Search NASA⌕ Search

Engineering topics

Parker, L. W.

Publications and source records attributed to Parker, L. W..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A precursor to the Venus bow shock

This paper describes the observations by the Pioneer-Venus-Orbiter Langmuir probe of the low-density Venus bow shock precursor, i.e., a region of electron and ion-current enhancements just upstream from the Venus bow shock. It is suggested that the precursor signatures represent the effects of a small population of energetic ions in this region. Several possible planetary sources of these ions are considered. The paper also discusses the Langmuir probe measurement technique itself as it applies to the very low densities of the precursor.

Brace, L. H.↗
NASA NTRS1986

Spacecraft charging in the auroral plasma: Progress toward understanding the physical effects involved

The work is presented in four parts. First, main differences between the plasma environments in geostationary orbit and low polar orbit with regard to high-voltage charging situations are reviewed. Next, results are presented from a calculation of secondary-electron escape currents from negatively-charged spacecraft surfaces having various orientations relative to the local magnetic-field direction. It is shown that for finite ranges of combinations of electric and magnetic field directions, secondary-electron escape is completely suppressed and therefore cannot help to discharge the spacecraft. In such circumstances, secondary electrons may travel distances many times their gyroradii before reimpacting, and this may produce greatly increased secondary-electron surface currents. Thirdly, a simple rough estimate of the required conditions for high-voltage auroral-zone charging is developed. The results suggest that for any given spacecraft, surface potentials are likely to depend more strongly on the ratio of ambient flux of high-energy electrons to that of all ions, than on any other environmental parameter. Finally, preliminary results are presented of numerical simulation work directed toward testing this hypothesis. Numerical instabilities encountered in doing this simulation work probably are closely related to physical sensitivities inherent in the physics of the ion wake behind the spacecraft, and especially to beam-like constituents of the ion population in the wake.

Laframboise, J. G.↗
NASA NTRS1985

Wakes and differential charging of large bodies in low Earth orbit

Highlights of earlier results using the Inside-Out WAKE code on wake structures of LEO spacecraft are reviewed. For conducting bodies of radius large compared with the Debye length, a high Mach number wake develops a negative potential well. Quasineutrality is violated in the very near wake region, and the wake is relatively empty for a distance downstream of about one half of a Mach number of radii. There is also a suggestion of a core of high density along the axis. A comparison of rigorous numerical solutions with in situ wake data from the AE-C satellite suggests that the so called neutral approximation for ions (straight line trajectories, independent of fields) may be a reasonable approximation except near the center of the near wake. This approximation is adopted for very large bodies. Work concerned with the wake point potential of very large nonconducting bodies such as the shuttle orbiter is described. Using a cylindrical model for bodies of this size or larger in LEO (body radius up to 10 to the 5th power Debye lengths), approximate solutions are presented based on the neutral approximation (but with rigorous trajectory calculations for surface current balance). There is a negative potential well if the body is conducting, and no well if the body is nonconducting. In the latter case the wake surface itself becomes highly negative. The wake point potential is governed by the ion drift energy.

Parker, L. W.↗
NASA NTRS1985

Investigations of radiation-induced and carrier-enhanced conductivity

A steady-state carrier computer code, PECK (Parker Enhanced Carrier Kinetics), that predicts the radiation-induced conductivity (RIC) produced in a dielectric by an electron beam was developed. The model, which assumes instantly-trapped holes, was then applied to experimental measurements on thin Kapton samples penetrated by an electron beam. Measurements at high bias were matched in the model by an appropriate choice for the trap-modulated electron mobility. A fractional split between front and rear currents measured at zone bias is explained on the basis of beam-scattering. The effects of carrier-enhanced conductivity (CEC) on data obtained for thick, free-surface Kapton samples is described by using an analytical model that incorporates field injection of carriers from the RIC region. The computer code, LWPCHARGE, modified for carrier transport, is also used to predict partial penetration effects associated with CEC in the unirradiated region. Experimental currents and surface voltages, when incorporated in the appropriate models, provide a value for the trap modulated mobility that is in essential agreement with the RIC results.

Meulenberg, A., Jr.↗
NASA NTRS1981

Experimental validation of a numerical model predicting the charging characteristics of Teflon and Kapton under electron beam irradiation

The effect differential charging of spacecraft thermal control surfaces is assessed by studying the dynamics of the charging process. A program to experimentally validate a computer model of the charging process was established. Time resolved measurements of the surface potential were obtained for samples of Kapton and Teflon irradiated with a monoenergetic electron beam. Results indicate that the computer model and experimental measurements agree well and that for Teflon, secondary emission is the governing factor. Experimental data indicate that bulk conductivities play a significant role in the charging of Kapton.

Hazelton, R. C.↗
NASA NTRS1980

Three dimensional space charge model for large high voltage satellites

High power solar arrays for satellite power systems with dimensions of kilometers, and with tens of kilovolts distributed over their surface face many plasma interaction problems that must be properly anticipated. In most cases, the effects cannot be adequately modeled without detailed knowledge of the plasma sheath structure and space charge effects. Two computer programs were developed to provide fully self consistent plasma sheath models in three dimensions as a result of efforts to model the experimental plasma sheath studies at NASA/JSC. Preliminary results indicate that for the conditions considered, the Child-Langmuir diode theory can provide a useful estimate of the plasma sheath thickness. The limitations of this conclusion are discussed. Some of the models presented exhibit the strong ion focusing observed in the JSC experiments.

Cooks, D.↗
NASA NTRS1980

Thundercloud electrification models in atmospheric electricity and meteorology

A survey is presented of presently-available theoretical models. The models are classified into three main groups: (1) convection models, (2) precipitation models, and (3) general models. The strengths and weaknesses of the models, their dimensionalities and degrees of sophistication, the nature of their inputs and outputs, and the various specific charging mechanisms treated by them, are considered. In results obtained to date, the convection models predict no significant electrification enhancement based on conductivity gradients and convection alone, with the assumed air circulation patterns. Results of the precipitation models show that the initial electrification can occur rapidly and stably through noninductive collision mechanisms involving ice, and breakdown-strength electric fields can relatively easily be achieved subsequently through the collisional-inductive mechanism. A critical difficulty of the collision mechanisms is imprecise knowledge of relaxation times versus contact times, which can easily lead to overestimates of electrification. The general model results tend to support those of the precipitation models in emphasizing the high potential effectiveness of the collisional-inductive mechanism.

Parker, L. W.↗
NASA NTRS1979

Effects of plasma sheath on solar power satellite array

The structure of the plasma sheath and equilibrium voltage distribution of a high-power solar array governs various kinds of plasma-interaction phenomena and array losses. Sheath effects of a linearly-connected array are investigated for GEO. Although the array may be large, the thin-sheath-limit analysis may be invalid, necessitating numerical methods. Three-dimensional computer calculations show that potential barriers and over-lapping sheaths can occur, i.e., structures not predictable under the thin-sheath-limit analysis, but nevertheless controlling the distribution of plasma currents impacting on the array.

Parker, L. W.↗
NASA NTRS1979

Power loss for high-voltage solar-cell arrays

Electric field particle collection and power loss are calculated in program written in FORTRAN IV for use on UNIVAC 1100/40 computer. Program incorporates positive and negative and negative charge flows and balance between positive and negative flows is performed by iteration.

Parker, L. W.↗
NASA NTRS1979

Plasma sheath effects and voltage distributions of large high-power satellite solar arrays

Knowledge of the floating voltage configuration of a large array in orbit is needed in order to estimate various plasma-interaction effects. The equilibrium configuration of array voltages relative to space depends on the sheath structure. The latter dependence for an exposed array is examined in the light of two finite-sheath effects. One effect is that electron currents may be seriously underestimated. The other is that a potential barrier for electrons can occur, restricting electron currents. A conducting surface is assumed on the basis of a conductivity argument. Finite-sheath effects are investigated. The results of assuming thin-sheath and thick-sheath limits on the floating configuration of a linearly connected array are studied. Sheath thickness and parasitic power leakage are estimated. Numerically computed fields using a 3-D code are displayed in the thick-sheath limit.

Parker, L. W.↗
NASA NTRS1979

Magnetic shielding of large high-power-satellite solar arrays using internal currents

Present concepts for solar power satellites involve dimensions up to tens of kilometers and operating internal currents up to hundreds of kiloamperes. A question addressed is whether the local magnetic fields generated by these strong currents during normal operation can shield the array against impacts by plasma ions and electrons (and from thruster plasmas) which can cause possible losses such as power leakage and surface erosion. One of several prototype concepts was modeled by a long narrow rectangular panel 2 km wide and 20 km long. The currents flow in a parallel across the narrow dimension (sheet current) and along the edge (wire currents). The wire currents accumulate from zero to 100 kiloamp and are the dominant sources. The magnetic field is approximated analytically. The equations of motion for charged particles in this magnetic field are analyzed. The ion and electron fluxes at points on the surface are represented analytically for monoenergetic distributions and are evaluated.

Parker, L. W.↗
NASA NTRS1977

Calculation of sheath and wake structure about a pillbox-shaped spacecraft in a flowing plasma

A computer program was used for studies of the disturbed zones around bodies in flowing plasmas, particularly spacecraft and their associated sheaths and wakes. The program solved a coupled Poisson-Vlasov system of nonlinear partial differential integral equations to obtain distributions of electric potential and ion and electron density about a finite length cylinder in a plasma flow at arbitrary ion Mach numbers. The approach was applicable to a larger range of parameters than other available approaches. In sample calculations, bodies up to 100 Debye lengths in radius were treated, that is, larger than any previously treated realistically. Applications were made to in-situ satellite experiments.

Parker, L. W.↗
NASA NTRS1976

Computation on collisionless steady-state plasma flow past a charged disk

A computer method is presented using the 'inside-out' approach, for predicting the structure of the disturbed zone near a moving body in space. The approach uses fewer simplifying assumptions than other available methods, and is applicable to large ranges of the values of body and plasma parameters. Two major advances concerning 3-dimensional bodies are that thermal motions of ions as well as of electrons are treated realistically by following their trajectories in the electric field, and the technique for achieving self-consistency is promising for very large bodies. Three sample solutions were obtained for a disk-shaped body, charged negatively to a potential 4kT/e. With ion Mach number 4, and equal ion and electron temperatures, the wakes of a relatively small body (radius 5 Debye lengths) and a relatively large body (radius 100 Debye lengths) both begin to fill up between 2 and 3 body radii downstream. For the large body there is in addition a potential well (about 6kT/e deep) behind the body. Increasing the ion Mach number to 8 for the large body causes the potential well to become wider and longer but not deeper. For the large body, the quasineutrality assumption is validated outside of a cone-shaped region in the very near wake. For the large as well as the small body, the disturbed zone behind the body extends transversely no more than 2 or 3 body radii, a result of significance for the design of spacecraft boom instrumentation.

Parker, L. W.↗
NASA NTRS1974

Hydrodynamic solutions at a sonic-boom focus

Study of the focusing of sonic-boom N waves using a numerical shock-following method. The computer code used in the calculations employs a moving mesh so that weak N wave shocks can be followed for large distances without numerical dissipation. In several sample calculations, overpressures at the focus ranging from 2 to 20 times the nominal overpressure have been computed. It is also found that weak shocks tend to cusp at the axis in accord with the geometric-acoustics description, whereas strong shocks straighten out without cusping.

Parker, L. W.↗
NASA NTRS1973

Iterative methods for plasma sheath calculations: Application to spherical probe

The computer cost of a Poisson-Vlasov iteration procedure for the numerical solution of a steady-state collisionless plasma-sheath problem depends on: (1) the nature of the chosen iterative algorithm, (2) the position of the outer boundary of the grid, and (3) the nature of the boundary condition applied to simulate a condition at infinity (as in three-dimensional probe or satellite-wake problems). Two iterative algorithms, in conjunction with three types of boundary conditions, are analyzed theoretically and applied to the computation of current-voltage characteristics of a spherical electrostatic probe. The first algorithm was commonly used by physicists, and its computer costs depend primarily on the boundary conditions and are only slightly affected by the mesh interval. The second algorithm is not commonly used, and its costs depend primarily on the mesh interval and slightly on the boundary conditions.

Parker, L. W.↗