Search NASA⌕ Search

Engineering topics

Parker, S.

Publications and source records attributed to Parker, S..

At least 19 records

Gyrokinetic benchmark of the electron temperature-gradient instability in the pedestal region

Transport from turbulence driven by the electron temperature-gradient (ETG) instability is likely a major source of electron heat losses through the pedestal. Due to extreme gradients and strong shaping, ETG instabilities in the pedestal are distinct from those in the core, having, for example, multiple branches (toroidal and slab) in different wavenumber ranges. Due to its importance for pedestal transport, and its rather exotic character, a rigorous multi-code benchmarking exercise is imperative. In this work, we describe such an exercise, wherein we have carried out a detailed comparison of local linear pedestal ETG simulations using three gyrokinetic codes, CGYRO, GEM, and GENE and testing different geometric parameters (such as circular, Miller, and equilibrium EFIT geometry). The resulting linear frequencies, growth rates, and eigenfunctions show very good agreement between the codes in the three types of employed geometries. A nonlinear benchmark between CGYRO and GENE is also described, exhibiting good agreement (a maximum of 20% difference in the heat fluxes computed) at two locations in the pedestal. This lays the foundation for confidently modeling ETG turbulence in the pedestal

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First coupled GENE–XGC microturbulence simulations

Covering the core and the edge region of a tokamak, respectively, the two gyrokinetic turbulence codes Gyrokinetic Electromagnetic Numerical Experiment (GENE) and X-point Gyrokinetic Code (XGC) have been successfully coupled by exchanging three-dimensional charge density data needed to solve the gyrokinetic Poisson equation over the entire spatial domain. Certain challenges for the coupling procedure arise from the fact that the two codes employ completely different numerical methods. This includes, in particular, the necessity to introduce mapping procedures for the transfer of data between the unstructured triangular mesh of XGC and the logically rectangular grid (in a combination of real and Fourier space) used by GENE. Constraints on the coupling scheme are also imposed by the use of different time integrators. First, coupled simulations are presented. We have considered collisionless ion temperature gradient turbulence, in both circular and fully shaped plasmas. Coupled simulations successfully reproduce both GENE and XGC reference results, confirming the validity of the code coupling approach toward a whole device model. Here, many lessons learned in the present context, in particular, the need for a coupling procedure as flexible as possible, should be valuable to our and other efforts to couple different kinds of codes in pursuit of a more comprehensive description of complex real-world systems and will drive our further developments of a whole device model for fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of edge turbulence characteristics between DIII-D and C-Mod simulations with XGC1

The physical processes taking place at the separatrix and scrape-off layer regions are crucial for the operation of tokamaks as they govern the interaction of hot plasma with the vessel walls. Numerical modeling of the edge with state-of-the-art codes attempts to elucidate the complex interactions between neoclassical drifts, turbulence, poloidal and parallel flows that control the physical set-up of the SOL region. Here, we present post-processing analysis of simulation results from the gyrokinetic code XGC1, comparing and contrasting edge turbulence characteristics from a simulation of the DIII-D tokamak against a simulation of the Alcator C-Mod tokamak. We find that the equilibrium ExB flux across the separatrix has a similar poloidal pattern in both discharges which can be explained by rB-drifts and trapped ion excursions. Furthermore, collisionality is noted to play a major role in the way that it prevents local charge accumulations from having more global effects in the C-Mod case. In both cases, turbulent electron heat flux is observed to be higher than the ion one and is possibly related to the need of electrons to maintain quasineutrality through the only channel available to them for exiting the confinement. By Fourier analysis, we identify turbulent frequencies and growth rates of the dominant mode in both simulations. In the case of C-Mod, these numbers point to the presence of a drift wave. In the DIII-D case, further linear simulations with the Gene code reveal a trapped electron mode. Furthermore, using a blob detection and tracking tool, we present the amplitude and size distributions of the blobs from both simulations. The amplitude distributions are in qualitative agreement with experimental observations while the size distributions are consistent with the fact that most of the blobs are not connecting to the divertor plates and suggest that they are generated by the shearing of the turbulent modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A tight-coupling scheme sharing minimum information across a spatial interface between gyrokinetic turbulence codes

A new scheme that tightly couples kinetic turbulence codes across a spatial interface is introduced. This scheme evolves from considerations of competing strategies and down-selection. It is found that the use of a composite kinetic distribution function and fields with global boundary conditions as if the coupled code were one makes the coupling problem tractable. In contrast, coupling the two solutions from each code across the overlap region is found to be more difficult due to numerical dephasing of the turbulent solutions between two solvers. Finally, another advantage of the new scheme is that the data movement can be limited to the 3D fluid quantities, instead of higher dimensional kinetic information, which is computationally more efficient for large scale simulations on leadership class computers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of equilibrium and turbulent fluxes across the separatrix in a gyrokinetic simulation

The SOL width is a parameter of paramount importance in modern tokamaks as it controls the power density deposited at the divertor plates, critical for plasma-facing material survivability. An understanding of the parameters controlling it has consequently long been sought. Prior to Chang et al. (2017 NF 57 11), studies of the tokamak edge have been mostly confined to reduced fluid models and simplified geometries, leaving out important pieces of physics. Here, we analyze the results of a DIII-D simulation performed with the full-f gyrokinetic code XGC1 which includes both turbulence and neoclassical effects in realistic divertor geometry. More specifically, we calculate the particle and heat E x B fluxes along the separatrix, discriminating between equilibrium and turbulent contributions. We find that the density SOL width is impacted almost exclusively by the turbulent electron flux. In this simulation, the level of edge turbulence is regulated by a mechanism we are only beginning to understand: grad-B-drifts and ion X-point losses at the top and bottom of the machine, along with ion banana orbits at the low field side (LFS), result in a complex poloidal potential structure at the separatrix which is the cause of the E x B drift pattern that we observe. Turbulence is being suppressed by the shear flows that this potential generates. At the same time, turbulence, along with increased edge collisionality and electron inertia, can influence the shape of the potential structure by making the electrons non-adiabatic. Furthermore, being the only means through which the electrons can lose confinement, it needs to be in a balance with the original direct ion orbit losses to maintain charge neutrality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cross-verification of the global gyrokinetic codes GENE and XGC

A detailed cross-verification between two global gyrokinetic codes, the core continuum code GENE and the edge particle-in-cell code XGC, for the linear and nonlinear simulations of ion-temperature-gradient modes is carried out. With the recent developments in the edge gyrokinetics, it may be feasible someday to describe the whole tokamak plasma on turbulence timescales using a coupled gyrokinetic simulation model. Before pursuing this, the core code (GENE) and the edge code (XGC) must be carefully benchmarked with each other. The present verification provides a solid basis for future code coupling research. Also included in the benchmarking is the global particle-in-cell code ORB5, to raise the confidence in the quality of the obtained results. An excellent agreement between all three codes is obtained. Lastly, in order to facilitate a benchmark framework for other codes, we make a specific effort to provide all the relevant input parameters and precise details for each code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Transition of a Type IIL Supernova into a Supernova Remnant: Late-time Observations of SN 2013by

We present early-time Swift and Chandra X-ray data along with late-time optical and near-infrared observations of SN 2013by, a Type IIL supernova (SN) that occurred in the nearby spiral galaxy ESO 138−G10 ( D ∼ 14.8 Mpc). Optical and NIR photometry and spectroscopy follow the late-time evolution of the SN from days +89 to +457 post maximum brightness. The optical spectra and X-ray light curves are consistent with the picture of an SN having prolonged interaction with circumstellar material (CSM) that accelerates the transition from SN to supernova remnant (SNR). Specifically, we find SN 2013by’s H α profile exhibits significant broadening (∼10,000 km s{sup −1}) on day +457, the likely consequence of high-velocity, H-rich material being excited by a reverse shock. A relatively flat X-ray light curve is observed that cannot be modeled using Inverse Compton scattering processes alone, but requires an additional energy source most likely originating from the SN-CSM interaction. In addition, we see the first overtone of CO emission near 2.3 μ m on day +152, signaling the formation of molecules and dust in the SN ejecta and is the first time CO has been detected in a Type IIL SN. We compare SN 2013by with Type IIP SNe, whose spectra show the rarely observed SN-to-SNR transition in varying degrees and conclude that Type IIL SNe may enter the remnant phase at earlier epochs than their Type IIP counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

A novel in-situ, lift-out, three-point bend technique to quantify the mechanical properties of an ex-service neutron irradiated inconel X-750 component

A first of its kind small scale mechanical testing technique involving micro-three-point bending was invented, developed, and implemented on reactor irradiated, active Inconel X-750 components removed from service after approximately 53 and 67 dpa. These tests were performed at ambient room temperature in-situ using a scanning electron microscope in order to obtain live recordings of sample deformation and loading curves. Sample and testing apparatus preparation required novel lift-out and fabrication processes. Materials from two irradiation temperature regimes, low temperature (120-280 °C) and high temperature (300 ± 15 °C) were examined. Manufacturing and finishing (grinding) of this component create differences between its edge and center, so micro-specimens from both areas were extracted in order to study these differences. According to three-point beam bending theory, a 0.2% offset yield stress parameter is introduced and calculated for all specimens. Differences in mechanical properties due to irradiation temperature and dose effects were observed. Material irradiated at the higher temperature exhibited yield strength increases of ~540 MPa after 53 dpa and ~1000 MPa after 67 dpa. There was little difference (≤310 MPa) in yield strength between materials irradiated at the lower temperature at 53 dpa and 67 dpa compared with non-irradiated material. Differences in yield strengths between the edge and center of the component are retained after irradiation. The difference in yield strengths for the edge and center regions was ~740 MPa for non-irradiated material. After irradiation to a dose of 67 dpa these differences were ~570 MPa for the lower irradiation temperature and ~710 MPa for higher irradiation temperature. There were no indications of grain boundary failures via cracking except for material irradiated to 67 dpa at low temperature.

36 MATERIALS SCIENCE↗

Degradation of HT9 under simultaneous ion beam irradiation and liquid metal corrosion

A potentially promising coolant/structural material pair for a liquid-metal-cooled fast reactors is lead bismuth eutectic (LBE) coolant with the ferritic/martensitic steel HT9. The challenge of deploying LBE, however, is the corrosive environment it creates for structural materials. This corrosion can be mitigated with precise oxygen content control in the LBE to allow for the growth of passive protective oxide layers on the surface of the steel. In this paper, results are reported from the Irradiation Corrosion Experiment II (ICE-II), which allowed the simultaneous irradiation of a sample while in contact with LBE. It was found that a characteristic multilayer structure with an outer Fe 3 O 4 oxide and inner FeCr 2 O 4 spinel was grown and the oxidation was significantly larger in the irradiated region when compared to the region that was only exposed to LBE corrosion. As a result, a possible mechanisms are discussed to help understand this irradiation enhanced corrosion behavior.

36 MATERIALS SCIENCE↗

WE-G-BRC-03: Risk Assessment for Physics Plan Review

Failure Mode and Effects Analysis (FMEA) originated as an industrial engineering technique used for risk management and safety improvement of complex processes. In the context of radiotherapy, the AAPM Task Group 100 advocates FMEA as the framework of choice for establishing clinical quality management protocols. However, there is concern that widespread adoption of FMEA in radiation oncology will be hampered by the perception that implementation of the tool will have a steep learning curve, be extremely time consuming and labor intensive, and require additional resources. To overcome these preconceptions and facilitate the introduction of the tool into clinical practice, the medical physics community must be educated in the use of this tool and the ease in which it can be implemented. Organizations with experience in FMEA should share their knowledge with others in order to increase the implementation, effectiveness and productivity of the tool. This session will include a brief, general introduction to FMEA followed by a focus on practical aspects of implementing FMEA for specific clinical procedures including HDR brachytherapy, physics plan review and radiosurgery. A description of common equipment and devices used in these procedures and how to characterize new devices for safe use in patient treatments will be presented. This will be followed by a discussion of how to customize FMEA techniques and templates to one’s own clinic. Finally, cases of common failure modes for specific procedures (described previously) will be shown and recommended intervention methodologies and outcomes reviewed. Learning Objectives: Understand the general concept of failure mode and effect analysis Learn how to characterize new equipment for safety Be able to identify potential failure modes for specific procedures and learn mitigation techniques Be able to customize FMEA examples and templates for use in any clinic.

60 APPLIED LIFE SCIENCES↗

The granular and polymer composite nature of kerogen-rich shale

In the past decade, mechanical, physical, and chemical characterization of reservoir shale rocks, such as the Woodford shale, which is kerogen-rich shale (KRS), has moved toward micro- and nanoscale testing and analyses. Nanoindentation equipment is now widely used in many industrial and university laboratories to measure shale anisotropic Young’s moduli, kerogen stiffness, plastic yield parameters, and other isotropic and anisotropic poromechanical and viscoelastic properties. However, to date, failure analyses of KRS and the effects of organic components on the tensile strength have not been observed or measured at the micro- or nanoscales. In this study, preserved kerogen-rich Woodford shale samples manufactured in micro-beam and micro-pillar geometries were mechanically tested and brought to failure in tension and compression, respectively. These tests were conducted in situ using a nanoindenter inside a scanning electron microscope (SEM). The load versus displacement curves of prismatic micro-cantilever beams were analyzed in light of high-resolution images collected during tensile fracture initiation, propagation, and ultimately sample failure. The micro-pillar geometries were subjected to a uniaxial compressive load and were also brought to failure while capturing measurements of stress and strain. It was found that, within just a few hundred microns of the KRS microcantilever beams, both brittle and ductile failure modes were observed. In the ductile plastic domain, strain-softening and strain-hardening behaviors were identified and characterized. These were not due to confining stress variations, but due to the volume of the organic matter and the way it is interlaced with the shale minerals in and around the failure planes. The tensile strength characteristics and the large modulus of toughness of kerogen, which is a cross-linked polymer, definitely weigh heavily in our engineering field applications, such as hydraulic fracking, which is a Mode I tensile fracture opening and propagation phenomenon. This practice demands that, due to the complex composite nature of KRS, mechanical characterization be not only for unconfined compressive strength but also for unconfined tensile strength and moduli of ruptures. At the end of this study, the need for nanometer scale mechanical characterization of KRS will become apparent. Furthermore, these nano- and micro-scale shale failure tests reinforce our previous understanding of the heterogeneous composite nature of Woodford KRS and its complex behavior, as well as other source shale reservoir formations.

58 GEOSCIENCES↗

Investigation of specimen size effects by in-situ microcompression of equal channel angular pressed copper

Here, micropillar compression testing was implemented on Equal Channel Angular Pressed copper samples ranging from 200 nm to 10 µm in side length in order to measure the mechanical properties yield strength, first load drop during plastic deformation at which there was a subsequent stress decrease with increasing strain, work hardening, and strain hardening exponent. Several micropillars containing multiple grains were investigated in a 200 nm grain sample. The effective pillar diameter to grain size ratios, D/d , were measured to be between 1.9 and 27.2. Specimens having D/d ratios between 0.2 and 5 were investigated in a second sample that was annealed at 200 °C for 2 h with an average grain size of 1.3 µm. No yield strength or elastic modulus size effects were observed in specimens in the 200 nm grain size sample. However work hardening increases with a decrease in critical ratios and first stress drops occur at much lower stresses for specimens with D/d ratios less than 5. For comparison, bulk tensile testing of both samples was performed, and the yield strength values of all micropillar compression tests for the 200 nm grained sample are in good agreement with the yield strength values of the tensile tests.

36 MATERIALS SCIENCE↗

Evaluation of the Mechanical Properties of Naturally Grown Multilayered Oxides Formed on HCM12A Using Small Scale Mechanical Testing

The microstructure and mechanical integrity of protective multilayered oxide films grown in liquid metal on F/M steel HCM12A was investigated utilizing Raman spectroscopy, nanoindentation and micro-cantilever testing methods. Here, the Raman spectra showed a Fe3O4 outer layer and a Cr-rich spinel structure inner layer. The nanoindentation results showed a higher hardness value for the inner layer than for the outer layer. In addition, the hardness of the diffusion layer in between the inner layer and the bulk steel was measured. Quantitative fracture properties were obtained of the steel/oxide interface and within the oxide layers utilizing microcantilever testing. Furthermore the strength and elastic properties of the multilayered oxide film were measured and it was found that the porous structure in the inner Fe–Cr oxide limits the integrity of the steel/oxide interface.

14 SOLAR ENERGY↗

An in-vacuo optical levitation trap for high-intensity laser interaction experiments with isolated microtargets

We report on the design, construction, and characterisation of a new class of in-vacuo optical levitation trap optimised for use in high-intensity, high-energy laser interaction experiments. The system uses a focused, vertically propagating continuous wave laser beam to capture and manipulate micro-targets by photon momentum transfer at much longer working distances than commonly used by optical tweezer systems. A high speed (10 kHz) optical imaging and signal acquisition system was implemented for tracking the levitated droplets position and dynamic behaviour under atmospheric and vacuum conditions, with ±5 μm spatial resolution. Optical trapping of 10 ± 4 μm oil droplets in vacuum was demonstrated, over timescales of >1 h at extended distances of ∼40 mm from the final focusing optic. The stability of the levitated droplet was such that it would stay in alignment with a ∼7 μm irradiating beam focal spot for up to 5 min without the need for re-adjustment. The performance of the trap was assessed in a series of high-intensity (10{sup 17} W cm{sup −2}) laser experiments that measured the X-ray source size and inferred free-electron temperature of a single isolated droplet target, along with a measurement of the emitted radio-frequency pulse. These initial tests demonstrated the use of optically levitated microdroplets as a robust target platform for further high-intensity laser interaction and point source studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microstructure and mechanical properties of Cu x Nb 1-x alloys prepared by ball milling and high pressure torsion compacting

Here, new Cu x Nb 1-x alloys were prepared using a two-step process of ball milling and subsequent high pressure torsion compacting at ambient temperature. The alloys showed a nanocrystalline structure with grain sizes between 13–26 nm for the Cu-rich samples and 11–13 nm for the Nb-rich samples. The grain sizes decreased with the milling time and the amount of Nb in the Cu-rich and Cu in the Nb-rich samples, respectively. The distortion of the crystallographic lattice of the fcc Cu and bcc Nb suggests the formation of a solid solution. The mechanical properties studied by nanoindentation show an increase of the hardness with milling time and the amount of added element. A thermal treatment was carried out under a protective Argon atmosphere. Up to 400 °C the Cu-rich samples do not show significant signs of oxidation and in increase of hardness. The Nb-rich samples showed a continuous increase of the hardness up to 500°C, due to the precipitation of Cu, and the initial formation of NbO x .

36 MATERIALS SCIENCE↗

3D IC for Future HEP Detectors

Three dimensional integrated circuit technologies offer the possibility of fabricating large area arrays of sensors integrated with complex electronics with minimal dead area, which makes them ideally suited for applications at the LHC upgraded detectors and other future detectors. Here we describe ongoing R&D efforts to demonstrate functionality of components of such detectors. This also includes the study of integrated 3D electronics with active edge sensors to produce "active tiles" which can be tested and assembled into arrays of arbitrary size with high yield.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A verification of the gyrokinetic microstability codes GEM, GYRO, and GS2

A previous publication [R. V. Bravenec et al., Phys. Plasmas 18, 122505 (2011)] presented favorable comparisons of linear frequencies and nonlinear fluxes from the Eulerian gyrokinetic codes gyro[J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)] and gs2[W. Dorland et al., Phys. Rev. Lett. 85, 5579 (2000)]. The motivation was to verify the codes, i.e., demonstrate that they correctly solve the gyrokinetic-Maxwell equations. The premise was that it is highly unlikely for both codes to yield the same incorrect results. In this work, we add the Lagrangian particle-in-cell code gem[Y. Chen and S. Parker, J. Comput. Phys. 220, 839 (2007)] to the comparisons, not simply to add another code, but also to demonstrate that the codes' algorithms do not matter. We find good agreement of gem with gyro and gs2 for the plasma conditions considered earlier, thus establishing confidence that the codes are verified and that ongoing validation efforts for these plasma parameters are warranted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗