Partridge, Jr., William P.

DOE OSTI2022

Development of A Multi-Spectral Pyrometry Sensor for High-Speed Transient Surface-Temperature Measurements in Combustion-Relevant Harsh Environments

Accurate and high-speed transient surface-temperature measurements of combustion devices including internal combustion (IC) engines, gas turbines, etc., provide validation targets and boundary conditions for computational fluid dynamics models, and are broadly relevant to technology advancements such as performance improvement and emissions reduction. Development and demonstration of a multi-infrared-channel pyrometry-based optical instrument for high-speed surface-temperature measurement is described. The measurement principle is based on multi-spectral radiation thermometry (MRT) and uses surface thermal radiation at four discrete spectral regions and a corresponding emissivity model to obtain surface temperature via non-linear least squares (NLLS) optimization. Rules of thumb for specifying the spectral regions and considerations to avoid interference with common combustion products are developed; the impact of these along with linear and non-linear MRT analysis are assessed as a function of temperature and signal-to-noise ratio. A multi-start method to determine the MRT-solution global optimum is described and demonstrated. The resulting multi-channel transient pyrometry instrument is described along with practical considerations including optical-alignment drift, matching intra-channel transient response, and solution-confidence indicators. The instrument demonstrated excellent >97% accuracy and >99% 2-sigma precision over the 400–800 °C range, with ~20 µs (50 kHz, equivalent to 0.2 cad at 2000 RPM IC-engine operation) transient response in the bench validation.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

A Transient-Response methodology based on experiments and modeling for Cu-Redox Half-Cycle kinetic analysis on a Cu-SSZ-13 SCR catalyst

In this report the Standard SCR reaction catalyzed by Cu-SSZ-13 is a redox process consisting of a reduction half cycle (RHC) and an oxidation half cycle (OHC) that cycle the active Cu sites between the Cu(II) and Cu(I) states. In the current work, a transient-response methodology consisting of experimental transient response Cu-redox (TRCR) measurements and kinetic modeling was developed for detailed study of individual SCR Cu-redox half cycles. The TRCR protocol allows quantification of the reducible Cu density, Cu(II)-Cu(I) partitioning, relative native RHC and OHC rates, and limiting half cycle during SCR. The half-cycle kinetics are studied over a wide (170–450 °C) temperature, and in differential segments along the catalyst length using spatially resolved capillary inlet mass-spectrometry (SpaciMS). The protocol alone provides two independent measures indicating that OHC increases faster than RHC with temperature, and that at all but the lowest temperature SCR is RHC limited. Introducing the transient kinetic models allows half-cycle reaction pathways, orders and activation energies to be studied and determined; e.g., RHC involves surface and gas-phase NH 3 routes, and OHC with O 2 involves dimer formation. Application of the full methodology provides further confirmation and quantification of the protocol conclusions, and specifically the first measurements of RHC and OHC activation energies; specifically for parallel RHC surface and gas-phase routes, and experimentally obtained OHC activation energy vs. first-principle calculations in the literature. Beyond insights related to the degreened catalyst studied here, the methodology provides a broadly available approach for quantifying how aging processes selectively impact RHC and OHC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗