Search NASA⌕ Search

Engineering topics

Park, S. H.

Publications and source records attributed to Park, S. H..

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Wall conditioning and ELM mitigation with boron nitride powder injection in KSTAR

Results from KSTAR powder injection experiments, in which tens of milligrams of boron nitride (BN) were dropped into low-power H-mode plasmas, show an improvement in wall conditions in subsequent discharges and, in some cases, a reduction or elimination of edge-localized modes (ELMs). Injected powder is distributed by the plasma flow and is deposited on the wall and, over the course of several discharges, was observed to gradually reduce recycling by 33%, and decrease both the ELM amplitude and frequency. This is the first demonstration of the use of BN for ELM mitigation. In all of these experiments, an Impurity Powder Dropper (IPD) was used to introduce precise, controllable amounts of the materials into ELMy H-mode KSTAR discharges. The plasma duration was between 10 s and 15 s, I p = 500 kA, B T = 1 . 8 T, P NBI = 1 . 6 MW, and P ECH = 0 . 6 MW. Plasma densities were between 2 and 3 × 1 0 19 m -3 . In all cases, the pre-fill and startup gas-fueling was kept constant, suggesting that the decrease in baseline D α emission is in fact due to a reduction in recycling. The results presented herein highlight the viability of powder injection for intra-shot and between-shot wall conditioning

36 MATERIALS SCIENCE↗
DOE OSTI2019

Controlled neoclassical tearing mode (NTM) healing by fueling pellets and its impact on electron cyclotron current drive requirements for complete NTM stabilization

Controlled partial stabilization of core m/n – 2/1 Neoclassical Tearing Modes (NTMs) by fueling deuterium pellets is reported in DIII-D and KSTAR H-mode plasmas (m=n are the poloidal/toroidal mode numbers). Analyses of DIII-D data exploring possible physics origins show that an explanation is offered by NTM-turbulence multi-scale interaction, triggered by a sudden increase of local gradients near q–2 caused by the pellet. Pellet injection from the high-field side allows deep fueling which reaches the island region. In turn, low-k turbulent density fluctuations (ñ) increase by 30% in the island region. This ñ can drive transport across the island separatrices, reducing the pressure at spot at the O-point and diminishing the NTM drive. The Mirnov probe array detects the reduction of the 2/1 magnetic amplitude by up to 20%. Causality between elevated gradients outside of the island, turbulence spreading into the island and reduced NTM drive is qualitatively supported by non-linear gyrokinetic turbulence simulations. These demonstrate increased penetration of ion-scale ñ from the background plasma to the O-point region when the background gradient is increased. This interaction has potentially far reaching consequences as it can can lead to a reduction of the required electron cyclotron current density (j ECCD ) for NTM suppression by 70%, as predicted by the modified Rutherford equation. Furthermore, this beneicial effect of fueling pellets can be important as j ECCD is the anticipated active NTM control technique for the International Thermonuclear Experimental Reactor (ITER), but its efficiency will be lowered by third harmonic absorption in Pre-Fusion Power Operation-1 (PFPO-1) at half magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Oxidation induced amorphous stabilization of the subsurface region in Zr-Cu metallic glass

In the present study, we demonstrate that selective surface oxidation of Zr{sub 70}Cu{sub 30} metallic glass can stabilize the amorphous structure in the subsurface region of the matrix. The oxidation proceeds by selective oxidation of Zr, forming monoclinic ZrO{sub 2} layer on the surface, and the subsurface layer becomes Cu-enriched due to back diffusion of Cu atoms from the oxide layer. Interestingly, in this system, the composition change in the subsurface region leads to enhancement of glass stability, forming of a double layered surface structure consisted of inner amorphous layer and outer monoclinic ZrO{sub 2} layer even when the remaining matrix is completely crystallized.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

3S (Safeguards, Security, Safety) based pyroprocessing facility safety evaluation plan

The big advantage of pyroprocessing for the management of spent fuels against the conventional reprocessing technologies lies in its proliferation resistance since the pure plutonium cannot be separated from the spent fuel. The extracted materials can be directly used as metal fuel in a fast reactor, and pyroprocessing reduces drastically the volume and heat load of the spent fuel. KAERI has implemented the SBD (Safeguards-By-Design) concept in nuclear fuel cycle facilities. The goal of SBD is to integrate international safeguards into the entire facility design process since the very beginning of the design phase. This paper presents a safety evaluation plan using a conceptual design of a reference pyroprocessing facility, in which 3S (Safeguards, Security, Safety)-By-Design (3SBD) concept is integrated from early conceptual design phase. The purpose of this paper is to establish an advanced pyroprocessing hot cell facility design concept based on 3SBD for the successful realization of pyroprocessing technology with enhanced safety and proliferation resistance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗