Paul U. Lee | Search NASA

NASA NTRSDate not supplied

Demonstrating the Early Adopter Benefits of Submitting Multiple Trajectory Options for Airlines

Integrated Demand Management (IDM), is a NASA developed Traffic Flow Management (TFM) concept that uses Collaborative Trajectory Options Program (CTOP) to precondition traffic flows into the Time Based Flow Management (TBFM) region, helping traffic planners manage imbalances between demand and capacity in the National Airspace (NAS). A workshop held at NASA was conducted to demonstrate how individual airlines can be impacted by using Trajectory Options Sets (TOS) during IDM operations. A primary concern that was specifically addressed in a part-task Human-in-the-Loop simulation was who received the greater benefit, TOS participating or non-TOS participating airlines? The results showed that TOS participating airlines received greater benefit in terms of ground delay, number of reroute options, and additional flight time, than non-TOS participating airlines. However, this result was dependent on the number and location of flights. Therefore, it was advantageous for airlines to equip TOS. In addition, we found that non-TOS participating airlines also benefitted from other airlines participating in TOS, because the total system-wide ground delay was reduced as more TOS were introduced into the system. The evidence suggests that the benefits were distributed fairly, and there were no unfair disadvantages for airlines who did not equip TOS.

Integrated Demand Management↗

NASA NTRSDate not supplied

Integrating Upper Class E Traffic Management (ETM) Operations into the National Airspace System: Use Cases and Research Questions

As new categories of vehicles are introduced in the National Airspace System, so too are novel concepts for a cooperative approach to traffic management environments. One of these new environments, Upper Class E Traffic Management (ETM), is expected to include a variety of high altitude, long endurance vehicles with a range of performance capabilities and mission profiles that operate in cooperative areas above 60,000 feet. In addition to developing the rules, architecture, and systems for operations within the ETM environment itself, it is also important to consider how ETM vehicles will integrate with traditional Air Traffic Management and interact with Air Traffic Control (ATC) as they traverse ATC-controlled airspace and transition in and out of cooperative ETM operating areas. As a first step toward future ETM demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center’s Airspace Operations Laboratory, use cases with step-by-step procedures were developed to identify both nominal and off-nominal scenarios in which ETM operations will interact with ATC. As NASA prepares to develop a simulation platform to demonstrate ETM cooperative practices and ETM-ATC interactions, the procedures, ATC roles and responsibilities, data exchange requirements, and research questions that were identified as part of use case development will inform scenario and system architecture design. The upcoming simulation work will include initial prototype ETM-ATC coordination tools to support ATC controllers’ interactions with ETM operations. This paper will briefly discuss NASA’s upcoming ETM development work and then provide background on ETM-ATC interactions, describe each ETM-ATC interaction use case, and discuss open questions on concept, procedures, and assumptions.

ATC↗

NASA NTRSDate not supplied

Study of Pairwise Deconfliction Metrics to Analyze Air Traffic Complexity in Upper Class E Airspace

Upper Class E Traffic Management (ETM) is envisioned to cooperatively facilitate operations of a diverse set of aerial vehicles, such as high-altitude long-endurance fixed-wing unmanned aircraft (low-speed and high-speed), high-altitude platforms, airships, stratospheric balloons, supersonic unmanned and commercial aircraft, etc., with a wide variety of mission types, performance characteristics, communication, navigation and surveillance capabilities, maneuverability, and on-board avionics in the National Airspace System (NAS) ’above’ 60,000 feet above mean sea level, without an active and direct control from human air traffic controllers. A diverse mixture of aerial vehicle types creates significant challenges in understanding air traffic complexity, which may not correlate strongly with air traffic density. One key step for determining air traffic complexity in upper class E airspace is to first understand pairwise deconfliction metrics such as reachability, reserve area, and reserve flight time for each pair of unique aerial vehicle types under potential conflict. Therefore, pairwise deconfliction metrics are first defined, and analytical equations are derived for conflict resolution using the heading change maneuver. Next, case studies are performed to analyze deconfliction metrics to avoid secondary conflicts in upper class E airspace. The study shows that pairwise deconfliction metrics are functions of maneuverability, performance characteristics, uncertainty in position and velocity, heading angle change, and conflict angle of aerial vehicles. The next step for this research is to build a mathematical model for air traffic complexity using pairwise deconfliction metrics and validate it in an upper Class E simulation environment.

Airspace Complexity↗

NASA NTRSDate not supplied

Roadmap to Cooperative Operating Practices for Strategic Conflict Detection and Resolution in the Upper Class-E Traffic Management Concept

As the governing body of flight operations in the highly anticipated emergent area of Upper Class E airspace (60,000 ft and above), the Federal Aviation Administration (FAA) has recognized the potential for a possible extensible traffic management system for new entrants into this domain. Following the successes with Unmanned Aircraft Systems (UAS) Traffic Management (UTM) and Advanced / Urban Air Mobility (AAM / UAM) Traffic Management programs, FAA put forth an initial concept of operations for supporting the start of the Upper Class E Traffic Management (ETM) concept. Like UTM and AAM / UAM, ETM is envisioned to also be a community-based, industry driven cooperative management concept. However, tailoring it to be adaptable to the atmospheric communication, navigation, and surveillance deficits, as well as the diverse vehicle and mission profiles operating in the ETM environment will be the challenge. As such, the National Aeronautics and Space Administration (NASA) Ames Research Center has been investigating several technologies that will help enable industry in the development of this new type of cooperative operating environment. These technologies are being prototyped and will be tested in a collaborative evaluation of an initial ETM system in late 2023. The evaluation will concentrate on building out ETM system technologies that will inform the participants regarding operational intent sharing, strategic conflict detection, and the resultant deconfliction process. In addition to the technical aspects, key roles and responsibilities will need to be defined. This will be done through exploring community-agreed upon Cooperative Operating Practices (COPs) that include procedures and capabilities to aid in timely, strategic conflict identification and resolution to be developed during the evaluation. As an initial step to the evaluation, the ETM research team at NASA Ames solicited industry feedback on various aspects of ETM operations from subject matter experts. A virtual tabletop walkthrough session was held over a two-day period to follow a roadmap through the functional steps needed to build COPs, focusing on strategic conflict detection and resolution. Overall, the ETM tabletop provided insights into how the community wanted to instantiate the generation and sharing of operational intent, detect strategic conflicts and resolve those conflicts using a preliminary set of procedural community-agreed upon COPs.

Upper Class-E Traffic Management (ETM)↗

NASA NTRSDate not supplied

Roadmap to Cooperative Operating Practices for Strategic Conflict Detection and Resolution in the Upper Class E Traffic Management Concept

As the governing body of flight operations in the highly anticipated emergent area of Upper Class E airspace (60,000 ft and above), the Federal Aviation Administration (FAA) has recognized the potential for a possible extensible traffic management system for new entrants into this domain. Following the successes with Unmanned Aircraft Systems (UAS) Traffic Management (UTM) and Advanced / Urban Air Mobility (AAM / UAM) Traffic Management programs, FAA put forth an initial concept of operations for supporting the start of the Upper Class E Traffic Management (ETM) concept. Like UTM and AAM / UAM, ETM is envisioned to also be a community-based, industry driven cooperative management concept. However, tailoring it to be adaptable to the atmospheric communication, navigation, and surveillance deficits, as well as the diverse vehicle and mission profiles operating in the ETM environment will be the challenge. As such, the National Aeronautics and Space Administration (NASA) Ames Research Center has been investigating several technologies that will help enable industry in the development of this new type of cooperative operating environment. These technologies are being prototyped and will be tested in a collaborative evaluation of an initial ETM system in late 2023. The evaluation will concentrate on building out ETM system technologies that will inform the participants regarding operational intent sharing, strategic conflict detection, and the resultant deconfliction process. In addition to the technical aspects, key roles and responsibilities will need to be defined. This will be done through exploring community-agreed upon Cooperative Operating Practices (COPs) that include procedures and capabilities to aid in timely, strategic conflict identification and resolution to be developed during the evaluation. As an initial step to the evaluation, the ETM research team at NASA Ames solicited industry feedback on various aspects of ETM operations from subject matter experts. A virtual tabletop walkthrough session was held over a two-day period to follow a roadmap through the functional steps needed to build COPs, focusing on strategic conflict detection and resolution.

Upper Class E Traffic Management (ETM)↗

NASA NTRSDate not supplied

Identifying Information Needs and Tools to Support Interactions between Upper Class E Traffic Management (ETM) Operations and the Air Traffic System (ATS)

With the introduction of high-altitude long endurance (HALE) vehicles and balloons designed to operate above 60,000 feet, the frequency and duration of operations in Upper Class E airspace are expected to increase. In response to the need for scalable traffic management for these diverse operations at higher altitudes, the FAA introduced the Upper Class E Traffic Management (ETM) concept. Like the successful demonstration of Uncrewed Aircraft System (UAS) Traffic Management (UTM), the ETM concept is also designed as a community-based, industry-driven cooperative approach to traffic management. As these vehicles and balloons ascend to/descend from ETM Cooperative Areas in Upper Class E, they will transit through Class A controlled airspace where they will interact with various entities of the conventional Air Traffic System (ATS) (e.g., Air Traffic Control (ATC)). This work explores tools that will help support ETM-ATS interactions for users throughout the ATS, as well as ETM Operators. An information needs analysis using ETM-ATS interaction use cases, revealed that the needed functionalities generally grouped themselves into two main themes, the visualization of flights and airspace designations, and digital communication capabilities across various human users. In this paper, we describe two envisioned tools, 1) an Integrated Visualization Tool to display flight information and airspace designations, and 2) an Integrated Digital Communication Tool to facilitate two-way information exchange between users about vehicle position information, the coordination of airspace approvals, and notifications. The tools we describe create an integrated visual representation of vehicles and airspace designations with a set of communication capabilities to consolidate information into a single display interface. These tools may be used to guide the development of prototype tools for demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center to further explore ETM-ATS interactions within the ETM concept.

Upper Class E Traffic Management (ETM)↗

NASA NTRSDate not supplied

Usability of an Updated Version of the Supplemental Data Service Provider-Consolidated Dashboard for Supporting Uncrewed Aircraft System Traffic Management

The Supplemental Data Service Provider-Consolidated Dashboard (SDSP-CD) is a preflight planning user interface (UI) that serves to aid operators when drafting routes for small uncrewed aircraft systems (sUASs). The primary function of the SDSP-CD is to identify hazards that an sUAS may encounter along a proposed flight path and assess the severity of these risks. A usability study was conducted on an updated version of the SDSP-CD to determine if the most recent iterations made to the system improved objective performance and subjective user experience. There are two main components of the SDSP-CD interface: (1) the dashboard and (2) the interactive map. The dashboard provides users with hazard and vehicle limitations for each sUAS in their fleet while the map contains a graphical representation of each vehicle’s route, hazard details, and geographic information. A series of preflight risk-assessment questions and tasks were developed to examine how participants interact with the updated version of the SDSP-CD. Additionally, a new service that measures vertiport congestion was developed and included as one of the services that was tested. In the present study, participants were trained to use the SDSP-CD and then completed two simulated scenarios during which they performed a variety of tasks, responded to questions, and completed surveys. The two scenarios developed for the present study were the Package Delivery and Hurricane Preparation scenarios. The Package Delivery scenario involved a fleet of four sUASs delivering low-stakes items (e.g., lunches and snacks) to people in a fictitious city. The Hurricane Preparation scenario involved a fleet of 11 sUASs delivering a range of supplies (from medicine to boardgames) to employees stranded at an office park due to road closures caused by an impending hurricane. Participants assumed the role of a fleet manager during both scenarios and were responsible for managing the sUASs in their fleet. Questions included those with objectively correct responses, open-ended strategy responses, and subjective user experience feedback. It was found that participants were largely successful at using the SDSP-CD interface to answer questions with objectively correct responses. Additionally, participants were able to use reasoning and logic based on the information available in the SDSP-CD to determine the cause of various risks and what actions they would consider taking. Finally, although participants reported that there were elements of the UI that could be improved, overall feedback pertaining to user experience suggested that the SDSP-CD concept is viable.

usability testing↗

NASA NTRSDate not supplied

Development of a Safety Hazards Risk Assessment Tool for Uncrewed Aircraft System Traffic Management during Preflight Planning

Tremendous growth in the uncrewed and remotely piloted vehicle market is expected in low-altitude, uncontrolled airspace, resulting in potential decreases in safety without systems that support monitoring, assessing, and mitigating risk. At NASA, the System-Wide Safety (SWS) project has been developing a suite of data-driven tools to predict hazards so that the potential risks that these hazards pose can be mitigated. Services to predict various hazards have been developed, including battery capacity, proximity to static obstacles, population risks, global positioning system signal strength, radio frequency spectrum interference risk, and vertiport congestion. These services can monitor hazards along a flight path and if any risks posed by these hazards exceed a threshold, the uncrewed aircraft system (UAS) fleet manager can be alerted to mitigate the risk by modifying the flight path, changing the scheduled departure or arrival times, and/or diverting the vehicle to an alternate vertiport. These services were originally developed to monitor and assess risks during flight, but they have been adapted to assess hazard risks prior to departure so that a fleet manager can evaluate the potential risks for a fleet of UAS along their planned flight paths. These services have been integrated into a prototype tool called the Supplemental Data Service Provider-Consolidated Dashboard (SDSP-CD), developed at NASA Ames Research Center. The tool consists of a dashboard which provides a comprehensive overview for a number of risks and a map display that shows the details of the hazards along each flight’s path. Based on the findings from three previous studies, the SDSP-CD has been updated with new design elements and functions. In this paper, we describe lessons learned from the previous studies, changes made to the interface, and the feedback received during a follow-up usability study. Overall, participants reported that there is a substantial benefit of having a fleet manager use a consolidated dashboard to assess hazards for the vehicles in their fleet and to provide situational awareness to potential risks so that they can be mitigated prior to flight. Once the SDSP-CD matures, it will need to be integrated into flight and mission planning tools. Some initial thoughts on how this integration should be accomplished are shared in this paper. Finally, the functional differences between preflight vs. in-flight risk assessment and the differences in fleet manager vs. UAS pilot roles that may require different information and user interactions are discussed.

preflight↗