B S with pressure towards the VC at RT. With increasing temperature, the lattice contribution ΔS vib (γ→α) to the total entropy change across the VC decreases more rapidly to zero than the total entropy itself suggesting that another mechanism, possibly disorder, assists in stabilizing the γ-phase entropically against the α-phase. Also, with increasing temperature, the Poisson’s ratio becomes negative near the VC transition, meaning that cerium metal takes on auxetic characteristics over a small pressure range. At the critical point the Poisson’s ratio ought to be -1, since the isothermal bulk modulus vanishes and the shear modulus remains nonzero.

36 MATERIALS SCIENCE↗

Interfacial and Hydrodynamic Behavior of Thin Spherical Bubbles of Smectic Liquid Crystal in Microgravity

The Observation and Analysis of Smectic Islands in Space (OASIS) project comprises a series of experiments that probe the interfacial and hydrodynamic behavior of thin spherical bubbles of smectic liquid crystal in microgravity. Smectic films are the thinnest known structures formed of condensed phases, making them ideal for studies of two-dimensional (2D) coarsening dynamics and thermocapillary phenomena. The OASIS flight hardware was launched on SpaceX-6 in April 2015 and experiments were carried out on the International Space Station using four different smectic A and C liquid crystal materials in separate sample chambers. We will describe the behavior of collective island dynamics on the bubbles, including temperature-gradient-induced thermomigration, 2D Rayleigh-Plateau Instability, Oswald ripening dynamics, the single and multiple island diffusion on the curved surface and coalescence-driven coarsening dynamics of island emulsions in microgravity. On Earth, such island emulsions would rapidly sediment to the bottom of the bubble and coalesce, but in microgravity, coarsening of the emulsion can be observed free of gravitational effects.

liquid crystal↗

Forcing Cesium into Higher Oxidation States Using Useful hard x-ray Induced Chemistry under High Pressure

This paper discusses our attempt to synthesize higher oxidation forms of cesium fluoride by pressurizing cesium fluoride in a fluorine-rich environment created via the x-ray decomposition of potassium tetrafluoroborate. This was done in order to confirm recent theoretical predictions of higher oxidation forms of CsFn. We discuss the development of a technique to produce molecular fluorine in situ via useful hard x-ray photochemistry, and the attempt to utilize this technique to form higher oxidation states of cesium fluoride. In order to verify the formation of the novel stoichiometric species of CsFn. X-ray Absorption Near Edge Spectroscopy (XANES) centered on the cesium K-edge was performed to probe the oxidation state of cesium as well as the local molecular coordination around Cs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multistage Monte Carlo simulation of jet modification in a static medium

In this work, the modification of hard jets in an extended static medium held at a fixed temperature is studied using three different Monte Carlo event generators: linear Boltzmann transport (LBT), modular all twist transverse-scattering elastic-drag and radiation (MATTER), and modular algorithm for relativistic treatment of heavy-ion interactions (MARTINI). Each event generator contains a different set of assumptions regarding the energy and virtuality of the partons within a jet versus the energy scale of the medium and, hence, applies to a different epoch in the space-time history of the jet evolution. Here modeling is developed where a jet may sequentially transition from one generator to the next, on a parton-by-parton level, providing a detailed simulation of the space-time evolution of medium modified jets over a much broader dynamic range than has been attempted previously in a single calculation. Comparisons are carried out for different observables sensitive to jet quenching, including the parton fragmentation function and the azimuthal distribution of jet energy around the jet axis. The effect of varying the boundary between different generators is studied and a theoretically motivated criterion for the location of this boundary is proposed. Lastly, the importance of such an approach with coupled generators to the modeling of jet quenching is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pressure-induced phase transitions of β-type pyrochlore CsTaWO 6

The β-type pyrochlore CsTaWO 6 was studied by synchrotron X-ray diffraction (XRD) and Raman scattering methods up to pressures of 43 GPa using a diamond anvil cell (DAC). With increasing pressure, the cubic pyrochlore in space group of Fd-3¯m with combining macron]m transforms to an orthorhombic structure (space group: Pnma) at 5.9 GPa and then to a monoclinic structure (space group: P2 1 /c) at ~18 GPa. The structural evolution in CsTaWO 6 is a continuous process and experimental results suggest that the initial cubic phase has a tetragonal distortion at ambient conditions. Both XRD and Raman measurements indicate that the pressure-induced phase transitions in CsTaWO 6 are reversible. Lastly, these results may provide a structural explanation of previous experimental resistivity measurement results for the isostructural superconductor K(Cs)Os 2 O 6 at high pressure conditions.

36 MATERIALS SCIENCE↗

Viral dynamic modelling of Hepatitis C and resistance-associated variants in haemophiliacs

Aim- We present that chronic hepatitis C virus (HCV) infection is an important source of morbidity and mortality among haemophiliacs. Limited data are available regarding treatment intervention using direct-acting antivirals (DAAs) and theoretical concerns regarding accumulation of drug-associated resistance variants (RAVs) remain. We conducted a pilot study of treatment with telaprevir/pegylated interferon-alfa/ribavirin to evaluate treatment response and the role of lead-in DAA therapy on mutational selection of resistance variants. Methods- Ultra-deep sequence analysis was performed at baseline, 48 hours and 168 hours after treatment initiation. Results- No dominant RAVs were identified at baseline, but low-level RAVs were noted at baseline in all subjects. Viral dynamic models were used to assess treatment responses. The efficacy parameter (ε) for lead-in ranged from 0 to 0.9745 (mean = 0.514). Subsequent addition of telaprevir resulted in a mean efficacy of more than 0.999. This was comparable to subjects who started all three medications simultaneously. A total of 80% achieved SVR. While rapid shifts in the RAV population following DAA initiation were observed, treatment failure associated with A156V was observed in only one patient. Adverse event profiles were similar to that observed in non-haemophilia cohorts. There was no evidence of factor inhibitor formation. There was no evidence that lead-in provided benefit in terms of response efficacy. Conclusion- Finally, these data support DAA-based therapy in those with inherited bleeding disorders.

59 BASIC BIOLOGICAL SCIENCES↗

Thermodynamic Approach to Boron Nitride Nanotube Solubility and Dispersion

Inadequate dispersion of nanomaterials is a critical issue that significantly limits the potential properties of nanocomposites and when overcome, will enable further enhancement of material properties. The most common methods used to improve dispersion include surface functionalization, surfactants, polymer wrapping, and sonication. Although these approaches have proven effective, they often achieve dispersion by altering the surface or structure of the nanomaterial and ultimately, their intrinsic properties. Co-solvents are commonly utilized in the polymer, paint, and art conservation industries to selectively dissolve materials. These co-solvents are utilized based on thermodynamic interaction parameters and are chosen so that the original materials are not affected. The same concept was applied to enhance the dispersion of boron nitride nanotubes (BNNTs) to facilitate the fabrication of BNNT nanocomposites. Of the solvents tested, dimethylacetamide (DMAc) exhibited the most stable, uniform dispersion of BNNTs, followed by N,N-dimethylformamide (DMF), acetone, and N-methyl-2-pyrrolidone (NMP). Utilizing the known Hansen solubility parameters of these solvents in comparison to the BNNT dispersion state, a region of good solubility was proposed. This solubility region was used to identify co-solvent systems that led to improved BNNT dispersion in poor solvents such as toluene, hexane, and ethanol. Incorporating the data from the co-solvent studies further refined the proposed solubility region. From this region, the Hansen solubility parameters for BNNTs are thought to lie at the midpoint of the solubility sphere: 16.8, 10.7, and 9.0 MPa(exp 1/2) for delta d, delta p, and delta h, respectively, with a calculated Hildebrand parameter of 21.8 MPa)exp 1/2).

Tiano, A. L.↗