Search NASA⌕ Search

Engineering topics

Park, Chul

Publications and source records attributed to Park, Chul.

67 records · Page 4

Operating characteristics of a 60 cm and a 10 cm electric arc-driven shock-tube

This paper describes the current status of the operating characteristics of the electric arc-driven shock-tube facility at Ames Research Center, focusing on its potential usefulness in the current and anticipated future applications. The paper specifically addresses the questions as to: (1) how well the behavior of the arc driver is understood and controlled, (2) how well the facility is equipped to test low-density, very-high-velocity nonequilibrium flow regimes, and (3) how closely the facility is expected to produce an equilibrium hypersonic flow when operated in shock-tunnel modes. For these issues, it is shown that: (1) a plasma kinetics model of the exploding wire closely describes the arc behavior in the driver, (2) the facility can produce a spectroscopically-clean flow in a low density regime with a shock velocity of 13 km/sec in air when used with an aluminum driven tube, and (3) when operated as a shock-tunnel, the high enthalpy flow in the test section is expected to deviate only slightly from the perfect equilibrium flow conditions at enthalpies corresponding to flight speeds of 5 km/sec or less.

Sharma, Surendra P.↗

Two-temperature interpretation of dissociation rate data for N2 and O2

The existing experimental data on dissociation of nitrogen and oxygen obtained using shock-tubes during the 1960's and 1970's are reinterpreted using the two-temperature thermo-chemical model developed recently in order to determine the rate coefficients consistent with the model. In this model, the vibrational-electronic temperature is calculated by integrating a separate conservation equation accounting for the suppression of vibrational energy during dissociation due to preferential removal of high vibrational states. The rate coefficient is assumed to be a function of the geometrically-averaged temperature between the translational-rotational temperature and the vibrational-electronic temperature. By comparing the computed overall and species densities with the experimental data, the rate coefficient values most consistent with the model, and their ranges of uncertainty, are deduced for dissociation of N2 through collisions with N2 or N, and for O2 through collisions with O2, O or N2. It is seen that a single set of such rate coefficients fit all existing experimental data closely. According to the two-temperature model, density and species density are insensitive to the rate coefficients, and so the rate coefficients so determined are uncertain to within a factor of at least 1.5.

Park, Chul↗

Assessment of two-temperature kinetic model for ionizing air

A two-temperature chemical-kinetic model for air is assessed by comparing theoretical results with existing experimental data obtained in shock-tubes, ballistic ranges, and flight experiments. In the model, named the TTv model, one temperature (T) is assumed to characterize the heavy-particle translational and molecular rotational energies, and another temperature (Tv) to characterize the molecular vibrational, electron translational, and electronic excitation energies. The theoretical results for nonequilibrium air flow in shock tubes are obtained using the computer code STRAP (Shock-Tube Radiation Program), and for flow along the stagnation streamline in the shock layer over spherical bodies using the newly developed code STRAP (Stagnation-Point Radiation Program). Substantial agreement is shown between the theoretical and experimental results for relaxation times and radiative heat fluxes. At very high temperatures the spectral calculations need further improvement. The present agreement provides strong evidence that the two-temperature model characterizes principal features of nonequilibrium air flow. New theoretical results using the model are presented for the radiative heat fluxes at the stagnation point of a 6-m-radius sphere, representing an aeroassisted orbital transfer vehicle, over a range of free-stream conditions. Assumptions, approximations, and limitations of the model are discussed.

Park, Chul↗

A survey of aerobraking orbital transfer vehicle design concepts

The five existing design concepts of the aerobraking orbital transfer vehicle (namely, the raked sphere-cone designs, conical lifting-brake, raked elliptic-cone, lifting-body, and ballute) are reviewed and critiqued. Historical backgrounds, and the geometrical, aerothermal, and operational features of these designs are reviewed first. Then, the technological requirements for the vehicle (namely, navigation, aerodynamic stability and control, afterbody flow impingement, nonequilibrium radiation, convective heat-transfer rates, mission abort and multiple atmospheric passes, transportation and construction, and the payload-to-vehicle weight requirements) are delineated by summarizing the recent advancements made on these issues. Each of the five designs are critiqued and rated on these issues. The highest and the lowest ratings are given to the raked sphere-cone and the ballute design, respectively.

Park, Chul↗

A survey of simulation and diagnostic techniques for hypersonic nonequilibrium flows

The possible means of simulating nonequilibrium reacting flows in hypersonic environments, and the required diagnostic techniques, are surveyed in two categories: bulk flow behavior and determination of chemical rate parameters. Flow visualization of shock shapes for validation of computational-fluid dynamic calculations is proposed. The facilities and the operating conditions necessary to produce the required nonequilibrium conditions, the suitable optical techniques, and their sensitivity requirements, are surveyed. Shock-tubes, shock-tunnels, and ballistic ranges in a wide range of sizes and strengths are found to be useful for this purpose, but severe sensitivity requirements are indicated for the optical instruments, which can be met only by using highly-collimated laser sources. Likewise, for the determination of chemical parameters, this paper summarizes the quantities that need to be determined, required facilities and their operating conditions, and the suitable diagnostic techniques and their performance requirements. Shock tubes of various strengths are found to be useful for this purpose. Vacuum ultraviolet absorption and fluorescence spectroscopy and coherent anti-Stokes Raman spectroscopy are found to be the techniques best suited for the measurements of the chemical data.

Sharma, Surendra P.↗

Radiative Viscous Shock Layer Analysis of Fire, Apollo, and PAET Flight Data

Equilibrium, radiating viscous shock layer solutions are obtained for a number of trajectory points of the Fire II, Apollo 4, and PAET experimental flight vehicles. Convective heating rates calculated by a benchmark code agree well with two engineering correlations, except at high altitudes corresponding to low densities. Calculated radiation intensities are compared with the flight radiometer data and with inviscid flow results. Differences as great as 70% are observed between measured data and the viscous calculations. Because of boundary-layer absorption, viscous effects reduce the intensity to the wall by as much as 30% compared with inviscid intensities. Preliminary chemical and thermal nonequilibrium flow calculations along a stagnation streamline for a PAET trajectory predict an enhancement to the radiation owing to the chemical relaxation. Stagnation point solutions are also presented for future aeroassisted orbital transfer vehicle geometries with nose radii of 0.3-15 m.

Balakrishnan, A.↗

Design and Performance Analysis of a Conical Aerobrake Orbital Transfer Vehicle Concept

A Shuttle-compatible systems design based on the core concept of attachable modules for the major vehicle components is proposed. The principal features include a disposable cargo/extra-propellant tank module; a porous, radiative, back-scattering drag-brake surface material of thin silica cloth; and a lightweight carbon-composite support structure. The mission payload capability for delivery, retrieval, and combined operations is determined for a broad range of missions including NASA/DOD requirements and extending through cislunar space. The effects of finite-rate surface catalysis, negative lift, and multiple atmospheric passes in reducing the aerothermodynamic heating rates are also investigated. In addition, the structural and thermal protection problems of the drag-brake support apparatus are analyzed, and recommendations are proposed for future design refinements.

Menees, Gene P.↗

Calculation of Nonequilibrium Radiation in the Flight Regimes of Aeroassisted Orbital Transfer Vehicles

A computer code has been developed that calculates radiative properties of nonequilibrium air in the low-density regimes expected during the flight of aeroassisted, orbital transfer vehicles. From the given nonequilibrium thermodynamic state variables, the code calculates number densities of internal states and the accompanying emission and absorption characteristics. In addition, the code calculates the number density of the hypothetical gas in radiative equilibrium that produces the same radiation emission as the given nonequilibrium gas. Sample results are shown to demonstrate how the code predicts the non-linear variation of radiation with density at low densities.

Park, Chul↗

Problems of Rate Chemistry in the Flight Regimes of Aeroassisted Orbital Transfer Vehicles

The dissociating and ionizing nonequilibrium flows behind a normal shock wave are calculated for the density and vehicle regimes appropriate for aeroassisted orbital transfer vehicles; the departure of vibrational and electron temperatures from the gas temperature as well as viscous transport phenomena are accounted for. From the thermodynamic properties so determined, radiative power emission is calculated using an existing code. The resulting radiation characteristics are compared with the available experimental data. Chemical parameters are varied to Investigate their effect on the radiation characteristics. It is concluded that the current knowledge of rate chemistry leads to a factor-of-4 uncertainty In nonequilibrium radiation intensities. The chemical parameters that must be studied to Improve the accuracy are identified.

Park, Chul↗

Experimental Studies of Radiative Base Heating of a Jovian Entry Model

To verify the validity of the theoretical predictions of Park on radiative base heating rates, two types of models are tested in the absence of ablation in shock tube flows which simulate the Jovian entry environments. The radiative fluxes are measured by pyroelectric radiometers imbedded in the models in a stream consisting of 10% hydrogen in a bath of either neon or argon. In addition, time-resolved photographs are taken to obtain information on the structure of base flows needed in Park's theory. The experimental data show that the radiative base heat fluxes are significant fractions of the radiative fluxes at the front stagnation point, the ratio being dependent upon Mach number and the configuration of the models. When the effects of the model geometry and Mach number are accounted for, the present experimental results agree with the theoretical predictions of Park.

Shirai, Hiroyuki↗

Modeling of Radiative Heating in Base Region of Jovian Entry Probe

A theoretical model is derived to determine the average thermodynamic properties in the expanding region, recirculating region, recompression region, and neck region through application of one-dimensional conservation equations. Radiative transfer is calculated using spectrally detailed computer codes accounting for nonequilibrium. The results show that the most severe heating occurs immediately behind the frustum, and that the recompression and neck regions are the major sources of radiation that heats the base stagnation point, The radiation flux to the base point is slightly stronger with ablation than without. Its value is 0.11(43 P(sub b)/P(sub s))(sup 2) times that to the front stagnation point where the base pressure P(sub b) is defined as the average pressure in the recirculating region and P(sub s) is the front stagnation-point pressure. The time-integrated heat load to the base point is 18(43 P(sub b)/P(sub s))(sup 2) kJ/sq cm.

Park, Chul↗

Nitric Oxide Formation by Meteoroids in the Upper Atmosphere

The process of nitric oxide formation during atmospheric entry of meteoroids is analyzed theoretically. An ablating meteoroid is assumed to be a point source in a uniform flow with a continuum regime evolving in its wake. The amount of nitric oxide produced by high-temperature reactions of air in the continuum regime is calculated by numerical integration of chemical-rate equations. This is accomplished by assuming that flow properties are constant across the reacting region, the radius of the region being determined from considerations of shock-wave formation and molecular diffusion. The results, when summed over the observed mass, velocity, and entry-angle distributions of meteoroids, provide annual global production rates of nitric oxide as a function of altitude. The peak production of nitric oxide is found to occur at altitudes between 9 x 10(exp 4) and 10(exp 5) m, the total annual rate being about 4 x 10(exp 7) kg. The present results suggest that the large concentration of nitric oxide observed below 9.5 x 10(exp 4) m could be attributed to meteoroids instead of photodissociation of nitrogen into metastable, 2D-state atoms, as has been previously hypothesized.

Menees, Gene P.↗