Search NASA⌕ Search

Engineering topics

Pearce, Carolyn I.

Publications and source records attributed to Pearce, Carolyn I..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Crystallization and Phase Transformations of Aluminum (Oxy)hydroxide Polymorphs in Caustic Aqueous Solution

Gibbsite, bayerite, and boehmite are important aluminum (oxy)hydroxide minerals in nature and have been widely deployed in various industrial applications. They are also major components in caustic nuclear wastes stored at various U.S. locations. Knowledge of their crystallization and phase transformation processes contributes to understanding their occurrence and could help optimize waste treatment processes. While it has been reported that partial conversion of bayerite and gibbsite to boehmite occurs in basic solutions at elevated temperatures, systematic studies of factors affecting the phase transformation as well as the underlying reaction mechanisms are non-existent, particularly in highly alkaline solutions. We explored the effects of sodium hydroxide concentrations (0.1~3 M), reaction temperature (60~100 ?) and aluminum concentrations (0.1~1 M) on the crystallization and transformation of these aluminum (oxy)hydroxides. Detailed structural and morphological characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) spectrometry revealed that these processes depend largely on the reaction temperature and the Al/OH- ratio. When 1 = Al/OH- = 2.5, the reactions favor formation of high crystallinity precipitates, whereas at Al/OH- ratio ? 2.5 precipitation ceases unless the Al concentration is higher than 1 M. We identified pseudoboehmite, bayerite and gibbsite as intermediate phases to bayerite, gibbsite and boehmite, respectively, all of which transform via dissolution-reprecipitation. Gibbsite transforms to boehmite in both acidic and weak caustic environments at temperatures above 80 oC. However, a ‘bar-shaped’ gibbsite morphology dominates in highly caustic environments (3 M NaOH). The findings enable a robust basis for selection of various solid phases by tuning the reaction conditions.

aluminum (oxy)hydroxide polymorphs, crystallizatio↗
DOE OSTI2021

Direct visualization of radiation-induced transformations at alkali halide–air interfaces

Radiation driven reactions at mineral/air interfaces are important to the chemistry of the atmosphere, but experimental constraints (e.g. simultaneous irradiation, in situ observation, and environmental control) leave process understanding incomplete. Using a custom atomic force microscope equipped with an integrated X-ray source, transformation of potassium bromide surfaces to potassium nitrate by air radiolysis species was followed directly in situ at the nanoscale. Radiolysis initiates dynamic step edge dissolution, surface composition evolution, and ultimately nucleation and heteroepitaxial growth of potassium nitrate crystallites mediated by surface diffusion at rates controlled by adsorbed water. Finally, in contrast to in situ electron microscopy and synchrotron-based imaging techniques where high radiation doses are intrinsic, our approach illustrates the value of decoupling irradiation and the basis of observation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microbial interactions with silicate glasses

Glass alteration in the presence of microorganisms has been a topic of research for over 150 years. Researchers from a variety of disciplines, including material science, biology, chemistry, geology, physics, and cultural heritage materials preservation have conducted experiments in this area to try and understand when, how, and why microorganism may interact and subsequently influence the alteration of glass. The breadth and depth of these studies are the topic of this review. This review presents a detailed history and a comprehensive overview of this field of research, while maintaining focus on the terrestrial alteration of anthropogenic silicate glasses. Within this manuscript is a schema for bio-interaction with silicate glasses and an outline of an evidence-based hypothesis on how these interactions may influence glass alteration processes. Topics discussed include microbial colonization of glass, development, and interactions of biofilms with glass surface, abiotic vs. biotic alteration processes, and signatures of bio-alteration. Future research needs and a discussion of practical drivers for this research are summarized.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nitrate and Nitrite Incompatibility with Hydroxide Ions in Concentrated NaOH Solutions: Implications for Hydroxide and Gibbsite Reactivity in Alkaline Nuclear Waste

Electrolyte solutions in alkaline nuclear waste contain aluminate, hydroxide, nitrate and nitrite with sodium as the predominant counterion. The salts of these ions are highly soluble, so the liquids are highly concentrated. This study found that there is a substantial incompatibility between the hydroxide and nitrate and/or nitrate ions. This was determined by the observations that adding just one molal of NaNO2 or NaNO3 to saturated NaOH solution precipitation of 12 moles of NaOH·H2O salt, whereas the common ion effect would have expected only about 1 mole to precipitate. Further analysis indicates that the presence of nitrate and nitrite drastically increases the reactivity of sodium hydroxide ions in solution, which likely influences the reactivity of other hydroxide-mediated reactions. This enhanced reactivity is likely because it disrupts large Na+-OH- ion networks because nitrate and nitrite do not fit in those ion networks similarly to how some ions cannot substitute into a foreign crystal lattice. In contrast, the aluminate ion did not have the same large incompatibility with hydroxide.

Nitrite, Nitrate, Aluminate, NaOH*H2O, Ion-aggrega↗
DOE OSTI2021

Influences on Subsurface Plutonium and Americium Migration

Plutonium (Pu) has been released to the environment worldwide, including approximately 1.85 × 1015 Bq (200 kg) of Pu from process waste solutions to unconfined soil structures at the Hanford Site in Washington State. The subsurface mobility of Pu is influenced by complex interactions with sediments, groundwater, and any co-contaminants within the waste stream. Previous investigations at Hanford have shown that Pu exists as discrete PuO 2 particles forming before or after disposal, as secondary solid phases formed from waste interactions with sediments as adsorbed/incorporated species, and/or as dissolved species. In this research, new evidence is presented for the existence of PuO 2 , PuO 2 -Bi 2 O 3 composites, and particles from burnt Pu metal in near-surface sediments where Pu-laden acidic process waste was disposed to sediments. Pu and americium (Am) L3 X-ray absorption spectroscopy and density functional theory suggest that, in larger, more crystalline PuO 2 particles, Am formed from radioactive decay is retained in the Pu IV O 2 structure as Am IV . The Pu and Am that were disposed of in an acidic waste stream have since migrated deeper into the subsurface with detection to at least 37 meters below ground surface. In contrast, Pu deposited near the ground surface from neutral pH waste is found to be homogeneously distributed and relatively immobile. Groundwater extractions performed on contaminated sediments indicate that both Pu and Am are recalcitrant, with Am being fractionally less extractable than Pu on a molar basis. These results suggest that the more mobile fraction of Am has migrated from the near-surface and may be present in the deeper sediments as a different phase than Pu. From these results, it is suggested that Pu and Am deposited from acidic wastes were initially mobile and became significantly less mobile as wastes were neutralized within the soil profile.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Reproduction of melting behavior for vitrified hillforts based on amphibolite, granite, and basalt lithologies

Abstract European Bronze and Iron Age vitrified hillforts have been known since the 1700s, but archaeological interpretations regarding their function and use are still debated. We carried out a series of experiments to constrain conditions that led to the vitrification of the inner wall rocks in the hillfort at Broborg, Sweden. Potential source rocks were collected locally and heat treated in the laboratory, varying maximum temperature, cooling rate, and starting particle size. Crystalline and amorphous phases were quantified using X-ray diffraction both in situ, during heating and cooling, and ex situ, after heating and quenching. Textures, phases, and glass compositions obtained were compared with those for rock samples from the vitrified part of the wall, as well as with equilibrium crystallization calculations. ‘Dark glass’ and its associated minerals formed from amphibolite or dolerite rocks melted at 1000–1200 °C under reducing atmosphere then slow cooled. ‘Clear glass’ formed from non-equilibrium partial melting of feldspar in granitoid rocks. This study aids archaeological forensic investigation of vitrified hillforts and interpretation of source rock material by mapping mineralogical changes and glass production under various heating conditions.

42 ENGINEERING↗
DOE OSTI2020

Mechanisms of Al3+ dimerization in alkaline solutions

The molecular speciation of aluminum (Al3+) in alkaline solutions is fundamental to its precipitation chemistry within a number of industrial applications that include ore renement and industrial processing of Al wastes. Under these conditions, Al3+ is predominantly Al(OH) {4 , while at high [Al] dimeric species also known to form. To date, the mechanism of dimer formation remains unclear and it is likely infuenced by complex ion ion interactions. In the present work, we investigate the role of ion pairing and a suite of potential dimerization pathways using a three-pronged approach that consists of density functional theory-based molecular dynamics (DFTMD), static DFT calculations (sDFT) and semi-empirical density functional tight binding molecular dynamics (SEMD). Specic cation eects imparted by the background electrolyte cations Na+, Li+ and K+ have been examined. Our simulations predict that when the Al species are ion paired with either cation the formation of the oxo-bridged Al2O(OH) 2{6 is favored with respect to the dihydroxo-bridged Al2(OH) 2{8 , in agreement with previousspectroscopic work. The formation of both dimers rst proceeds by bridging of two monomeric units via one hydroxo ligand, leading to a labile Al2(OH) 2{8 isomer. The eect of contact ion pairing of Li+ and K+ on the dimerization energetics is distinctly more favorable than that of Na+, which may have an impact on further ligomerization.

Pouvreau, Maxime↗
DOE OSTI2020

Molecular Examination of Ion-Pair Competition in Alkaline Aluminate Solutions Using In Situ Liquid SIMS

Understanding the structure and composition of aluminate complexes in extremely alkaline systems such as Bayer liquors has received enormous attentions due to its fundamental and industrial importance. However, obtaining direct molecular information of the underlying ion-ion interactions using traditional approaches such as NMR or Raman spectroscopy is challenging due to the weakness of these interactions and/or their complex overlapping spectral signatures. Here, we exploit in situ liquid secondary ion mass spectrometry (SIMS) as a new approach and show how it enables new insights. In contrast with traditional techniques, using SIMS we succeeded in acquiring information on dominant ion clusters in these alkaline systems. In Na + /K + mixed alkaline aluminate solutions we clearly observe preferential formation of Na + -anion clusters over K + -anion clusters. Further, evaluation of these clusters by density functional theory (DFT) calculations shows that these structures are stable and that their relative bond energies are consistent with their observed SIMS signal intensity differences. This demonstrates a key advantage of in situ liquid SIMS for overcoming ambiguities obscuring important information in these systems on constituent molecular clusters defined by relatively weak ion pair competition and ion-solvent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Influence of soluble oligomeric aluminum on precipitation in the Al-KOH-H2O system

The role of oligomeric aluminate (Al(OH)4-) species in the precipitation of aluminum phases such as gibbsite (a-Al(OH)3) from aqueous hydroxide solutions remains unclear and difficult to probe directly, despite its importance to developing accurate predictions of Al solubility in highly alkaline systems. Precipitation in this system entails a transition from predominantly tetrahedrally coordinated Al species in solution to octahedrally coordinated Al in gibbsite. Here we report a quantitative study of dissolved Al in the Al-KOH-H2O system using a combination of molecular spectroscopies. We established a relationship between changes in 27Al NMR chemical shifts and the relative intensity of Raman vibrational bands, indicative of variations in the ensemble speciation of Al in solution, and the formation of unique contact ion pair interactions with the aluminate dimer, Al2O(OH)62 . A strong correlation between the extent of Al oligomerization and the amount of solvated Al was demonstrated by systematically varying the KOH:Al molar ratio. The concentration of dissolved oligomeric Al in solution also directly impacted the particle size and morphology of gibbsite; high concentrations of dimeric Al2O(OH)62-, yielded smaller and more numerous anhedral to subhedral gibbsite particles, while low concentrations yielded fewer and larger euhedral gibbsite platelets. The collective observations suggest a key role of the Al2O(OH)62- dimer in promoting gibbsite precipitation from solution, where the potassium ion-paired dimer possibly catalyzes a more rapid transformation of Al coordination from tetrahedral in solution to octahedral in gibbsite.

Dembowski, Mateusz↗
DOE OSTI2020

Long-term Accumulation, Depth Distribution, and Speciation of Silver Nanoparticles in Biosolids-Amended Soils

Biosolids, when applied to soil, can be a source of metals and metal nanoparticles. One of the metals that forms nanoparticles is silver (Ag), which is commonly used in elemental (Ag(0)) form as an engineered nanomaterial in industrial or consumer products. The objective of this study was to quantify and characterize the accumulation and transport of Ag in a natural soil that has received agronomically-recommended rates of biosolids as fertilizer for the past 23 years (1994{2017). Total Ag concentrations were measured in biosolids and soil samples collected from 0 to 10 cm between 1996 and 2017. In addition, the depth distribution of Ag in the soil down to 60-cm depth was measured in 2017. Electron microscopy, in combination with X-ray spectroscopy, and X-ray absorption spectroscopy were used to identify the elemental association and oxidation state of the Ag in the samples. The Ag concentrations in the biosolids-amended soil increased steadily from 1996 until 2007, after which the concentrations leveled off at about 1.25 mg Ag kg-1 soil. This corresponded with a decrease of Ag concentrations in the biosolids over time. The majority of the Ag (82%) was confined to the top 10 cm of the soil, small amounts (14%) were detected in 10 to 20-cm depth, and trace amounts (4%) in 30 to 40-cm depth. The Ag in the biosolids and soil was identified as Ag-containing nanoparticles with a diameter of 10 to 12 nm. Ag was associated with S suggest that these 19 nanoparticles are Ag2S. This could be corroborated in biosolids with X-ray absorption spectroscopy (XANES); however, the Ag concentrations in the soil samples were too low to allow identification with XANES. Biosolids, when applied at agronomic rates in dryland cropping systems, represent an economically viable source of crop nutrients. In our study, long-term application of biosolids did not increase the concentration of total Ag in soil above a maximum of 1.5 mg Ag kg-1, and the Ag is present in the sulfide form. This concentration is below ecotoxicity limits for Ag2S in soil.

Taylor, Stephen E.↗
DOE OSTI2020

Generation and Characteristics of Plutonium and Americium Contaminated Soils Underlying Waste Sites at Hanford

In 2012, a Hanford site-wide review on plutonium and americium geochemistry (Cantrell and Felmy 2012) identified remaining research challenges associated with defining scientifically defensible end-states and supporting remediation decisions. Three research challenges were identified in this review: 1. Determine the transformations of Hanford Site sediments in response to changes in waste/groundwater composition. Significant mineralogical transformations can take place when wastes contact Hanford sediments. These transformations can significantly impact the solubility and acidic adsorption of plutonium and americium and possibly result in the generation of pseudo colloids that could facilitate plutonium/americium migration. 2. Assess the impact of changes in waste/groundwater chemistry on the potential for plutonium/americium solubilization or colloid formation. Changes in waste or groundwater chemistry can greatly impact the chemical form or speciation of plutonium and americium. Knowledge of plutonium and americium speciation will be crucial in terms of evaluating the potential for solubilization, adsorption or remobilization of adsorbed complexes, colloid formation, and colloid interactions with sedimentary minerals. 3. Establish the role of organic complexants and/or non-aqueous solvents in the transport of plutonium/americium in the deep subsurface. Plutonium has been found to be associated with TBP and the presence of non-aqueous solvents, at least in certain Z-9 sediments. It will be important to establish the role of non-aqueous solvent in past movement of plutonium and its potential role in future mobility. This report provides the technical basis for interpreting data obtained from field samples and will allow waste chemistry impacts on plutonium/americium re-mobilization mechanisms to be assessed. This report helps address the three previously identified research challenges – sediment transformations, solution chemistry impacts, and the role of organic complexants and solvents – in plutonium and americium contaminated Hanford sediments. Ultimately, these and potential future studies will lead to a defensible description of plutonium and americium mobility in relation to waste site conditions that can be interpreted to balance the risks posed by their migration and envisioned remediation activities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Niche Partitioning of Microbial Communities at an Ancient Vitrified Hillfort: Implications for Vitrified Radioactive Waste Disposal

A pre-Viking era vitrified hillfort, Broborg, provides a habitat analogue for disposed radioactive waste glass and shows strong niche partitioning among the organisms involved in glass alteration. Microbes cannot be eliminated from radioactive waste disposal facilities and the consequences of bio-colonization must be understood. We use Broborg as a model system to inform what microbial processes might influence long-term radioactive waste glass durability by examining anthropogenic glass that has been subjected to bio-colonization for over 1,500 years. Scanning electron microscopy (SEM) images reveal the surficial biofilm structure, and chemical/mineralogy analysis in combination with deoxyribonucleic acid (DNA) sequencing of samples from the vitrified substrate, the adjacent soil, and the general topsoil provide insight into niche partitioning. The ancient glass niche supports a unique microbial community of bacteria, fungi, and protists that manifests the species response to local geochemical and mineralogical conditions. Communities from the geochemical niche associated with the glass are distinct and less diverse than soil communities. The microbiome of the glass and adjacent soil are dominated by lichens, lichen-associated microorganisms, and other epilithic, endolithic, and epigeic organisms. Pseudomonads dominate the prokaryotic communities on the vitrified material, but not the adjacent soil. In contrast, the general topsoil communities are enriched in plant rhizosphere organisms. Taxa associated with vitrification have bio-corrosive properties that could be detrimental to glass durability, including silicate mineral dissolution, extraction of essential elements, secretion of geochemically reactive organic acids, and dissolution induced by improved water retention. However, these stable long-term biofilms also possess a homeostatic function that could limit glass alteration. Overall, this study demonstrates the potential impacts that microbial colonization and niche partitioning can have on glass alteration and subsequent release of radionuclides from a disposal facility for vitrified radioactive waste.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Nanoscale observations of Fe(ii)-induced ferrihydrite transformation

Because of its sorption properties, transformation of the nanomineral ferrihydrite (Fh) into more stable lepidocrocite (Lp) or goethite (Gt) has important impacts on the fate of metals, nutrients, and contaminants in soils/sediments. Although it is well known that the transformation rate is greatly accelerated under suboxic conditions by aqueous Fe(II), the enabling mass transfer process remains an ongoing debate among various mechanisms including dissolution/reprecipitation, solid-state recrystallization, and particle-mediated growth. In this paper, using electron microscopy, we examine the mineralogical evolution of 2-line Fh to Lp/Gt catalyzed by Fe(II) under strict anoxic conditions, including evaluation of Cl–SO 4 –HCO 3 anion effects. Emergence of Lp/Gt crystallites at the nanoscale was observed at ~20 min of reaction, earlier than previously reported. Lp is the first phase to nucleate in Cl-rich solutions without HCO 3 – ; whereas Lp and Gt concomitantly nucleate in SO 4 2– -rich solutions, and also when co-solute HCO 3 – is added. Lp crystallites nucleate as quasi-2D nanosheets one-unit-cell thick that contour the Fh surface; in contrast, rod-shaped (in Cl/SO 4 ) or acicular needle-shaped (in HCO 3 ) Gt crystals nucleate and grow radially outward from the Fh aggregates. Stages of transformation monitored by in situ μ-XRD coupled with aqueous Fe(II) uptake/release measurements are correlated with a short initial sorption stage followed by the onset of Lp/Gt growth that then progresses to Lp loss in favor of Gt. Microscopy data overwhelmingly support dissolution/reprecipitation as the underlying mechanism, including direct evidence for classical ion-by-ion Lp/Gt growth and Lp dissolution. The collective findings imply that the iron mass transfer through solution to distal Lp/Gt growth fronts is a critical enabling process facilitating rapid transformation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The role of surface hydroxyls on the radiolysis of gibbsite and boehmite nanoplatelets

Understanding mechanistic pathways to radiolytic hydrogen generation by metal oxyhydroxide nanomaterials is challenging because of the difficulties of distinguishing key locations of OH bond scission, from structural interiors to hydroxylated surfaces to physi-sorbed water molecules. In this work we exploited the interface-selectivity of vibrational sum frequency generation (VSFG) to isolate surface versus bulk hydroxyl groups for gibbsite and boehmite nanoplatelets before and after 60 Co irradiation at dose levels of approximately 7.0 and 29.6 Mrad. While high-resolution microscopy revealed no effect on particle bulk and surface structures, VSFG results clearly indicated up to 83% and 94% radiation-induced surface OH bond scission for gibbsite and boehmite, respectively, a substantially higher proportion than observed for interior OH groups by IR and Raman spectroscopy. Electron paramagnetic spectroscopy revealed that the major radiolysis products bound in the mineral structures are trapped electrons, O , O 2 – and possibly F-centers in gibbsite, and H , O and O 3 – in boehmite, which persist on the time frame of several months. The entrapped radiolysis products appear to be highly stable, enduring re-hydration of particle surfaces, and likely reflect a permanent adjustment in the thermodynamic stabilities of these nanomaterials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Hybrid Sorbents for 129 I Capture from Contaminated Groundwater

Radioiodine ( 129 I) poses a risk to the environment due to its long half-life, toxicity, and mobility. It is found at the U.S. Department of Energy Hanford Site due to legacy releases of nuclear wastes to the subsurface where 129 I is predominantly present as iodate (IO 3 – ). To date, a cost-effective and scalable cleanup technology for 129 I has not been identified, with hydraulic containment implemented as the remedial approach. Here, novel high-performing sorbents for 129 I remediation with the capacity to reduce 129 I concentrations to or below the US Environmental Protection Agency (EPA) drinking water standard and procedures to deploy them in an ex-situ pump and treat (P&T) system are introduced. Furthermore, this includes implementation of hybridized polyacrylonitrile (PAN) beads for ex-situ remediation of IO 3 – -contaminated groundwater for the first time. Iron (Fe) oxyhydroxide and bismuth (Bi) oxyhydroxide sorbents were deployed on silica substrates or encapsulated in porous PAN beads. In addition, Fe–, cerium (Ce)–, and Bi–oxyhydroxides were encapsulated with anion-exchange resins. The PAN–bismuth oxyhydroxide and PAN–ferrihydrite composites along with Fe- and Ce-based hybrid anion-exchange resins performed well in batch sorption experiments with distribution coefficients for IO 3 – of >1000 mL/g and rapid removal kinetics. Of the tested materials, the Ce-based hybrid anion-exchange resin was the most efficient for removal of IO 3 – from Hanford groundwater in a column system, with 50% breakthrough occurring at 324 pore volumes. The functional amine groups on the parent resin and amount of active sorbent in the resin can be customized to improve the iodine loading capacity. These results highlight the potential for IO 3 – remediation by hybrid sorbents and represent a benchmark for the implementation of commercially available materials to meet EPA standards for cleanup of 129 I in a large-scale P&T system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Iodine Immobilization by Materials through Sorption and Redox-Driven Processes: A Literature Review

Radioiodine-129 (129I) in the subsurface is mobile and limited information is available on treatment technologies. Scientific literature was reviewed to compile information on materials that could potentially be used to immobilize 129I through sorption and redox-driven processes, with an emphasis on ex-situ processes. Candidate materials to immobilize 129I include iron minerals, sulfur-based materials, silver-based materials, bismuth-based materials, ion exchange resins, activated carbon, modified clays, and tailored materials (metal organic frameworks (MOFS), layered double hydroxides (LDHs) and aerogels). Where available, compiled information includes material performance in terms of (i) capacity for 129I uptake; (ii) long-term performance (i.e., solubility of a precipitated phase); (iii) technology maturity; (iv) cost; (v) available quantity; (vi) environmental impact; (vii) ability to emplace the technology for in situ use at the field-scale; and (viii) ex situ treatment (for media extracted from the subsurface or secondary waste streams). Because it can be difficult to compare materials due to differences in experimental conditions applied in the literature, Part II of this review describes results of laboratory studies for selected materials using a standardized batch loading test.

Moore, Robert C.↗