Effective Wang-Teter kernels for improved orbital-free density functional theory simulations
Not provided.
Engineering topics
Publications and source records attributed to Pavanello, Michele.
Not provided.
Orbital-free density functional theory constitutes a computationally highly effective tool for modeling electronic structures of systems ranging from room-temperature materials to warm dense matter. Its accuracy critically depends on the employed kinetic energy (KE) density functional, which has to be supplied as an external input. In this work we consider several nonlocal and Laplacian-level KE functionals and use an external harmonic perturbation to compute the static density response at T = 0 K in the linear and beyond-linear response regimes. We test for the satisfaction of exact conditions in the limit of uniform densities and for how approximate KE functionals reproduce the density response of realistic materials (e.g., Al and Si) against the Kohn-Sham DFT reference, which employs the exact KE. The results illustrate that several functionals violate exact conditions in the uniform electron gas (UEG) limit. We find a strong correlation between the accuracy of the KE functionals in the UEG limit and in the strongly inhomogeneous case. This empirically demonstrates the importance of imposing the limit of UEG response for uniform densities and validates the use of the Lindhard function in the formulation of kernels for nonlocal functionals. This conclusion is substantiated by additional calculations for bulk aluminum (Al) with a face-centered cubic (fcc) lattice and silicon (Si) with an fcc lattice, body-centered cubic (bcc) lattice, and semiconducting crystal diamond state. The analysis of fcc Al, and fcc as well as bcc Si data follows closely the conclusions drawn for the UEG, allowing us to extend our conclusions to realistic systems that are subject to density inhomogeneities induced by ions.
Orbital-free density functional theory and its time-dependent extension are efficient ab initio methods for calculating the electronic structure and dynamics of large systems. Through the calculation of the optical spectra of selected clusters, we reach three important conclusions: (1) The quality of the spectra is strongly affected by the quality of the corresponding ground-state electron density; (2) the adiabatic part of the electronic response to external perturbations can be safely evaluated at the semilocal level; and (3) the nonadiabatic, current-dependent part of the time-dependent Pauli potential is key to recover correct spectral envelopes.
Leveraging an open-subsystem formulation of Density Functional Theory (DFT) we aim at describing periodic and molecular systems alike, including their electronic and nuclear dynamics. Subsystem DFT enables first principles simulations to approach realistic time- and length-scales, and most importantly sheds light on the dynamical behavior of complex systems. Taking subsystem DFT to the time domain allows us to inspect the electron dynamics of condensed-phase systems in real time. In liquids and interfaces, we observe all the relevant regimes proper of non-Markovian open quantum system dynamics, such as electronic energy transfer, and screening. In addition, the ab-initio modeling of system-bath interactions brought us to observe and justify the holographic time-dependent electron density theorem. Contrary to interactions between molecular (finite) systems, when molecules interact with metal or semiconductor surfaces the electron dynamics is strongly non-Markovian with dramatic repercussions to the molecule’s response to external perturbations. Metals and semiconductors typically have large polarizabilities, and even in a regime of low coupling their effect on impinging molecular species is significant–line broadening, peak shift, and intensity borrowing are observed, characterized, and explained in terms of inter-subsystem dynamical interactions and a many-body decomposition of the system’s density-density response function in a way that transcends the canons of Fermi Golden Rule.
Time-dependent orbital-free density functional theory is an efficient ab initio method for calculating the electronic dynamics of large systems. In comparison to standard time-dependent density functional theory, it computes only a single electronic state regardless of system size, but it requires an additional time-dependent Pauli potential term. Herein we propose a nonadiabatic and nonlocal Pauli potential whose main ingredients are the time-dependent particle and current densities. Our calculations of the optical spectra of metallic and semiconductor clusters indicate that nonlocal and nonadiabatic time-dependent orbital-free density functional theory performs accurately for metallic systems and semiquantitatively for semiconductors. This paper opens the door to wide applicability of time-dependent orbital-free density functional theory for nonequilibrium electron and electron-nuclear dynamics of complex materials.
Time-dependent orbital-free density functional theory (DFT) is an efficient method for calculating the dynamic properties of large-scale quantum systems due to the low computational cost compared to standard time-dependent DFT. In this work, we formalize this method by mapping the real system of interacting fermions onto a fictitious system of noninteracting bosons. The dynamic Pauli potential and associated kernel emerge as key ingredients of time-dependent orbital-free DFT. Using the uniform electron gas as a model system, we derive an approximate frequency-dependent Pauli kernel. Pilot calculations suggest that space nonlocality is a key feature for this kernel. Nonlocal terms arise already in the second-order expansion with respect to unitless frequency and reciprocal space variable ($\frac{ω}{qk_F}$ and $\frac{q}{2k_F}$, respectively). Given the encouraging performance of the proposed kernel, we expect it will lead to more accurate orbital-free DFT simulations of nanoscale systems out of equilibrium. Additionally, the proposed path to formulate nonadiabatic Pauli kernels presents several avenues for further improvements which can be exploited in future work to improve the results.
Excited Costrained Density Functional Theory (XCDFT) is a variational excited state method that extends ground state DFT to the computation of low-lying excited states. It borrows much of the machinery of Constrained DFT (CDFT) with a crucial difference: the constraint imposes a population of one electron in the Hilbert space spanned by the virtuals of a reference ground state. Here, we present theory and implementation for evaluating nonadiabatic coupling vectors (NACVs) between the first excited state computed with XCDFT and the ground state. Our NACVs are computed analytically using density functional perturbation theory with a formalism that is general enough that could be applied to CDFT diabatic states. We showcase the new method with pilot NACV calculations for the conical intersection in H 3 , the avoided crossing in selenoacrolein, and the NACV magnitudes in azobenzene. Despite complications from the nonorthogonality of the wavefunctions, XCDFT’s energy surfaces and NACVs reproduce benchmark values and respect known sum rules within a reasonable degree. This shows that XCDFT is a viable method for nonadiabatic dynamics simulations.
Not provided.
Abstract Models of surface enhancement of molecular electronic response properties are challenging for two reasons: (a) molecule‐surface interactions require a simultaneous solution of the molecular and the surface dynamic response (a daunting task), and (b) when solving for the electronic structure of the combined molecule + surface system, it is not trivial to single out the particular physical effects responsible for enhancement. To tackle this problem, in this work, we apply a formally exact decomposition of the system's response function into subsystem contributions by using subsystem density functional theory (DFT), which grants access to dynamic polarizabilities and optical spectra. In order to access information about the interactions between the subsystems, we extend a previously developed subsystem‐based adiabatic connection fluctuation‐dissipation theorem of DFT to separate the additive from the nonadditive correlation energy and identify the nonadditive correlation as the van der Waals interactions. As an example, we choose benzene adsorbed on monolayer MoS 2 . We isolate the contributions to benzene's dynamic response arising from the interaction with the surface, and for the first time, we evaluate the enhancements to the effectiveness of C 6 coefficients as a function of benzene‐MoS 2 distance and adsorption site. We also quantify the spectral broadening of the benzene's electronic excited states due to their interaction with the surface. We find that the broadening has a similar decay law with the molecule‐surface distance as the leading van der Waals interactions (ie, R −6 ) and that the surface enhancement of dispersion interactions between benzene molecules is less than 5% but is still large enough (0.5 kcal/mol) to likely play a role in the prediction of interface morphologies.
The computation of excited electronic states with commonly employed (approximate) methods is challenging, typically yielding states of lower quality than the corresponding ground state for a higher computational cost. In this work, we present a mean-field method that extends the previously proposed excited constrained-density-functional theory (XCDFT) from single Slater determinants to ensemble one-body reduced density matrices for computing low-lying excited states. The method still retains an associated computational complexity comparable to a semilocal density functional theory (DFT) calculation while at the same time it is capable of approaching states with multireference character. Further, we benchmark the quality of this method on well-established test sets, finding good descriptions of the electronic structure of multireference states and maintaining an overall accuracy for the predicted excitation energies comparable to semilocal time-dependent DFT.
Abstract not provided.
Calculations of charged systems in periodic boundary conditions (PBC) are problematic because there are spurious interactions between the charges in different periodic images that can affect the physical picture. In addition, the intuitive limit of Coulomb interactions decaying to zero as the interacting charges are placed at infinite separation no longer applies, and for example total energies become undefined. Leveraging subsystem density functional theory (also known as density embedding) we define an impurity model that embeds a finite neutral or charged subsystem within an extended (infinite) surrounding subsystem. The combination of the impurity model and a consistent choice of the Coulomb reference provides us with an algorithm for evaluating the ionization potential (IP) in extended systems. Additionally, we demonstrate our approach in a pilot calculation of the IP of liquid water, based on a configuration from a prior ab initio molecular dynamics (AIMD) simulation of liquid water (Genova et al., J. Chem. Phys. 2016, 144, 234105). The calculations with the impurity model capture the broadening on the ionization energies introduced by the interactions between the water molecules. Furthermore, the calculated average IP value (10.5 eV) compare favorably to experiments (9.9-10.06 eV) and very recent simulations based on the GW approximation (10.55 eV), while at the same time outperforming density embedding calculations carried out with a naïve handling of the electrostatic interactions (about 7 eV).
Although the dynamics of charge transfer (CT) processes can be probed with ultimate lifetime resolution, the inability to control CT at the nanoscale is one of the most important roadblocks to revealing some of its deep fundamental aspects. In this work, we present an investigation of CT dynamics in a single iron tetraphenylporphyrin (Fe-TPP) donor/acceptor dyad adsorbed on a CaF 2 /Si(100) insulating surface. The tip of a scanning tunneling microscope (STM) is used to create local ionic states in one fragment of the dyad. The CT process is monitored by imaging subsequent changes in the neighbor acceptor molecule and its efficiency is mapped, revealing the influence of the initial excited state in the donor molecule. In the validation of the experiments, simulations based on density functional theory show that holes have a higher donor–acceptor CT rate compared to electrons and highlight a noticeable initial state dependence on the CT process. We leverage the unprecedented spatial resolution achieved in our experiments to show that the CT process in the dyad is governed via molecule–molecule coherent tunneling with negligible surface-mediated character.
Exploiting the machinery of Constrained Density Functional Theory (CDFT), we propose a variational method for calculating low-lying excited states of molecular systems. We dub this method eXcited CDFT (XCDFT). Excited states are obtained by self-consistently constraining a user-defined population of electrons, N c , in the virtual space of a reference set of occupied orbitals. By imposing this population to be N c = 1.0, we computed the first excited state of 15 molecules from a test set. Our results show that XCDFT achieves an accuracy in the predicted excitation energy only slightly worse than linear-response time-dependent DFT (TDDFT), but without incurring into problems of variational collapse typical of the more commonly adopted ΔSCF method. In addition, we selected a few challenging processes to test the limits of applicability of XCDFT. We find that in contrast to TDDFT, XCDFT is capable of reproducing energy surfaces featuring conical intersections (azobenzene and H3) with correct topology and correct overall energetics also away from the intersection. Venturing to condensed-phase systems, XCDFT reproduces the TDDFT solvatochromic shift of benzaldehyde when it is embedded by a cluster of water molecules. Finally, we find XCDFT to be a competitive method among single-reference methods for computations of excited states in terms of time to solution, rate of convergence, and accuracy of the result.