Search NASA⌕ Search

Engineering topics

Parker, T. J.

Publications and source records attributed to Parker, T. J..

At least 55 records · Page 3

Overview of the Mars Pathfinder mission and assessment of landing site predictions

Chemical analyses returned by Mars Pathfinder indicate that some rocks may be high in silica, implying differentiated parent materials. Rounded pebbles and cobbles and a possible conglomerate suggest fluvial processes that imply liquid water in equilibrium with the atmosphere and thus a warmer and wetter past. The moment of inertia indicates a central metallic core of 1300 to 2000 kilometers in radius. Composite airborne dust particles appear magnetized by freeze-dried maghemite stain or cement that may have been leached from crustal materials by an active hydrologic cycle. Remote-sensing data at a scale of generally greater than approximately 1 kilometer and an Earth analog correctly predicted a rocky plain safe for landing and roving with a variety of rocks deposited by catastrophic floods that are relatively dust-free.

unmanned↗

Selection of the Mars Pathfinder Landing Site

The Mars Pathfinder spacecraft will land on a depositional fan near the mouth of the catastrophic outflow channel, Ares Vallis (19.5 deg N, 32.8 deg W). This site offers the prospect of analyzing a variety of rock types from the ancient cratered highlands, intermediate-age ridged plains, and reworked channel deposits. Analyses of these rocks by Pathfinder instruments will enable first-order scientific questions to be addressed, such as differentiation of the crust, the development of weathering products, and the nature of the early environment, as well as their subsequent evolution on Mars. Constraints imposed by: (1) spacecraft and rover designs (which are robust), (2) entry, descent, and landing, (3) scientific potential at various sites, and (4) safety were important considerations in site selection. Engineering constraints require a 70 km by 200 km smooth, flat (low slopes) area located between 10 deg and 20 deg N that is below 0 km elevation, with average radar reflectivity, little dust, and moderate rock abundance. Three regions on Mars are between 10 deg and 20 deg N and below 0 km elevation: Chryse, Amazonis, and Isidis-Elysitun. Science considerations favor sites at the mouths of outflow channels (grab bag sites offer an assay of rock types on Mars), highland sites (early crustal differentiation and climate), and sites covered with dark (unoxidized) material. Sites are considered safe if they are clearly below 0 km elevation, appear acceptably free of hazards in high-resolution (less than 50 m/pixel) Viking orbiter images and have acceptable reflectivity and roughness at radar wavelengths, thermal inertia, rock abundance, red to violet ratio, and albedo. Recent 3.5-cm wavelength radar observations were used to verify elevation, reflectivity, and roughness within the landing ellipses. Three sites meet all of these criteria: Ares Vallis, Tritonis Lacus, and Isidis. Although Isidis appears to be safer than Tritonis and Ares, the greater scientific potential at Ares Vallis resulted in its selection. Comparisons of the Grand Coulee (channel) and the depositional Ephrata Fan of the Channeled Scabland in eastern Washington, with Ar-es Vallis and its depositional fan also suggest the Ares Vallis landing site is safe and scientifically interesting.

Golombek, M. P.↗

Selection of the Mars Pathfinder Landing Site

The Mars Pathfinder spacecraft will land on a depositional fan near the mouth of the catastrophic outflow channel, Ares Vallis (19.5°N, 32.8°W). This site offers the prospect of analyzing a variety of rock types from the ancient cratered highlands, intermediate age ridged plains, and reworked channel deposits. Analyses of these rocks by Pathfnder instruments will enable first order scientific questions to be addressed, such as differentiation of the crust, the development of weathering products and the nature of the early environment, as well as their subsequent evolution on Mars.

Mars↗

Relief of some small landforms on Venus

Three sets of radar images have been acquired under different viewing conditions by the Magellan synthetic aperture radar: (1) left-looking with varied incidence angles (cycle 1); (2) right-looking with nearly constant incidence angles (cycle 2); and (3) left-looking with varied incidence angles, most of which were smaller than those in (1) except for those acquired on passes across Maxwell Montes with incidence angles larger than those in (1) (cycle 3). Image displacements in the radar images that are caused by the relief of landforms provide several methods of estimating this relief: (1) monoscopic measurements of foreshortening of landforms that are symmetrical in the plane of the look-direction of the radar (includes radial symmetry); (2) stereoscopic measurements of parallax in same-side image pairs (cycles 1-2 and 3); and (3) measurements of parallax in opposite-side image pairs (cycles 1-2 and/or 2-3). Success in methods 2 and 3 (especially 3) depends on identifying conjugate image points in the two images. Here, we report our preliminary results for five impact craters, seven small volcanic edifices, and two lava flows. The three methods mentioned above lead to the interesting result that Venusian impact craters have depth-diameter ratios like those on Mars rather than those on Earth, but some appear partly filled. Our results for de Lalande and Melba also suggest filling, but there may be other causes for their relatively small depth-diameter ratios. A host of small volcanic edifices have relief that can be crudely estimated using the above methods. Relief/diameter ratios for our cratered cones are about the same as those of Icelandic lava shields; some Venusian cones resemble the Martian shields of Mareotis-Tempe and Ceraunius Fossae, but the Venusian relief diameter ratios are larger. The smallest cratered dome is similar in size and profile to a Martian dome north of Uranius Patera; the smallest cratered cone resembles one in Chryse Planitia. Lava flows on Venus that are thick enough to measure are rare, but we have applied methods 1 and 3 to the huge flow of Ovda Regio and flows of an unusual volcano, Mahuea Tholus.

Moore, H. J.↗

A marine sedimentary model for the evolution of the northern plains

For the purpose of focusing the following discussion, we begin with the reasonable assumption that landforms interpreted to be shorelines can be considered to be as diagnostic of former water levels within the northern plains of Mars as lava flows are of former volcanism. Once (or if) this interpretation of these features becomes more generally accepted and the compositional and topographic datasets for Mars improve, their distribution can be used to make valuable independent estimates of the planet's water budget by providing quantitative measures of surface reservoir volumes at specific instances in Martian history. The problem is approached from a consideration of the basin's volume and its implied requirement on juvenile water sources and channel discharges, rather than the other way around.

Parker, T. J.↗

Constraints on the rate of discharge and duration of the Mangala Valles flood

Interest in Mangala Valles remains high within the planetary science community. This is justified because the survey mission images provide us with nearly complete coverage of the system at high resolution. Upcoming high resolution topography from the Mars Observer Laser Altimeter will enable the application of flood discharge models with an unprecedented level of detail. Previous work on the Mangala Valles problem has relied on the available low resolution topography. This has limited the ability of workers to constrain discharge calculations to only within several-order-of-magnitude estimates. Local determinations of channel depths via shadow length measurements and photoclinometric profiling are much more accurate, but can only be applied to steep slopes (and/or low sun elevations) in the case of shadow measurements, or across relatively short distances (to avoid changes in albedo along asymmetric photoclinometric profiles). We are taking stereo parallax measurements from medium resolution Viking Orbiter images, which provide a valuable intermediate check of the topography between those measurements made thus far and the upcoming Mars Observer data. The images used are from orbits 034A and 637A, and cover Mangala Valles from the source graben in Memnonia Fossae to the beginning of the bifurcated reach (at 9.5 deg lat., 151.5 deg lon.). These images are about 300 m/pixel and 250 m/pixel, respectively. Both sets of images were orthographically projected to 250 m/pixel. The separation angle between left-right pairs is approximately 52 degrees. This results in a vertical accuracy on the order of plus or minus 260 m. Though this is still somewhat coarse, the channel relief is clearly resolved. Preliminary profiles across Mangala Valles and the large topographic ridge to the east are shown on the following page. An east-west regional tilt that resulted from slight scaling differences in the digital data has been 'removed' by visually estimating a regional datum on the stereo pairs. North-south variations in scale have not yet been adjusted for, so the zero datum for each profile was simply taken to be the high water line of the channel itself. Our depth measurement for the source breach of about 750 m agrees reasonably well with values of 700-1000 m determined from shadow measurements.

Parker, T. J.↗

Apron heights around stepped massifs in the Cydonia Mensae region: Do they record the local paleobathymetry of Oceanus Borealis?

The use of photoclinometry and shadow measurements to determine the basin volume without linking the measurements to a global datum is described. Since the boundary, or shoreline, of the basin cannot be tied to the datum and typically has no useful local relative height to measure, what is needed is a number of measurements of the height of the paleoshorelines distributed across the basin. Photoclinometric profiles are being compiled from Viking Orbiter images of the Cydonia Mensae region, which includes images with high sun elevations, necessary to avoid shadows, and images with low sun elevations, to enable the use of shadow measurements as an independent check, at high resolution (40 to 100 m/pixel). Both asymmetric and symmetric photoclinometric profile models are being used, and the results cross checked with one another to minimize errors. An apron-height map, potentially a paleobathymetric map of part of the margin of Oceanus Borealis, can be compiled from this data to determine whether variations in apron height are consistent with a lacustrine interpretation.

Parker, T. J.↗

Workshop on the Martian Northern Plains: Sedimentological, periglacial, and paleoclimatic evolution

The penultimate meeting in the Mars Surface and Atmosphere Through Time (MSATT) series of workshops was held on the campus of the University of Alaska in Fairbanks, Alaska, 12-13 Aug. 1993. This meeting, entitled 'The Martian Northern Plains: Sedimentological, Periglacial, and Paleoclimatic Evolution,' hosted by the Geophysical Institute at the University of Alaska, was designed to help foster an exchange of ideas among researchers of the Mars science community and the terrestrial glacial and periglacial science community. The technical sessions of the workshop were complemented by field trips to the Alaska Range and to the Fairbanks area and a low-altitude chartered overflight to the Arctic Costal Plain, so that, including these trips, the meeting lasted from 9-14 Aug. 1993. The meeting, field trips, and overflight were organized and partially funded by the Lunar and Planetary Institute and the MSATT Study Group. The major share of logistical support was provided by the Publications and Program Services Department of the Lunar and Planetary Institute. The workshop site was selected to allow easy access to field exposures of active glaciers and glacial and periglacial landforms. In all, 25 scientists attended the workshop, 24 scientists (plus 4 guests and the meeting coordinator) participated in the field trips, and 18 took part in the overflight. This meeting reaffirmed the value of expertly led geologic field trips conducted in association with topical workshops.

Kargel, J. S.↗

Channels and valleys on Venus - Preliminary analysis of Magellan data

A preliminary survey of Magellan imagery reveals more than 200 newly discovered relic channel and valley landform complexes. For purposes of discussion the channels can be classed as simple, complex, and compound. Integrated valleys also occur. Simple channels include: (1) sinuous rilles that closely resemble their lunar counterparts and (2) a newly recognized long sinuous form of high width-to-depth ratio and remarkably constant width. Herein designated canali, the most spectacular of these channels is 6800 km long. One of the compound channels, an outflow complex in Lada Terra, extends over 1200 km and is up to 30 km wide. Streamlined hills and spill relationships at a cross-axial ridge are similar to features in flood channels. Venusian channels have a global distribution with most of the large canali-type channels developed on volcanic plains. Alternative hypotheses for the channel-forming processes include genesis by the following erosive fluids: ultramafic silicate melts, sulfur, and carbonate lavas. Each of these causative agents has profound implications for Venusian planetology. The remote possibility of an aqueous origin, indicated by apparent regime behavior of the active channeling process, cannot be excluded with absolute certainty.

Baker, V. R.↗

Erosional landforms on the layered terrains in Valles Marineris

Many investigators have proposed potential lakes in Valles Marineris based on the relationship with outflow channels, and a proposed lacustrine origin of layered deposits. We have investigated the erosional style of the layered terrains and evaluated their potential origins as sedimentation in and erosional modification by these lakes. The erosional features that will be discussed are distributed in the central canyon area and classified into terraces and layered depressions. Many terraces can be explained by coastal erosion in lakes as well as by eolian erosion. The lack of terraces on the canyon walls is probably due to more recent sapping and mass wasting of materials with different mechanical response to erosion than the layered terrains. Catastrophic water discharges in Valles Marineris as hypothesized by an ocean model may have been the source of the lakes and the eventual catastrophic release of water from the canyons.

Komatsu, G.↗

Distribution of coastal morphology in the Martian northern lowlands

The northern plains of Mars exhibit boundary morphologies that were interpreted as shorelines of a sea that formed as a result of flooding from the major outflow channel along the periphery of the lowlands. Earlier work focused on a morphologic description based on the very high resolution images available in the west Deuteronilus Mensae region where these boundaries and their relationships to pre-existing features could be most readily characterized. Here, we wish to describe the criteria used in the earlier identification.

Parker, T. J.↗

Magellan stereo images and Venusian geology

Areas of Venus imaged by Magellan radar with multiple viewing conditions provide unique data that will contribute to the solution of venusian geologic problems and provide a basis for quantitative comparison of venusian landforms with those on other planetary bodies. Three sets of images with different viewing conditions have been acquired: (1) left-looking with variable incidence angles (cycle 1 profile), (2) right-looking with nearly constant incidence angles (cycle 2 profile), and (3) left-looking with variable incidence angles that are almost always smaller than those in (1) (cycle 3 profiles). The unique data provided by paired images of the same scene with different incidence angles arises from image displacements caused by the relief of individual landforms at scales comparable to the ground-range and azimuth resolutions of the images. There are two aspects of the data: (1) Stereopsis achieved by simultaneous viewing of paired left-looking images of the same scene permits three-dimensional perception and interpretation of the morphologies of landforms at resolutions much finer than the altimetry footprints. (2) Measurements of differences of image displacements (parallax) on paired images with known imaging geometries provide quantitative estimates of the relief and shapes of landforms. The potential scientific contributions of the data can be grouped into two interrelated classes: (A) geologic mapping, analysis, and interpretation and (B) topical studies that involve topographic measurements. Stereopsis, without quantitative measurements, enhances geologic mapping, analysis, and interpretation of the rock units of Venus to a degree that cannot be overestimated. In geologic mapping, assemblages of landforms, assessments of backscatter and variations in backscatter, and fine-scale topography are used to define and characterize geologic map units that represent laterally continuous deposits or rock units. Stereopsis adds the important dimension of local relief for characterization of geologic units at a scale that is not possible with Magellan altimetry or products derived from the altimetry. Relative ages of the geologic units are determined using the well-known principles of superposition and intersection. Here, the perception of relief is invaluable because superposition relations among the geological units are more readily and clearly established. The recognition of folds, faults, and fault systems, regardless of their orientations, is facilitated with stereopsis so that sequences of deformation of the geologic units can be determined and structural analyses vastly improved. Shapes of landforms are readily perceived so that they can be properly interpreted. The end result of the mapping, analyses, and interpretations is a geologic history of Venus that includes the sequences of formation and deformation of various geologic units. Measurements of relief at the finest scale possible are necessary for numerous topical studies. Standard altimetry will provide the necessary information on the relief of most large landforms, but it tends to underestimate the relief of small landforms and distorts their shapes. Although special processing of the altimeter echoes improves the estimates of the relief and shapes of some landforms, there are uncertainties in the interpretations of the echoes. Examples of topical studies requiring measurements of relief are given.

Moore, H. J.↗

Application of left- and right-looking SAR stereo to depth measurements of the Ammavaru outflow channel, Lada Terra, Venus

Venusian channels are too narrow to be resolved by Magellan's radar altimeter, so they are not visible in the standard topographic data products. Stereo image data, in addition to their benefit to geologic mapping of Venus structures as a whole, are indispensible in measuring the topography across the channels. These measurements can then be used in conjunction with the regional topographic maps based on the altimeter data to produce cross-sectional areas for the channels and estimate the fluid discharge through them. As an example of the application of the stereo image data to venusian channels, a number of test depth and profile measurements were made of the large outflow channel system in Lada Terra, centered at 50 deg S latitude, 21 deg E longitude (F-MIDR 50S021). These measurements were made by viewing the cycle 1 and 2 digital FMIDRs in stereo on a display monitor, so as to minimize the errors in measuring parallax displacement as much as possible. The MIDRs are produced at a scale of 75 m/pixel. This corresponds to a vertical scale of about 17 m/pixel, when calculating the height of a feature from its parallax displacement. An error in placement determination of 1 pixel was assumed to characterize the vertical accuracy as plus or minus 17 m. When this technique was applied to the outflow channel, it was noted that the walls of the collapsed terrain source and 'trough reach' of the channel are laid over in both the cycle 1 and 2 images. This is evident when examining the distance between features on the plateau and the cliff walls in the two images. The layover 'shifts' the features closer to the apparent edge of the wall relative to the oppositely illuminated image.

Parker, T. J.↗

Properties of filamentary sublimation residues from dispersions of clay in ice

Results are reported from experimental studies of the formation of ice mixed with mineral particles in an effort to simulate similar processes on natural surfaces such as at the Martian poles, on comet nuclei and on icy satellites. The study consisted of low-pressure, low-temperature sublimations of water ice from dilutions of water-clay (montmorillonite and Cabosil) dispersions of various component ratios. Liquid dispersions were sprayed into liquid nitrogen to form droplets at about -50 C. Both clay-water dispersions left a filamentary residue on the bottom of the Dewar after the water ice had sublimated off. The residue was studied with optical and SEM microscopy, the latter method revealing a high electrical conductivity in the residue. The results suggest that the sublimation of the water ice can leave a surface crust, which may be analogous to processes at the Martian poles and on comet nuclei. The process could proceed by the attachment of water molecules to salt crystals during the hottest part of the Martian year. The residue remaining was found to remain stable up to 370 C, be porous, and remain resilient, which could allow it to insulate ice bodies such as comets in space.

Saunders, R. S.↗

Transformation of Polar Ice Sublimate Residue into Martian Circumpolar Sand

The experimental demonstration that a credible Martian sand may be formed from dust-bearing ice provides a new set of possible explanations for some of the observed Martian aeolian landforms. It is hypothesized that a light-weight fluffy rind is formed on the polar caps. This could provide material easily entrainable by Martian winds, which generally blow equatorward from the poles. These winds would peel the fluffy rind from the surface of the sublimating summer polar caps and from the equatorward slopes of the polar troughs. These pieces of material would then be rolled into lumps (of high sailarea/mass ratio) by the wind. They would become pigmented as they saltate across the surface, perhaps gathering carbonaceous meteoritic dust or other impurities on their surfaces, or through chemical reactions with the ice-free environment away from their point of origin. Once they became trapped in topographic wind shadows, they would form dune structures because they are hydraulically equivalent to sand particles.

Saunders, R. S.↗

Geomorphology and Geology of the Southwestern Margaritifer Sinus and Argyre Regions of Mars. Part 1: Geological and Geomorphological Overview

Based upon Viking Orbiter 1 images of the southwestern portion of the Margaritifer Sinus Quadrangle, the northwestern portion of the Argyre Quadrangle, and a small portion of the southeastern Coprates Quadrangle, three major mountainous of plateau units, seven plains units, and six units related to valley forming processes were identified. The photomosaic is oriented such that it provides good areal coverage of the upper Chryse Trough from Argyre Planitia to just above Margaritifer Chaos as well as of plains units on either side of the Trough. The photomosaic was compiled from Viking Orbiter 1 images ranging in resolution from approximately 150 to 300 meters per pixel printed at a scale of about 1:2,000,000. The characteristics of each geomorphic unit are outlined.

Parker, T. J.↗

Geomorphology and Geology of the Southwestern Margaritifer Sinus and Argyre Regions of Mars. Part 2: Crater Size-frequency Distribution Curves and Geomorphic Unit Ages

In assessing the relative ages of the geomorphic/geologic units, crater counts of the entire unit or nearly the entire unit were made and summed in order to get a more accurate value than obtainable by counts of isolated sections of each unit. Cumulative size-frequency counts show some interesting relationships. Most of the units show two distinct crater populations with a flattening out of the distribution curve at and below 10 km diameter craters. Above this crater size the curves for the different units diverge most notably. In general, the variance may reflect the relative ages of these units. At times, however, in the larger crater size range, these curves can overlap and cross on another. Also the error bars at these larger sizes are broader (and thus more suspect), since counts of larger craters show more scatter, whereas the unit areas remain constant. Occasional clusters of relatively large craters within a given unit, particularly one of limited areal extent, can affect the curve so that the unit might seem to be older than units which it overlies or cuts.

Parker, T. J.↗