Search NASA⌕ Search

Engineering topics

Pastore, Giovanni

Publications and source records attributed to Pastore, Giovanni.

At least 37 records · Page 2

Coupled fuel performance calculations in VERA and demonstration on Watts Bar unit 1, cycle 1

As the core simulator capabilities in the Virtual Environment for Reactor Applications (VERA) have become more mature and stable, increased attention has been focused on coupling Bison to provide fuel performance simulations. This technique has been a very important driver for the pellet-clad interaction challenge problem being addressed by the Consortium for Advanced Simulation of Light Water Reactors (CASL). Here, two coupling approaches are demonstrated on quarter core problems based on Watts Bar Nuclear Plant Unit 1, Cycle 1: (1) an inline approach in which a one-way coupling is used between neutronics/thermal hydraulics (through MPACT/CTF) and fuel performance (through Bison) but no fuel temperature information is passed back to MPACT/CTF, and (2) a two-way approach (coupled) in which the fuel temperature is passed from Bison to MPACT/CTF. In both approaches, power and temperature distributions from MPACT/CTF are used to inform the Bison simulations for each rod in the core.The demonstrations presented here are the first integrated fuel performance simulations in VERA, which opens many possibilities for future work, including applications to accident-tolerant fuel efforts and transient simulations, which are of critical importance to CASL. These demonstrations also highlight the potential to move away from the current Bison-informed fuel temperature lookup table approach, which is the default in MPACT/CTF simulations, if performance improvements are made in the near future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling of gap conductance for LWR fuel rods applied in the BISON code

A new gap conductance model is proposed in this study as a combination of Toptan’s model and the Ross-Stoute model. A variance-based sensitivity analysis is performed to understand how simulation results depend on all input parameters of the proposed model. Additionally, new modeling options (e.g. fill gas thermal conductivity, temperature jump distance, thermal accommodation coefficient, etc.) are added into the nuclear fuel performance code, BISON. The need for further investigation of the gap heat transfer between fuel and cladding in BISON motivated this study to evaluate its impact on the code’s predictions. New gap conductance modeling is proposed. A series of integral-effects validation tests is performed: (1) to demonstrate the impact of the proposed model on the code’s fuel temperature predictions at the beginning of life and through the reactor’s life; (2) to ensure that the proposed model is capable of accurately modeling gap heat transfer characteristics in real-world problems; and (3) to investigate the impact of the estimation of fission gas release on the fuel temperature predictions with the proposed model. Overall, the results indicate that the proposed gap conductance model improves BISON’s predictions.

42 ENGINEERING↗

BISON capability and validation for U3Si2, Cr2O3-doped UO2, FeCrAl, and Cr-coated Zircaloy ATF concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the BISON fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on, the focus was on U3Si2 fuel and FeCrAl cladding as part of a high-impact problem through the Nuclear Energy and Advanced Model- ing Simulation program [1]. Then, developments for Cr2O3- doped UO2 fuel, as well as SiC-SiC and Cr-coated Zircaloy cladding began based upon industry interests. Near the end of fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors took over further Accident Tolerant Fuel (ATF) work in BISON in support of Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC clarified their list of priority fuel and cladding concepts, which included Cr2O3-doped UO2 and U3Si2 fuels, as well as Cr-coated Zircaloy and FeCrAl claddings. Further, reports similar in form to NUREG/CR-7024 [2] that was developed for traditional light water reactor (LWR) materials, UO2 fuel with Zircaloy claddings were created for the priority fuel and cladding concepts. In this paper select details from the reports entitled "ATF material model development and validation for priority fuel concepts" [3] and "ATF material model development and validation for priority cladding concepts" [4] are presented. First, a brief overview of the available models and their associated uncertainty are provided for the priority fuel and cladding concepts. Then, for the concepts with experimental data, comparisons between simulation and experiment are shown taking into account forward uncertainty quantification (UQ) techniques. For the concepts without publicly available experimental data, parametric studies incorporating forward UQ are completed to verify claims made about the materials’ behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

M3MS-19IN0101201 Modeling Intra-granular Fission Gas Bubble Evolution in Uranium Dioxide during Transients

The SciDAC milestone M3MS-19IN0101201 on Modeling Intra-granular Fission Gas Bubble Evolution in Uranium Dioxide during Transients was completed with the development, testing and implementation in the Bison code of an engineering model for intra-granular fission gas bubble evolution that is applicable to transient conditions. The model extends the previous work on modeling bubble evolution during normal operating conditions to include additional complexity that arises during transient situations, in particular, the so-called intra-granular bubble coarsening. This phenomenon refers to the appearance of a second population of coarsened bubbles with diameters of tens to hundreds of nm, which co-exist with nanometric bubbles present also during normal operating conditions and are responsible for a large portion of transient fuel swelling. The developed model considers growth of bubbles along dislocations, associated with the absorption of vacancies available in the dislocation core region, and favored by pipe diffusion of fission gas atoms. The model also utilizes the formulation for the gas atom resolution rate developed in the present SciDAC project through molecular dynamics simulations by other institutions. The present work therefore demonstrates an operational multiscale approach, based on collaboration within the project. The model is validated to an extensive experimental dataset of ramp tested uranium dioxide fuel samples. Additionally, we present new applications of the base model for bubble evolution during normal operating conditions to Bison engineering simulations of Cr2O3-doped fuel rods irradiated in the Halden reactor. Simulation results in terms of integral fission gas release in the fuel rods are compared to the available experimental data, pointing out significant improvements in the engineering predictions compared to application of the empirical model that was available in Bison before the SciDAC developments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Summary of Bison milestones and activities - NEAMS FY2019 Report

This summary report contains an overview of work performed under the work package entitled “FY2019 NEAMS Engineering Scale Fuel Performance”, which is focused on the development and support of the fuel performance code Bison [1]. The second chapter lists FY19 milestones titles, completion schedule, and milestone level. Subsequent chapters summarize and demonstrate completion of milestones and activities. The last chapter outlines FY20 proposed future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ATF material model development and validation for priority fuel concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the Bison fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on the focus was on U 3 Si 2 fuel and FeCrAl cladding as part of a high impact problem through the Nuclear Energy and Advanced Modeling Simulation (NEAMS) program. Then, developments for Cr 2 O 3 -doped UO 2 fuel, and SiC-SiC and Cr-coated zirconium-based claddings began based upon industry interests. In late fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors (CASL) took over further ATF work in Bison in support of the Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC identified their list of priority fuel and cladding concepts, which included Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and Cr-coated zirconium-based and FeCrAl claddings. In particular, the NRC suggested that reports similar in form to NUREG/CR-7024 [1] that was developed for traditional LWR materials UO 2 and zirconium-based claddings (i.e., Zircaloy-4, M5®, ZIRLO) be created for the priority ATF concepts. The approach to ATF capability development in Bison since the beginning has been two-fold: (1) empirical correlations and (2) multiscale model development. Both approaches have uncertainty inherent to them. Uncertainty in empirical correlations is bounded by the experimental data upon which with the correlation was developed. Models developed through a multiscale approach have uncertainty associated with the lower length scale calculations and input parameters that must be propagated to the engineering scale model in Bison. In this report, the recommended models, their range of applicability (e.g., temperature, burnup), and associated uncertainty for the NRC priority fuel concepts Cr 2 O 3 -doped UO 2 and U 3 Si 2 are presented in a manner similar to the aforementioned NUREG. In addition, the Cr 2 O 3 -doped UO 2 models are validated to the Halden Reactor tess IFA-677.1 rods 1 and 5 and IFA-716.1 rod 1. For U 3 Si 2 the models are validated to the recent post-irradiation examination (PIE) data ATF-13 and ATF-15 rods that were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory. Finally, an uncertainty quantification (UQ) and sensitivity analysis (SA) is completed on a single rod for each fuel concept that takes into account the defined uncertainty in select models. The results of the UQ and SA analyses indicate that given the large uncertainty in some of the input ATF models that the uncertainty on the Bison predictions of fuel performance metrics of interest bound the available experimental data. Correlation coefficients are also reported that identified the uncertain inputs with the strongest correlation (positive or negative) with the outputs of interest. Fuel performance metrics investigated include fuel elongation, rod internal pressure, fuel centerline temperature, and fission gas release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling of Fission Gas Behavior in Uranium Oxide Nuclear Fuel Applied to Engineering Fuel Performance Codes

This presentation provides an update on the I-NERI project 2017-004-E between INL and JRC-Karlsruhe (European Commission). I-NERI is a collaboration initiative between the European institutions and the US DOE which favors collaborative work. INL is involved in multiple INERI projects, principally on the experimental side but also on the modeling side with this project, which focuses on fission gas modeling. This year's I-NERI meeting is in the USA (LLNL) and G. Pastore, who is the US PI for this, will provide the update. The project has led to fission gas developments that are being applied in the Bison code and strengthened collaborations of INL in this area with JRC and POLIMI.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advancing Understanding of Fission Gas Behavior in Nuclear Fuel through Leadership Class Computing

This report describes the outcome of the pilot SciDAC project jointly funded by the DOE Office of Nuclear Energy and the DOE Office of Science, Advanced Scientific Computing Research to advance understanding of fission gas behavior in nuclear fuel. The computational approach involved utilizing both a bottom up and top down multiscale materials modeling to evaluate the processes of xenon fission gas diffusion, xenon clustering and precipitation and the mechanisms of fission gas resolution by energetic fission fragments in uranium dioxide nuclear fuel. The computer science and applied mathematics research activities were focused on optimizing the uranium – oxygen – xenon interatomic potential implementation in the LAMMPS molecular dynamics code for large-scale simulations of fission gas resolution, in addition to improvements in visualization of accelerated molecular dynamics simulations and performance optimization of the Xolotl continuum cluster dynamics with a new grouping scheme to reduce the computational cost of modeling very large fission gas bubbles containing more than 10,000 xenon atoms. The most impactful result from this project stems from a systematic series of atomistic molecular dynamics to evaluate fission gas resolution from xenon bubbles that, combined with the fission product yields and consideration of electron-phonon coupling, informed a first principles model that predicts the magnitude of fission gas resolution in good agreement with empirical estimates.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multiscale modeling of fission gas behavior in U 3 Si 2 under LWR conditions

In this work, we present a model of fission gas behavior in U 3 Si 2 under light water reactor (LWR) conditions for application in engineering fuel performance codes. The model includes components for intra-granular and inter-granular behavior of fission gases. The intra-granular component is based on cluster dynamics and computes the evolution of intra-granular fission gas bubbles and swelling coupled to gas diffusion to grain boundaries. The inter-granular component describes the evolution of grain-boundary fission gas bubbles coupled to fission gas release. Given the lack of experimental data for U 3 Si 2 under LWR conditions, the model is informed with parameters calculated via atomistic simulations. In particular, we derive fission gas diffusivities through density functional theory calculations, and the re-solution rate of fission gas atoms from intra-granular bubbles through binary collision approximation calculations. Further, the developed model is applied to the simulation of an experiment for U 3 Si 2 irradiated under LWR conditions available from the literature. Results point out a credible representation of fission gas swelling and release in U 3 Si 2 . Finally, we perform a sensitivity analysis for the various model parameters. Based on the sensitivity analysis, indications are derived that can help in addressing future research on the characterization of the physical parameters relative to fission gas behavior in U 3 Si 2 . The developed model is intended to provide a suitable infrastructure for the engineering scale calculation of fission gas behavior in U 3 Si 2 that exploits a multiscale approach to fill the experimental data gap and can be progressively improved as new lower-length scale calculations and validation data become available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An effective numerical algorithm for intra-granular fission gas release during non-equilibrium trapping and resolution

Both fission gas release and gaseous swelling in nuclear fuel are driven by the transport of fission gas from within the fuel grains to grain boundaries (intra-granular fission gas release). The process involves gas atom diffusion in conjunction with trapping in and resolution from intra-granular bubbles, and is described mathematically by a system of two partial differential equations (PDE). Following Speight, under the assumption of equilibrium between trapping and resolution (quasi-stationary approximation) the system can be reduced to a single diffusion equation with an effective diffusion coefficient. Numerical solutions used in engineering fuel performance calculations invariably rely on this simplification. First, we investigate the validity of the quasi-stationary approximation compared to the solution of the general system of PDEs. Results demonstrate that the approximation is valid under most conditions of practical interest, but is inadequate to model intra-granular fission gas release during rapid transients to relatively high temperatures such as postulated reactivity initiated accidents (RIA). Then, we develop a novel numerical algorithm for the solution of the general problem in time-varying conditions. We verify the PolyPole-2 algorithm against a reference finite difference solution for a large number of randomly generated operation histories including prototypical RIA transients. Results demonstrate that PolyPole-2 captures the solution of the general PDE system with a high accuracy and a low computational cost. As a result, the PolyPole-2 algorithm overcomes the quasi-stationary approximation and the concept of an effective diffusion coefficient for the solution of the intra-granular fission gas release problem in nuclear fuel analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling of Cr 2 O 3 -doped UO 2 as a near-term accident tolerant fuel for LWRs using the BISON code

The near-term Accident Tolerant Fuel (ATF) concepts consist of minor modifications of the standard UO 2 -Zr fuel rod materials to provide enhanced accident tolerance. Uranium dioxide fuel with chromia dopant, developed by AREVA, is of interest in view of its enhanced fission gas retention. The predictive capability of the BISON fuel performance code for chromia-doped UO 2 fuel is assessed through simulation of the Halden IFA-677.1 fuel rod experiment. A sensitivity analysis is conducted to interpret the deviation of code’s predictions from the experimental data. A power ramp test is also modeled with BISON and calculations are compared to the experimental database. Finally, a large-break LOCA (LBLOCA) case is simulated with BISON, leading to an initial assessment of the enhanced safety associated with chromia-doped fuel compared to the standard UO 2 fuel in LWRs

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Unit mechanisms of fission gas release: Current understanding and future needs

Gaseous fission product transport and release has a large impact on fuel performance, degrading fuel properties and, once the gas is released into the gap between the fuel and cladding, lowering gap thermal conductivity and increasing gap pressure. While gaseous fission product behavior has been investigated with bulk reactor experiments and simplified analytical models, recent improvements in experimental and modeling approaches at the atomistic and mesoscales are being applied to provide unprecedented understanding of the unit mechanisms that define the fission product behavior. In this article, existing research on the basic mechanisms behind the various stages of fission gas release during normal reactor operation are summarized and critical areas where experimental and simulation work is needed are identified. This basic understanding of the fission gas behavior mechanisms has the potential to revolutionize our ability to predict fission product behavior during reactor operation and to design fuels that have improved fission product retention. In addition, this work can serve as a model on how a coupled experimental and modeling approach can be applied to understand the unit mechanisms behind other critical behaviors in reactor materials.

computer simulation↗

INL/US DOE Participation in the Coordinated Research Project FUMAC: Final Report

This report summarizes the contribution of Idaho National laboratory (INL) to the IAEA Co- ordinated Research Project on Fuel Modeling under Accident Conditions FUMAC. In line with the original research agreement bewtween INL and IAEA, work at INL has focused on both (i) developments of INL’s fuel performance code BISON for the analysis of loss-of-coolant accidents (LOCA) and (ii) simulation of selected FUMAC priority cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗