Search NASA⌕ Search

Engineering topics

Park, J.-K.

Publications and source records attributed to Park, J.-K..

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Role of edge-localized neoclassical tearing modes in quiescent H-mode plasmas in the DIII-D tokamak

The edge-harmonic oscillations (EHOs) in standard quiescent H-mode (QH-mode) plasmas in DIII-D are consistent with edge-localized neoclassical tearing modes (NTMs) based on nonlinear two-fluid MHD simulations. Using kinetic equilibria constrained by edge profile measurements, the MHD simulations show that the n = 1 NTM and its harmonics can be destabilized at the pedestal top of QH-mode plasma by the edge bootstrap current. The simulations further show that the unstable NTMs can saturate either at small (<2% ψ N ) or large (>4% ψ N ) island width depending on the magnitude of the edge bootstrap current, where ψ N is the normalized radius in poloidal flux. The onset of the EHO also results in a prompt decrease in the pedestal width and height, consistent with simulation results for the onset of the NTM at the top of the QH-mode pedestal. This suggests that the avoidance of edge-localized modes (ELMs) in QH-mode can be attributed to the enhanced local transport induced by the NTM that is sufficient to prevent the expansion of the pedestal to an unstable width, analogous to the mechanism explored for ELM suppression by resonant magnetic perturbations. Nonlinear MHD simulations scanning the E × B frequency and the ratio of parallel and perpendicular thermal diffusivity (χ | /χ ⊥ ) at the pedestal top show that edge-localized NTMs are destabilized for conditions of high E × B frequency, high pedestal temperature, and low pedestal density, qualitatively consistent with experimental conditions required for observing the EHO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Localizing resonant magnetic perturbations for edge localized mode control in KSTAR

An external 3D magnetic perturbation typically drives a resonant response at the rational surfaces from the core to the edge of tokamak plasmas, due to strong mode coupling and amplification. In this paper, we present a method to isolate the edge from core resonant fields using the ideal perturbed equilibrium code and to design an edge-localized resonant magnetic perturbation (RMP) for effective edge localized mode (ELM) control. A robust feature of the edge-localized RMP is the curtailed response to the field at the low-field-side (LFS) midplane, as opposed to typical RMPs which strongly resonate with the LFS fields. This emphasizes the importance of off-midplane coils to improve ELM control without provoking a large core response that could lead to devastating instabilities. The conceptual design of new ELM control coils based on the edge-localized RMP in KSTAR shows how this new insight can be utilized to enhance the efficiency of our ELM suppression capabilities. Simple window-pane coils matching the edge-localized resonant mode structure substantially expand in the ELM suppression window beyond the existing coil. Further optimization using the flexible optimized coils using space-curves code leads to additional enhancement in the edge-localized control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Analysis of MHD stability and active mode control on KSTAR for high confinement, disruption-free plasma

Long-pulse plasma operation at high normalized beta, $β_N$, above the $\textit{n}$= 1 ideal MHD no-wall stability limit in KSTAR is presently limited by tearing instabilities rather than resistive wall modes. H-mode plasma operation during the recent KSTAR device campaign produced discharges having strong $\textit{m/n}$= 2/1 tearing instabilities at $β_N$ lower than the ideal MHD no-wall beta limit. The unstable tearing mode consequently reduced plasma confinement and toroidal plasma rotation significantly. We report the experiment confirmed that an extended duration of electron cyclotron heating (ECH) at the initial phase of the discharge plays a critical role in mode destabilization. To study destabilizing mechanisms that affect the mode growth, the stability of the observed tearing modes from plasmas with significantly different $β_N$ is computed by using the resistive DCON code and the M3D-C 1 code. Equilibrium reconstructions that include constraints from internal profile diagnostics, and computed fast particle pressure are used as input for reliable computation of stability. The classical tearing stability index, Δ', from resistive DCON is computed to be unstable when the island is fully saturated with large amplitude, while the unstable mode is not computed by M3D-C 1 . The modified Rutherford equation (MRE) describing the evolution of the island width has been constructed for KSTAR plasmas by using plasma parameters computed by the TRANSP code. The MRE model estimates a saturated island width corresponding to ~10% of the plasma minor radius for equilibrium at high $β_N$ 3 having a stable Δ' from the resistive DCON. In preparation for long-pulse plasma operation at higher beta utilizing increased plasma heating power, a resistive wall mode (RWM) active feedback control algorithm has been completed and enabled on KSTAR. To accurately determine the $\textit{n}$= 1component produced by RWMs, an algorithm has been developed that includes magnetic sensor compensation of the prompt applied field and the field from the induced current on the passive conductors. Use of multiple toroidal sensor arrays is enabled by modifying the sensor toroidal angles assumed in mode decomposition to include the effect of varied mode helicities in the outboard region where the mode measurement is made. This analysis on stability, transport, and control provides the required foundation for disruption prediction and avoidance research on KSTAR.

resistive wall mode (RWM)↗