Search NASA⌕ Search

Engineering topics

Patel, P.

Publications and source records attributed to Patel, P..

At least 19 records

Correlations between asymmetric compression, burn amplification, and hot-spot velocities in inertial confinement fusion implosions

Here, this manuscript examines the correlations between the hot-spot velocity (an observable signature of residual kinetic energy), low-mode implosion asymmetries, and burn amplification in inertial confinement fusion implosions on the National Ignition Facility (NIF). Using a combination of two-dimensional axis-symmetric and three-dimensional radiation-hydrodynamic simulations coupled to neutronics, we find that for typical NIF implosions, the stagnation asymmetry multiplies the observed hot-spot velocity anywhere from 80% to 120%, while burn amplification always increases it. Additionally, we find stagnation asymmetry typically deflects the observed hot-spot flow. The two mechanisms (low-mode implosion asymmetries and burn amplification) can be decoupled, and application of a simple model to a database of cryogenic implosions on the NIF infers the total hot-spot velocity amplification. This finding modifies the interpretation of data collected from inertial confinement fusion experiments and impacts the magnitude and origin of low-mode asymmetries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring and simulating ice–ablator mix in inertial confinement fusion

Fuel–ablator mix has been established as a major performance degrading effect in the burning plasma regime of recent inertial confinement fusion (ICF) experiments. As such, the study of fuel–ablator mix with experiments and simulations can provide valuable insight for our understanding of these experiments and establish a path for even higher yields and increased robustness. Here we present a novel high-yield experimental ICF design that is motivated by recent experiments measuring ice–ablator mix with a CH ablator instead of a high-density carbon (HDC) ablator. Here we review these experiments in more detail and describe the modeling assumptions and parameters used to obtain agreement with the data from implosion and burn simulations with mix. Using this mix model calibrated a posteriori to the experimental data, we design an implosion that uses a CH ablator that is predicted to achieve better performance than a recent experiment that achieved net target gain of 1.5 in HDC. Because hydrodynamic instabilities are greatly reduced with this new design, we also expect a high reproducibility at the same implosion adiabat as current record yield experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Model validation for inferred hot-spot conditions in National Ignition Facility experiments

Progress toward ignition requires accurately diagnosing current conditions and assessing proximity metrics for implosion experiments on the National Ignition Facility. Hot-spot conditions are not directly measured, but rather inferred, often using simple 0- and 1D models [P. Patel et al., Phys. Plasmas 27, 050901 (2020)]. In this work, we present a detailed accuracy validation exercise using a set of ~20,000 2D simulations encompassing a variety of performance and degradation levels. We find good agreement between the model-inferred pressure and the simulated burn-weighted pressure at peak neutron production and also present results on the precision of inferred quantities using a Markov-Chain Monte Carlo algorithm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Achieving record hot spot energies with large HDC implosions on NIF in HYBRID-E

HYBRID-E is an inertial confinement fusion implosion design that increases energy coupled to the hot spot by increasing the capsule scale in cylindrical hohlraums while operating within the current experimental limits of the National Ignition Facility. HYBRID-E reduces the hohlraum scale at a fixed capsule size compared to previous HYBRID designs, thereby increasing the hohlraum efficiency and energy coupled to the capsule, and uses the cross-beam energy transfer (CBET) to control the implosion symmetry by operating the inner (23° and 30°) and outer (44° and 50°) laser beams at different wavelengths (Δλ> 0). Small case to capsule ratio designs can suffer from insufficient drive at the waist of the hohlraum. We show that only a small amount of wavelength separation between the inner and outer beams (Δλ1-2 Å) is required to control the symmetry in low-gas-filled hohlraums (0.3 mg/cm3 He) with enough drive at the waist of the hohlraum to symmetrically drive capsules 1180 μm in outer radius. This campaign is the first to use the CBET to control the symmetry in 0.3 mg/cm3 He-filled hohlraums, the lowest gas fill density yet fielded with Δλ> 0. We find a stronger sensitivity of hot spot P2 in μm per Angstrom (40–50 μm/Å wavelength separation) than observed in high-gas-filled hohlraums and previous longer pulse designs that used a hohlraum gas fill density of 0.6 mg/cm3. There is currently no indication of transfer roll-off with increasing Δλ, indicating that even longer pulses or larger capsules could be driven using the CBET in cylindrical hohlraums. We show that the radiation flux symmetry is well controlled during the foot of the pulse, and that the entire implosion can be tuned symmetrically in the presence of the CBET in this system, with low levels of laser backscatter out of the hohlraum and low levels of hot electron production from intense laser–plasma interactions. Radiation hydrodynamic simulations can accurately represent the early shock symmetry and be used as a design tool, but cannot predict the late-time radiation flux symmetry during the peak of the pulse, and semi-empirical models are used to design the experiments. Deuterium–tritium (DT)-layered tests of 1100 μm inner radius implosions showed performance close to expectations from simulations at velocities up to ~360 km/s, and record yields at this velocity, when increasing the DT fuel layer thickness to mitigate hydrodynamic mixing of the ablator into the hot spot as a result of defects in the ablator. However, when the implosion velocity was increased, mixing due to these defects impacted performance. The ratio of measured to simulated yield for these experiments was directly correlated with the level of observed mixing. These simulations suggest that reducing the mixing, e.g., by improving the capsule defects, could result in higher performance. In addition, future experiments are planned to reduce the coast time at this scale, delay between the peak compression and the end of the laser, to increase the hot spot convergence and pressure. To reduce the coast time by several hundred ps compared to the 1100 μm inner radius implosions, HYBRID-E has also fielded 1050 μm inner radius capsules, which resulted in higher hot spot pressure and a fusion energy yield of ~170 kJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Record Energetics for an Inertial Fusion Implosion at NIF

Inertial confinement fusion seeks to create burning plasma conditions in a spherical capsule implosion, which requires efficiently absorbing the driver energy in the capsule, transferring that energy into kinetic energy of the imploding DT fuel and then into internal energy of the fuel at stagnation. In this work, we report new implosions conducted on the National Ignition Facility (NIF) with several improvements on recent work [Phys. Rev. Lett. 120, 245003 (2018); Phys. Rev. E 102, 023210 (2020)]: larger capsules, thicker fuel layers to mitigate fuel-ablator mix, and new symmetry control via cross-beam energy transfer; at modest velocities, these experiments achieve record values for the implosion energetics figures of merit as well as fusion yield for a NIF experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fill tube dynamics in inertial confinement fusion implosions with high density carbon ablators

Plasma jets, such as γ-ray burst jets, Herbig–Haro jets, μ-quasar jets, and active galactic nuclei jets, are found throughout the universe [S. Mendoza et al., Rev. Mex. Astron. Astrofis. 41, 453 (2005)]. Plasma jets are also present in indirect drive inertial confinement fusion experiments originating from the capsule's fill tube and occasionally from divots and voids in the capsules, particles on the exterior of the capsule, or from the tent holding the capsule in the target. This paper looks at two different gas-filled capsule implosions containing a plasma jet resulting from a capsule fill tube and fill channel, both of which utilized high density carbon ablators. Two models were developed, a drag and a snowplow model, which use the time-dependent motion of the injected mass through the hotspot to estimate the mass injected into the hotspot from the fill tube and channel, arriving at an average injected mass of ~84.5 ± 25.5 ng for the first experiment and 91 ± 20 ng for the second experiment. Furthermore, unlike previous methods to estimate fill tube injected mass, these techniques do not assume that the mixed mass is in thermal equilibrium with the hotspot or that the x-ray emission is only coming from within the hotspot itself. This paper also discusses the features seen in these experiments which include limb brightening in the shell for undoped ablators and flattening in the ablator from shadowing by the fill tube.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Azimuthal Drive Asymmetry in Inertial Confinement Fusion Implosions on the National Ignition Facility

Data from nuclear diagnostics present correlated signatures of azimuthal implosion asymmetry in recent indirect-drive inertial confinement fusion (ICF) implosion campaigns performed at the National Ignition Facility (NIF). The mean hot-spot velocity, inferred from the Doppler shift of 14 MeV neutrons produced by deuterium-tritium (DT) fusion, is systematically directed toward one azimuthal half of the NIF target chamber, centered on φ ≈ 7 0 ° . Areal density ( ρ R ) asymmetry of the converged DT fuel, inferred from nuclear activation diagnostics, presents a minimum ρ R in the same direction as the hot-spot velocity and with Δ ρ R amplitude correlated with velocity magnitude. These two correlated observations, which are seen in all recent campaigns with cryogenic layers of DT fuel, are an understood signature of asymmetry in the fuel convergence, implying a systematic azimuthal drive asymmetry across a wide range of shot and target configurations. The direction of the implied radiation asymmetry is observed to cluster toward the hohlraum diagnostic windows. Furthermore, this low-mode asymmetry degrades hot-spot conditions at peak convergence and limits implosion performance and yield

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling the 3-D structure of ignition experiments at the NIF

This study details a model used to infer the 3-D structure of the stagnated hot-spot and shell of inertial confinement fusion implosion experiments at the National Ignition Facility. The model assumes that 3-D low-mode drive perturbations can account for the majority of stagnation asymmetries experimentally observed. It uses an adaptive sampling algorithm to navigate the 24-D input parameter space to find a 3-D x-ray flux asymmetry whose application to an otherwise symmetric implosion results in a consistent match between synthetic and experimental diagnostic observables. The model is applied to a series of experiments and is able to achieve a consistent match for over 41 different observables, providing a high-fidelity reconstruction of the stagnation hot-spot and shell profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress of indirect drive inertial confinement fusion in the United States

Abstract Indirect drive converts high power laser light into x-rays using small high- Z cavities called hohlraums. X-rays generated at the hohlraum walls drive a capsule filled with deuterium–tritium (DT) fuel to fusion conditions. Recent experiments have produced fusion yields exceeding 50 kJ where alpha heating provides ~3× increase in yield over PdV work. Closing the gaps toward ignition is challenging, requiring optimization of the target/implosions and the laser to extract maximum energy. The US program has a three-pronged approach to maximize target performance, each closing some portion of the gap. The first item is optimizing the hohlraum to couple more energy to the capsule while maintaining symmetry control. Novel hohlraum designs are being pursued that enable a larger capsule to be driven symmetrically to both reduce 3D effects and increase energy coupled to the capsule. The second issue being addressed is capsule stability. Seeding of instabilities by the hardware used to mount the capsule and fill it with DT fuel remains a concern. Work reducing the impact of the DT fill tubes and novel capsule mounts is being pursed to reduce the effect of mix on the capsule implosions. There is also growing evidence native capsule seeds such as a micro-structure may be playing a role on limiting capsule performance and dedicated experiments are being developed to better understand the phenomenon. The last area of emphasis is the laser. As technology progresses and understanding of laser damage/mitigation advances, increasing the laser energy seems possible. This would increase the amount of energy available to couple to the capsule, and allow larger capsules, potentially increasing the hot spot pressure and confinement time. The combination of each of these focus areas has the potential to produce conditions to initiate thermo-nuclear ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proposed LISA Telescope Design

The Laser Interferometer Space Antenna (LISA), requires high precision displacement measurement between widely spaced pairs of freely floating test masses. We describe a proposed design for the optical telescopes that form an essential part of the laser heterodyne interferometry measurement system and discuss how the design and implementation will address the unique challenges of this specialized application.

Livas, J.↗

A simulation-based model for understanding the time dependent x-ray drive asymmetries and error bars in indirectly driven implosions on the National Ignition Facility

Time-dependent low-mode asymmetries are believed to play a leading role in limiting the performance of current inertial confinement fusion implosions on the National Ignition Facility (NIF) [E. I. Moses et al., Phys. Plasmas 16, 041006 (2009)]. These long wavelength modes are initiated and driven by asymmetries in the x-ray flux from the hohlraum; however, the underlying hydrodynamics of the implosion also act to modify and amplify these asymmetries. Here we present here a simulation-based model connecting the time-dependent drive asymmetry seen by the capsule to the measured inflight and hot spot symmetries. This approach is based on a Green's function analysis for which we evaluate the response of the capsule to impulses of drive asymmetry at a series of times. Our model sheds new light on the sensitivity to the drive asymmetry of an imploded capsule, giving a new tool for design. Inverting the problem and finding the drive asymmetry needed to match the experimental data allow us to tightly constrain the drive asymmetry seen by the capsule, providing an error estimate on the result. Doing so, we are able to point out when and how the complex hohlraum simulations start to deviate from what they should obtain to match the experimental data. Ultimately, we project to use this model to make some experimental recommendations to fix the time-dependent low-mode asymmetry of indirectly driven implosions and identify additional measurements to further constrain the asymmetries with a view to improving target design on the NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion performance of subscale beryllium capsules on the NIF

Many inertial fusion designs use capsules made of beryllium, as its high mass ablation rate is advantageous. here, we present the first systematic experimental study of indirectly driven beryllium capsules with a cryogenic deuterium-tritium fuel layer. “Subscale” capsules, 80% of the nominal National Ignition Facility point design radius, show optimal performance with the remaining mass of ~6–7%. A buoyancy-drag mix model explains the implosion performance, suggesting that fuel-ablator mix is the dominant degradation mechanism. Increasing the capsule scale is predicted to reduce the impact of fuel-ablator mix and achieve high performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beyond alpha-heating: driving inertially confined fusion implosions toward a burning-plasma state on the National Ignition Facility

Recent progress on indirectly-driven inertial confinement fusion (ICF) work at the National Ignition Facility (NIF) is briefly reviewed. An analytic criteria for an ICF burning plasma is given and compared to recent ICF implosion data from the NIF. Scaling of key hot-spot performance metrics is derived from simple physics considerations, including some speculative impacts of asymmetry on the assembly and disassembly of an ICF implosion. A steepest descent solution for the nonlinear equation for hot-spot pressure at peak compression, with the full effects of alpha-heating, is also given. To test if the scalings derived in this paper have some merit, they are compared to data from a variety of recent implosion campaigns on NIF and good agreement is observed. Given the implications of the scalings and existing data, a strategy for injecting more energy into the hot-spot of NIF indirectly driven ICF implosions is defined and the principles of the strategy is discussed. The importance of implosion velocity, late-time ablation pressure, and implosion scale with good symmetry in obtaining the goal of ~50% more hot-spot energy are highlighted along with the limitations of trying to leverage low fuel-adiabat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Indications of flow near maximum compression in layered DT implosions at the National Ignition Facility

An accurate understanding of burn dynamics in implosions of cryogenically layered deuterium and tritium (DT) filled capsules, obtained partly through precision diagnosis of these experiments, is essential for assessing the impediments to achieving ignition at the National Ignition Facility (NIF). We present measurements of neutrons from such implosions. The apparent ion temperatures (Tion) are inferred from the variance of the primary neutron spectrum. Consistently higher DT than DD Tions are observed, and the difference is seen to increase with increasing apparent DT Tion. The line-of-sight r.m.s. variations of both DD and DT Tion are small, ~150 eV, indicating an isotropic source. DD neutron yields are consistently high relative to the DT neutron yields given the observed Tions. Spatial and temporal variations of the DT temperature and density, DD-DT differential attenuation in the surrounding DT fuel, and fluid motion variations contribute to DT Tion > DD Tion, but are in a 1D model insufficient to explain the data. We hypothesize that in a 3D interpretation, these effects combined could explain the results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advancing the capability of the gated laser-entrance-hole imager on the National Ignition Facility

A new configuration based on the recent off-line calibrations of the gated laser entrance hole diagnostic on the National Ignition Facility provides 4-8 interleaved frames per experiment using the standard two frame sensor settings. Since its implementation, the new design has greatly increased the data return for hundreds of experiments at the National Ignition Facility. The large quantity of images from a variety of physics campaigns has revealed information on plasma evolution in hohlraums.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗