Engineering topics

Passian, Ali

Publications and source records attributed to Passian, Ali.

At least 19 records

DOE OSTI2023

Edge-computing with enhanced standoff sensors

A system senses analytes through one or more sensors that detect or measure a physical characteristic. The one or more sensor generate a spectroscopic-data signal corresponding to the detection. An edge device communicatively couples the one or more sensors that communicatively couples a wide-area network coupling a cloud service. The edge device includes a data acquisition device that receives spectroscopic data signals from the one or more sensor and a processor that processes the spectroscopic-data signals to identify an analyte. The edge device also includes a transceiver that transmits data identifying the analytes to the cloud service.

Passian, Ali↗

DOE OSTI2023

Quantum Key Distribution for Critical Infrastructures: Towards Cyber-Physical Security for Hydropower and Dams

Hydropower facilities are often remotely monitored or controlled from a centralized remote control room. Additionally, major component manufacturers monitor the performance of installed components, increasingly via public communication infrastructures. While these communications enable efficiencies and increased reliability, they also expand the cyber-attack surface. Communications may use the internet to remote control a facility’s control systems, or it may involve sending control commands over a network from a control room to a machine. The content could be encrypted and decrypted using a public key to protect the communicated information. These cryptographic encoding and decoding schemes become vulnerable as more advances are made in computer technologies, such as quantum computing. In contrast, quantum key distribution (QKD) and other quantum cryptographic protocols are not based upon a computational problem, and offer an alternative to symmetric cryptography in some scenarios. Although the underlying mechanism of quantum cryptogrpahic protocols such as QKD ensure that any attempt by an adversary to observe the quantum part of the protocol will result in a detectable signature as an increased error rate, potentially even preventing key generation, it serves as a warning for further investigation. In QKD, when the error rate is low enough and enough photons have been detected, a shared private key can be generated known only to the sender and receiver. We describe how this novel technology and its several modalities could benefit the critical infrastructures of dams or hydropower facilities. The presented discussions may be viewed as a precursor to a quantum cybersecurity roadmap for the identification of relevant threats and mitigation.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Ultrasensitive Photothermal Spectroscopy: Harnessing the Seebeck Effect for Attogram-Level Detection

Molecular-level spectroscopy is crucial for sensing and imaging applications, yet detecting and quantifying minuscule quantities of chemicals remain a challenge, especially when they surface adsorb in low numbers. Here, we introduce a photothermal spectroscopic technique that enables the high selectivity sensing of adsorbates with an attogram detection limit. Our approach utilizes the Seebeck effect in a microfabricated nanoscale thermocouple junction, incorporated into the apex of a microcantilever. We observe minimal thermal mass exhibited by the sensor, which maintains exceptional thermal insulation. The temperature variation driving the thermoelectric junction arises from the nonradiative decay of molecular adsorbates’ vibrational states on the tip. We demonstrate the detection of photothermal spectra of physisorbed trinitrotoluene (TNT) and dimethyl methylphosphonate (DMMP) molecules, as well as representative polymers, with an estimated mass of 10 -18 g.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Imaging beyond the surface region: Probing hidden materials via atomic force microscopy

Probing material properties at surfaces down to the single-particle scale of atoms and molecules has been achieved, but high-resolution subsurface imaging remains a nanometrology challenge due to electromagnetic and acoustic dispersion and diffraction. The atomically sharp probe used in scanning probe microscopy (SPM) has broken these limits at surfaces. Subsurface imaging is possible under certain physical, chemical, electrical, and thermal gradients present in the material. Of all the SPM techniques, atomic force microscopy has entertained unique opportunities for nondestructive and label-free measurements. Here, we explore the physics of the subsurface imaging problem and the emerging solutions that offer exceptional potential for visualization. We discuss materials science, electronics, biology, polymer and composite sciences, and emerging quantum sensing and quantum bio-imaging applications. The perspectives and prospects of subsurface techniques are presented to stimulate further work toward enabling noninvasive high spatial and spectral resolution investigation of materials including meta- and quantum materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2023

Classical and quantum compression for edge computing: the ubiquitous data dimensionality reduction

Edge computing aims to address the challenges associated with communicating and transferring large amounts of data generated remotely to a data center in a timely and efficient manner. A central pillar of edge computing is local (i.e., at- or near-source) data processing capability so that data transfer to a data center for processing can be minimized. Data compression at the edge is therefore a natural component of edge workflows. Here we present a survey of data compression algorithms with a focus on edge computing. Not all compression algorithms can accommodate the data type heterogeneity, tight processing and communication time constraints, or energy efficiency requirement characteristics of edge computing. We discuss specific examples of compression algorithms that are being explored in the context of edge computing. We end our review with a brief survey of emerging quantum compression techniques that are of importance in quantum information processing, including the proposed concept of quantum edge computing.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

The Concept of a Quantum Edge Simulator: Edge Computing and Sensing in the Quantum Era

Sensors, enabling observations across vast spatial, spectral, and temporal scales, are major data generators for information technology (IT). Processing, storing, and communicating this ever-growing amount of data pose challenges for the current IT infrastructure. Edge computing—an emerging paradigm to overcome the shortcomings of cloud-based computing—could address these challenges. Furthermore, emerging technologies such as quantum computing, quantum sensing, and quantum communications have the potential to fill the performance gaps left by their classical counterparts. Here, we present the concept of an edge quantum computing (EQC) simulator—a platform for designing the next generation of edge computing applications. An EQC simulator is envisioned to integrate elements from both quantum technologies and edge computing to allow studies of quantum edge applications. The presented concept is motivated by the increasing demand for more sensitive and precise sensors that can operate faster at lower power consumption, generating both larger and denser datasets. These demands may be fulfilled with edge quantum sensor networks. Envisioning the EQC era, we present our view on how such a scenario may be amenable to quantification and design. Given the cost and complexity of quantum systems, constructing physical prototypes to explore design and optimization spaces is not sustainable, necessitating EQC infrastructure and component simulators to aid in co-design. We discuss what such a simulator may entail and possible use cases that invoke quantum computing at the edge integrated with new sensor infrastructures.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

Stealthy Cyber Anomaly Detection On Large Noisy Multi-material 3D Printer Datasets Using Probabilistic Models

As Additive Layer Manufacturing (ALM) becomes pervasive in industry, its applications in safety critical component manufacturing are being explored and adopted. However, ALM's reliance on embedded computing renders it vulnerable to tampering through cyber-attacks. Sensor instrumentation of ALM devices allows for rigorous process and security monitoring, but also results in a massive volume of noisy data for each run. As such, in-situ, near-real-time anomaly detection is very challenging. The ideal algorithm for this context is simple, computationally efficient, minimizes false positives, and is accurate enough to resolve small deviations. In this paper, we present a probabilistic-model-based approach to address this challenge. To test our approach, we analyze current measurements from a polymer composite 3D printer during emulated tampering attacks. Our results show that our approach can consistently and efficiently locate small changes in the presence of substantial operational noise.

Yoginath, Srikanth↗

DOE OSTI2022

Heartbeat: Detecting Malware by Periodic Power Signal Injection and Monitoring

Rootkits and other stealthy malware attempt to conceal their presence on a computer by making changes to the host computer’s operating environment. ORNL’s Heartbeat technology detects these changes, and thus the malware itself. Heartbeat operates by directly monitoring the DC power consumption of the computer while a set of operations, the “heartbeat,” is executed periodically. These operations exercise parts of the operating system that are common targets of malware tampering. The power consumption during these heartbeat events is monitored and then compared to a previously learned baseline, with any significant deviation detected and analyzed. This technology has been tested and validated in a laboratory environment, and ORNL is currently seeking a deployment partner to allow for further in-context development and testing of this technology.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Bayesian Estimation of Oscillator Parameters: Toward Anomaly Detection and Cyber-Physical System Security

Cyber-physical system security presents unique challenges to conventional measurement science and technology. Anomaly detection in software-assisted physical systems, such as those employed in additive manufacturing or in DNA synthesis, is often hampered by the limited available parameter space of the underlying mechanism that is transducing the anomaly. As a result, the formulation of anomaly detection for such systems often leads to inverse or ill-posed problems, requiring statistical treatments. Here, we present Bayesian inference of unknown parameters associated with a generic actuator considered as a representative vital element of a cyber-physical system. Via a series of experimental input-output measurements, a transfer function for the actuator is obtained numerically, which serves as our model for the proposed method. Linear, nonlinear, and delayed dynamics may be assumed for the actuator response. By devising a code-based malicious signal, we study the efficacy of Bayesian inference for its potential to produce a detection, including uncertainty quantification, with a remarkably small number of input data points. Our approach should be adaptable to a variety of real-time cyber-physical anomaly detection scenarios.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

A Bayesian approach to nanoparticle characterization

We introduce and numerically validate a Bayesian method for plasmonic nanometrology. Applicable to any system described by a scattering cross section, our approach quantifies uncertainty automatically and enables model comparison through Bayes factors.

Lukens, Joseph↗

DOE OSTI2021

Semicomputational calculation of Bragg shift in stratified materials

The fiber Bragg grating (FBG) may be viewed as a one dimensional photonic band-gap crystal by virtue of the periodic spatial perturbation imposed on the fiber core dielectric material. Similar to media supporting Bloch waves, the engraved weak index modulation, presenting a periodic “potential” to an incoming guided mode photon of the fiber, yields useful spectral properties that have been the basis for sensing applications and emerging quantum squeezing and solitons. The response of an FBG sensor to arbitrary external stimuli represents a multiphysics problem without a known analytical solution despite the growing use of FBGs in classical and quantum sensing and metrology. Here, we study this problem by first presenting a solid mechanics model for the thermal and elastic states of a stratified material. Additionally, the model considers an embedded optical material domain that represents the Bragg grating, here in the form of an FBG. Using the output of this model, we then compute the optical modes and their temperature- and stress-induced behavior. The developed model is applicable to media of arbitrary shape and composition, including soft matter and materials with nonlinear elasticity and geometric nonlinearity. Finally, we employ the computed surface stress and temperature distributions along the grating to analytically calculate the Bragg shift, which is found to be in reasonable agreement with our experimental measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Bayesian inference for plasmonic nanometrology

Here, we introduce a Bayesian method for the characterization of plasmonic nanoparticles, which is applicable to both near- and far-field problems. Designed to combine data generated from any photon-plasmon interaction experiment with physically motivated theoretical models, our approach leverages state-of-the-art Markov chain Monte Carlo sampling techniques and returns parameter estimates on nanometric scales. Simulated spectral data sets, describing resonant scattering of photons from ellipsoidal and toroidal nanoparticles, are explored as concrete examples of our approach, with the resulting Bayesian estimates showing excellent agreement with the ground truth, even under conditions of high statistical noise. By incorporating Bayes factors into the method as well, we reveal how model selection can determine which one of competing geometric shapes better explains the observed data. Our comprehensive nanometrology procedure can be tailored to a variety of light-particle interaction models, and its reliance on Bayesian inference furnishes automatic uncertainty quantification. In addition to applicability to a host of plasmonic configurations such as nanoparticle dimers, trimers, and array studies, it is proposed that the presented analysis can be extended to the quantum regime, where nonclassical photon statistics may provide additional insight for inference of scatterer properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Atomic Force Microscopy and Infrared Nanospectroscopy of COVID-19 Spike Protein for the Quantification of Adhesion to Common Surfaces

The COVID-19 pandemic has claimed millions of lives worldwide, sickened many more, and has resulted in severe socio-economic consequences. As society returns to normal, understanding the spread and persistence of SARS CoV-2 on commonplace surfaces can help to mitigate future outbreaks of coronaviruses and other pathogens. We hypothesize that such an understanding can be aided from studying the binding and interaction of viral proteins with non-biological surfaces. Here, we propose a methodology for investigating the adhesion of the SARS CoV-2 spike glycoprotein on common inorganic surfaces such as aluminum-, copper-, iron-, silica-, and ceria-oxides as well as metallic gold. Quantitative adhesion was obtained from the analysis of measured forces at the nanoscale using an atomic force microscope operated under ambient conditions. Without imposing further constraints on the measurement conditions, our preliminary findings suggest that spike glycoproteins interact with similar adhesion forces across the majority of the metal oxides tested with the exception to gold, for which attraction forces ~10 times stronger than all other materials studied were observed. Ferritin, which was used as a reference protein, was found to exhibit similar adhesion forces as SARS CoV-2 spike protein. Further, this study results show that glycoprotein adhesion forces for similar ambient humidity, tip shape, and contact surface are non-specific to the properties of metal oxide surfaces, which are expected to be covered by a thin water film. The findings suggest that at ambient conditions glycoprotein adhesion to metal oxides is primarily controlled by the water capillary forces and they depend on the surface tension of the liquid (water). We discuss further strategies warranted to decipher the intricate nanoscale forces for improved quantification of the adhesion.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Rootkit detection system

A system and method (referred to as the system) detect infectious code. The system injects a repetitive software code that causes malware in a monitored device to render a detectable direct current power consumption profile. A guide wave generator generates a guide wave signal that establishes an observational window that is applied to data that represent a direct current source power consumption of the monitored device. An extraction device extracts a portion of the data that represent the direct current source power consumption of the monitored device. A deviation engine identifies the malware on the monitored device without processing data associated with a prior identification of the malware or identifying a source of the malware or identifying a location of the malware on the monitored device.

Dawson, Joel↗

DOE OSTI2021

In situ plant materials hyperspectral imaging by multimodal scattering near-field optical microscopy

Plant cells are elaborate three-dimensional polymer nano-constructs with complex chemistry. The bulk response of plants to light, in the far-field, is ultimately encoded by optical scattering from these nano-constructs. Their chemical and physical properties may be acquired through their interaction with a modulated nano-tip using scattering scanning near-field optical microscopy. Here, using this technique, we present 20 nm spatial resolution mechanical, spectral and optical mappings of plant cell walls. We first address the problem of plant polymers tracking through pretreatment and processing. Specifically, cellulose and lignin footprints are traced within a set of delignified specimen, establishing the factors hindering complete removal of lignin, an important industrial polymer. Furthermore, we determine the frequency dependent dielectric function ${\epsilon }(\omega)={(n+ik)}^{2}$ of plant material in the range 28 ≤ ω ≤ 58 THz, and show how the environmental chemical variation is imprinted in the nanoscale variability of n and k . This nanometrology is a promise for further progress in the development of plant-based (meta-)materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Control-Theory-Informed Feature Selection for Detecting Malicious Tampering in Additive Layer Manufacturing Processes

Additive layer manufacturing (ALM) is rapidly becoming an appealing solution to the low-volume manufacturing of metal, polymer, or composite parts. However, ALM’s reliance on digital part specifications, microcontrollers, and modern networking makes these devices vulnerable to malicious tampering by cyber attackers, which can negatively affect part performance and even result in catastrophic failure. We present a hybrid analytic approach to feature discovery using control theoretic techniques and linear modelling on input-output data collected from a representative controller system. Employing this approach, we design, train, and test an anomaly detection system. The preliminary results show that the proposed approach effectively discovers useful input-output relationships for anomaly detection in a simulated ALM process. Application to larger and more complex systems are discussed.

Dawson, Joel↗

DOE OSTI2020

Surface plasmon enhanced fast electron emission from metallised fibre optic nanotips

Physical mechanisms of electron emission from fibre optic nanotips, namely, tunnelling, multi-photon, and thermionic emission, either prevent fast switching or require intense laser fields. Time-resolved electron emission from nano-sized sources finds applications ranging from material characterisation to fundamental studies of quantum coherence. We present a nano-sized electron source capable of fast-switching (≤1 ns) that can be driven with low-power femtosecond lasers. The physical mechanism that can explain emission at low laser power is surface plasmon enhanced above-threshold photoemission. An electron emission peak is observed and provides support for resonant plasmonic excitation. The electron source is a metal-coated optical fibre tapered into a nano-sized tip. The fibre is flexible and back illuminated facilitating ease of positioning. The source operates with a few nJ per laser pulse, making this a versatile emitter that enables nanometrology, multisource electron-lithography and scanning probe microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

Photofield electron emission from an optical fiber nanotip

In this work, we demonstrate a nanotip electron source based on a graded index multimode silica optical fiber, tapered at one end to a radius of curvature r ~50 nm and coated with a thin film of gold. We report observation of laser-induced electron photoemission at tip bias potentials below the onset of dark field emission. Single-photon photofield emission is identified as the emission mechanism that exhibits fast switching times with an upper limit on the order of 1 μ s. The explored fiber optic nanotips are flexible back-illuminated emitters, which can be operated in continuous wave and pulsed modes using lasers with photon energies in the visible range or higher. The mechanical flexibility of the source can facilitate externally controlled positioning. Multiple, individually addressable, nanotips may be assembled into a bundle for applications such as computational electron ghost imaging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗