Engineering topics

Patankar, Suhas V.

Publications and source records attributed to Patankar, Suhas V..

12 records

NASA NTRS1993

Radiation heat transfer calculations using a control-angle, control-volume-based discrete ordinates method

A control-angle, control-volume-based discrete ordinates method (CA - CV DOM) is presented in this paper. A detailed formulation of the discretization equation is presented in two-dimensional Cartesian coordinate system. The procedure can be extended to curvilinear coordinate system with minor modifications. The step and modified-exponential schemes are used in this study. Present results converged to the grid independent solutions quickly and compared favorably against other published results for six test problems.

Chai, John C.↗

NASA NTRS1993

An evaluation of three spatial differencing schemes for the discrete ordinates method in participating media

Three popular spatial differencing schemes for the discrete ordinates method are examined for two-dimensional Cartesian coordinates system. These are a positive, the step, and the diamond schemes. Contrary to the common belief that negative intensities will not occur when fine spatial discretization is used with the diamond scheme, under certain conditions, the diamond scheme will produce negative intensities irrespective of the number of control volums employed. The positive scheme can produce physically unrealistic trends. The diamond and positive schemes are also capable of producing physically unrealistic overshoots. In absorbing-emitting or absorbing-emitting-scattering media, grid refinement can result in negative intensities when the diamond or positive scheme is used.

Chai, John C.↗

NASA NTRS1988

Two-Equation Low-Reynolds-Number Turbulence Modeling of Transitional Boundary Layer Flows Characteristic of Gas Turbine Blades

The use of low Reynolds number (LRN) forms of the k-epsilon turbulence model in predicting transitional boundary layer flow characteristic of gas turbine blades is developed. The research presented consists of: (1) an evaluation of two existing models; (2) the development of a modification to current LRN models; and (3) the extensive testing of the proposed model against experimental data. The prediction characteristics and capabilities of the Jones-Launder (1972) and Lam-Bremhorst (1981) LRN k-epsilon models are evaluated with respect to the prediction of transition on flat plates. Next, the mechanism by which the models simulate transition is considered and the need for additional constraints is discussed. Finally, the transition predictions of a new model are compared with a wide range of different experiments, including transitional flows with free-stream turbulence under conditions of flat plate constant velocity, flat plate constant acceleration, flat plate but strongly variable acceleration, and flow around turbine blade test cascades. In general, calculational procedure yields good agreement with most of the experiments.

Schmidt, Rodney C.↗

NASA NTRS1987

Aerothermal modeling program. Phase 2, element A: Improved numerical methods for turbulent viscous recirculating flows

The objective of this effort is to develop improved numerical schemes for predicting combustor flow fields. Various candidate numerical schemes were evaluated, and promising schemes were selected for detailed assessment. The criteria for evaluation included accuracy, computational efficiency, stability, and ease of extension to multidimensions. The candidate schemes were assessed against a variety of simple one- and two-dimensional problems. These results led to the selection of the following schemes for further evaluation: flux spline schemes (linear and cubic) and controlled numerical diffusion with internal feedback (CONDIF). The incorporation of the flux spline scheme and direct solution strategy in a computer program for three-dimensional flows is in progress.

Karki, K. C.↗

NASA NTRS1987

Development of generalized block correction procedures for the solution of discretized Navier-Stokes equations

Effort is directed towards developing a solution method which combines advantages of both the iterative and the direct methods. It involves iterative solution on the fine grid, convergence of which is enhanced by a direct solution for correction quantities on a coarse grid. The proposed block correction procedure was applied to compute recirculating flow in a driven cavity.

Kelkar, Kanchan M.↗

NASA NTRS1987

A low-Reynolds-number two-equation turbulence model for predicting heat transfer on turbine blades

A modified form of the Lam-Bremhorst low-Reynolds number kappa-epsilon turbulence model was developed for predicting transitional boundary layer flows under conditions characteristic of gas turbine blades. The application of the model to flows with pressure gradients is described. Tests against a number of turbine blade cascade data sets are included. Some additional refinements of the model that were made in recent months are explained.

Patankar, Suhas V.↗

NASA NTRS1987

Prediction of transition on a flat plate under the influence of free-stream turbulence using low-Reynolds-number two-equation turbulence models

The prediction characteristics and capabilities of two popular two-equation low-Reynolds-number turbulence models (Jones, Launder 1972; Lam, Bremhorst 1981) have been evaluated with respect to the prediction of transition of a flat plate under the influence of free-stream turbulence. The sensitivity of the predictions to free-stream turbulence intensity, initial starting location of the calculation, and the assumed initial starting profiles for k and epsilon has been determined and presented. Although both models predict the correct qualitative characteristics of transition, they also exhibit significant quantitative deficiencies with regard to both the predicted location and the length of transition. A modification to the production term in the turbulent kinetic energy equation is proposed which is based on a simple stability criterion and correlated to the free-stream turbulence level. The modification becomes inactive in the fully turbulent regime, but is shown to improve both the qualitative and quantitative characteristics of the transition predictions.

Schmidt, Rodney C.↗

NASA NTRS1986

Aerothermal modeling program, phase 2

The main objective of the NASA sponsored Aerothermal Modeling Program, Phase 2--Element A, is to develop an improved numerical scheme for predicting combustor flow fields. This effort consists of the following three technical tasks. Task 1 involves the selection and evaluation of various candidate numerical techniques. Task 2 involves an in-depth evaluation of the selected numerical schemes. Task 3 involves the convection-diffusion scheme and the direct solver that will be incorporated in the NASA 3-D elliptic code (COM3S).

Karki, K. C.↗

NASA NTRS1986

Efficient numerical techniques for complex fluid flows

The central feature in any flow prediction method is the treatment of the coupling between the momentum and continuity equations. In natural-convection flows, the energy equation also becomes strongly coupled with the momentum equations. Because of the nonlinear nature of the coupling, these equations are solved iteratively. Iterative methods are often prone to slow convergence, divergence, and extreme sensitivity to underrelaxation factors. The aim of the present research is to develop more efficient and reliable solution schemes for the coupled flow equations. Such schemes will significantly reduce the expense of computing complex flows encountered in combustion chambers, gas turbines, heat exchangers, and other practical equipment. In the work completed so far, a technique employing norm reduction in conjunction with the successive-substitution and Newton-Raphson techniques was developed. Also, a block-correction procedure for the flow equations is currently being formulated and tested.

Patankar, Suhas V.↗

NASA NTRS1986

Development of low Reynolds number two equation turbulence models for predicting external heat transfer on turbine blades

A research effort was underway to study the use of two equation low Reynolds number turbulence models in predicting gas side heat transfer on turbine blades. The major objectives of this work are basicly threefold: study the predictive capabilities of two equation low Reynolds number turbulence models under the conditions characteristic of modern gas turbine blades; explore potential improvements to the models themselves as well as to the specification of initial conditions; and provide a comparison of the predictions of these models with the experimental data from a broad range of recently available turbine cascade experiments. The problems associated with predicting the boundary layer transition from laminar to turbulent flow are emphasized, as this may be the most serious deficiency of current modeling techniques. The results and conclusions of the first two phases are briefly described.

Patankar, Suhas V.↗

NASA NTRS1985

Efficient numerical techniques for complex fluid flows

The aim of the present research program is the development of more efficient and reliable calculation schemes for the coupled momentum and continuity equations. The resulting schemes would significantly reduce the expense of computing complex flows such as those in combustion chambers, gas turbines, and heat exchangers.

Patankar, Suhas V.↗

NASA NTRS1985

Prediction of turbine blade heat transfer

It is planned to incorporate a number of low Reynolds number turbulence models in a general two-dimensional boundary layer calculation procedure. This will be applied to different flow conditions over turbine blades and the predictions will be compared with experimental data. The prediction activity will lead to a recommendation about a satisfactory turbulence model for turbine blade heat transfer.

Patankar, Suhas V.↗