Search NASA⌕ Search

Engineering topics

Pearson, John E.

Publications and source records attributed to Pearson, John E..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Light-induced Kondo-like exciton-spin interaction in neodymium(II) doped hybrid perovskite

Abstract Tuning the properties of a pair of entangled electron and hole in a light-induced exciton is a fundamentally intriguing inquiry for quantum science. Here, using semiconducting hybrid perovskite as an exploratory platform, we discover that Nd 2+ -doped CH 3 NH 3 PbI 3 (MAPbI 3 ) perovskite exhibits a Kondo-like exciton-spin interaction under cryogenic and photoexcitation conditions. The feedback to such interaction between excitons in perovskite and the localized spins in Nd 2+ is observed as notably prolonged carrier lifetimes measured by time-resolved photoluminescence, ~10 times to that of pristine MAPbI 3 without Nd 2+ dopant. From a mechanistic standpoint, such extended charge separation states are the consequence of the trap state enabled by the antiferromagnetic exchange interaction between the light-induced exciton and the localized 4 f spins of the Nd 2+ in the proximity. Importantly, this Kondo-like exciton-spin interaction can be modulated by either increasing Nd 2+ doping concentration that enhances the coupling between the exciton and Nd 2+ 4 f spins as evidenced by elongated carrier lifetime, or by using an external magnetic field that can nullify the spin-dependent exchange interaction therein due to the unified orientations of Nd 2+ spin angular momentum, thereby leading to exciton recombination at the dynamics comparable to pristine MAPbI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unidirectional microwave transduction with chirality selected short-wavelength magnon excitations

Nonreciprocal magnon propagation has recently become a highly potential approach of developing chip-embedded microwave isolators for advanced information processing. However, it is challenging to achieve large nonreciprocity in miniaturized magnetic thin-film devices because of the difficulty of distinguishing propagating surface spin waves along the opposite directions when the film thickness is small. In this work, we experimentally realize unidirectional microwave transduction with sub-micrometer-wavelength propagating magnons in a yttrium iron garnet (YIG) thin-film delay line. We achieve a non-decaying isolation of 30 dB with a broad field-tunable bandpass frequency range up to 14 GHz. The large isolation is due to the selection of chiral magnetostatic surface spin waves with the Oersted field generated from the coplanar waveguide antenna. Increasing the geometry ratio between the antenna width and YIG thickness drastically reduces the nonreciprocity and introduces additional magnon transmission bands. Furthermore, our results pave the way for on-chip microwave isolation and tunable delay line with short-wavelength magnonic excitations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis of antiferromagnetic Weyl semimetal Mn 3 Ge on insulating substrates by electron beam assisted molecular beam epitaxy

The antiferromagnetic kagome semimetals Mn 3 X (X = Ge, Sn, Ga) are of great interest due to properties arising from their Berry curvature, such as large anomalous Nernst and anomalous Hall coefficients, and spin to charge conversion efficiencies at ambient temperatures. However, the synthesis of epitaxial thin films of Mn 3 Ge in the desired hexagonal phase has been challenging because they do not wet insulating substrates, necessitating the use of a metallic buffer layer. Furthermore, a ferrimagnetic tetragonal phase also forms readily under typical growth conditions, interfering with hexagonal phase properties. We have synthesized atomically smooth and continuous epitaxial thin films of hexagonal Mn 3 Ge directly on insulating LaAlO 3 (111) substrates using electron beam assisted molecular beam epitaxy, using a three-step process that mitigates the formation of the tetragonal phase. The anomalous Nernst coefficient is found to be more than six times larger in our films than in sputtered thin films of Mn 3 Ge and significantly larger than that of Fe. Our approach can be used to grow thin layers of kagome materials, without interference from a buffer layer in transport properties, and may be applicable to a broader range of materials with large surface energies that do not grow readily on insulating substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Topological spin memory of antiferromagnetically coupled skyrmion pairs in Co/Gd/Pt multilayers

Antiferromagnetically (AFM) coupled skyrmions offer potential advantages for spintronic devices, including reduced dipolar fields that may enable smaller skyrmion sizes and a reduction of the skyrmion Hall effect. However, the topological stability of AFM-coupled skyrmions subjected to dramatic spin deformation through low-temperature cycling has not been investigated. We report the discovery of a topological spin memory effect for AFM-coupled skyrmion pairs in [Co/Gd/Pt](10) multilayered films. Photoemission electron microscopy imaging shows that bubble skyrmions in the multilayer that are stable at room temperature evolve into complex in-plane spin textures as the temperature is lowered and reform completely when the sample is warmed back up. Simulations demonstrate that Dzyaloshinskii-Moriya interactions play a key role in this spin memory effect, and furthermore reveal that the topological charge is preserved throughout the dramatic spin texture rearrangement and recovery. These results highlight a key aspect of topological protection-the preservation of the topological properties under continuous deformation-and also provide a promising avenue for information encryption and recovery.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Large exotic spin torques in antiferromagnetic iron rhodium.

Spin torque is a promising tool for driving magnetization dynamics for computing technologies. These torques can be easily produced by spin-orbit effects, but for most conventional spin source materials, a high degree of crystal symmetry limits the geometry of the spin torques produced. Magnetic ordering is one way to reduce the symmetry of a material and allow exotic torques, and antiferromagnets are particularly promising because they are robust against external fields. We present spin torque ferromagnetic resonance (ST-FMR) measurements and second harmonic Hall measurements characterizing the spin torques in anti -ferromagnetic iron rhodium alloy. We report extremely large, strongly temperature-dependent exotic spin torques with a geometry apparently defined by the magnetic ordering direction. We find the spin torque efficiency of iron rhodium to be (207 +/- 94)% at 170 K and (88 +/- 32)% at room temperature. We support our conclusions with theoretical calculations showing how the antiferromagnetic ordering in iron rhodium gives rise to such exotic torques.

Gibbons, Jonathan↗
DOE OSTI2022

Performance and characterization of the SPT-3G digital frequency-domain multiplexed readout system using an improved noise and crosstalk model

The third-generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5× expansion in the readout operating bandwidth has enabled the use of this large focal plane, and SPT-3G performance meets the forecasting targets relevant to its science objectives. However, the electrical dynamics of the higher-bandwidth readout differ from predictions based on models of the SPTpol system due to the higher frequencies used and parasitic impedances associated with new cryogenic electronic architecture. To address this, we present an updated derivation for electrical crosstalk in higher-bandwidth DfMUX systems and identify two previously uncharacterized contributions to readout noise, which become dominant at high bias frequency. The updated crosstalk and noise models successfully describe the measured crosstalk and readout noise performance of SPT-3G. These results also suggest specific changes to warm electronics component values, wire-harness properties, and SQUID parameters, to improve the readout system for future experiments using DfMUX, such as the LiteBIRD space telescope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Electric field control of magnon spin currents in an antiferromagnetic insulator

Pure spin currents can be generated via thermal excitations of magnons. These magnon spin currents serve as carriers of information in insulating materials, and controlling them using electrical means may enable energy efficient information processing. Here, we demonstrate electric field control of magnon spin currents in the antiferromagnetic insulator Cr 2 O 3 . We show that the thermally driven magnon spin currents reveal a spin-flop transition in thin-film Cr 2 O 3 . Crucially, this spin-flop can be turned on or off by applying an electric field across the thickness of the film. Using this tunability, we demonstrate electric field–induced switching of the polarization of magnon spin currents by varying only a gate voltage while at a fixed magnetic field. We propose a model considering an electric field–dependent spin-flop transition, arising from a change in sublattice magnetizations via a magnetoelectric coupling. These results provide a different approach toward controlling magnon spin current in antiferromagnets.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconducting diode effect via conformal-mapped nanoholes

A superconducting diode is an electronic device that conducts supercurrent and exhibits zero resistance primarily for one direction of applied current. Such a dissipationless diode is a desirable unit for constructing electronic circuits with ultralow power consumption. However, realizing a superconducting diode is fundamentally and technologically challenging, as it usually requires a material structure without a centre of inversion, which is scarce among superconducting materials. Here, we demonstrate a superconducting diode achieved in a conventional superconducting film patterned with a conformal array of nanoscale holes, which breaks the spatial inversion symmetry. We showcase the superconducting diode effect through switchable and reversible rectification signals, which can be three orders of magnitude larger than that from a flux-quantum diode. The introduction of conformal potential landscapes for creating a superconducting diode is thereby proven as a convenient, tunable, yet vastly advantageous tool for superconducting electronics. This could be readily applicable to any superconducting materials, including cuprates and iron-based superconductors that have higher transition temperatures and are desirable in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular beam epitaxy of PdO on MgO (001)

PdO, widely used in catalysis in powder form for decades, has been predicted recently to be a Dirac semimetal. Synthesis of high-quality single crystals of this material is thus of great interest. Here, by using ozone-assisted molecular beam epitaxy, PdO thin films were grown on a MgO (001) substrate. X-ray diffraction and transmission electron microscopy indicate the film is a / b axis oriented, with the c axis lying in plane. Fully oxygenated PdO films have a low density of holelike carriers, and are insulating at the lowest temperatures. Our density functional theory calculations using the Heyd-Scuseria-Ernzerhof exchange-correlation functional suggest a ~1.0 eV band gap at the M point, where the gap can be reduced by tensile strain along the c axis and the bands begin to invert when the tensile strain is as high as 18%. Although tensile strain of this magnitude is experimentally not viable using epitaxy, electrons can be doped by oxygen reduction. Finally, our results emphasize the need for careful consideration of electron correlation effects and stoichiometry in ab initio modeling of topological semimetals involving transition metal oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Temperature-dependent collective magnetization reversal in a network of ferromagnetic nanowires

The collective behavior of geometrically frustrated magnetization in connected networks of ferromagnetic nanowires, known as artificial spin ice, leads to complex magnetotransport behavior in those structures. Here, we present temperature- and current-dependent magnetotransport studies on a connected square artificial spin-ice system and correlate our observations to micromagnetic simulations. We find that the field at which the lattice magnetization collectively switches increases as the temperature is lowered. Our experimental findings highlight the importance of the global and local temperatures for the onset of a collective magnetization reversal in the connected system. These studies may also provide useful insights into novel storage concepts and applications in neuromorphic computing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct Imaging of Resonant Phonon-Magnon Coupling

Detection of phonons is critical for research on the interconversion between resonantly coupled magnons and phonons. Here we report the direct visualization of the resonant coupling of magnons and phonons by microfocused Brillouin light scattering on the Ni/Li Nb O 3 hybrid heterostructure. The static patterns of surface acoustic wave phonons, originating from the interference between the incident wave ψ 0 (A 0 , k, φ 0 ) and reflected wave ψ 1 (A 1 , - k, φ 1 ), can be modulated by magnetic field due to the magnon-phonon coupling. By analyzing the information of phonons obtained from Brillouin spectroscopy, the properties of the magnon system (Ni film), e.g., ferromagnetic resonance field and resonance linewidth, can be determined. The results provide spatially resolved information about phonon manipulation and detection in a coupled magnon-phonon system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Distinguishing antiferromagnetic spin sublattices via the spin Seebeck effect

We measured spin Seebeck signals at the top and bottom surfaces of an antiferromagnetic Cr 2 O 3 film, using a Pt/Cr 2 O 3 /Pt trilayer. Our experimental data, combined with micromagnetic simulations, clearly demonstrate that the uncompensated sublattice at the top and bottom surfaces plays a decisive role in determining the symmetry of the spin Seebeck signals, providing fundamental insight for understanding the generation of spin Seebeck signal in antiferromagnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Reconfigurable Pinwheel Artificial-Spin-Ice and Superconductor Hybrid Device

The ability to control the potential landscape in a medium of interacting particles could lead to intriguing collective behavior and innovative functionalities. In this work, we utilize spatially reconfigurable magnetic potentials of a pinwheel artificial-spin-ice (ASI) structure to tailor the motion of superconducting vortices. The reconstituted chain structures of the magnetic charges in the pinwheel ASI and the strong interaction between magnetic charges and superconducting vortices allow significant modification of the transport properties of the underlying superconducting thin film, resulting in a reprogrammable resistance state that enables a reversible and switchable vortex Hall effect. Our results highlight an effective and simple method of using ASI as an in situ reconfigurable nanoscale energy landscape to design reprogrammable superconducting electronics, which could also be applied to the in situ control of properties and functionalities in other magnetic particle systems, such as magnetic skyrmions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Molecular beam epitaxy of the magnetic Kagome metal FeSn on LaAlO 3 (111)

Materials with Kagome layers are expected to give rise to rich physics arising from band structures with topological properties, spin liquid behavior, and the formation of Skyrmions. Until now, most work on Kagome materials has been performed on bulk samples due to difficulties in thin film synthesis. Here, by using molecular beam epitaxy, layered Kagome-structured FeSn films are synthesized on the (111) oriented LaAlO3 substrate. Both in situ and ex situ characterizations indicate that these films are highly crystalline and c-axis oriented, with atomically smooth surfaces. The films grow as disconnected islands, with lateral dimensions on the micron meter scale. By patterning Pt electrodes using a focused electron beam, the longitudinal and transverse resistance of single islands have been measured in magnetic fields. Our work opens a pathway for exploring mesoscale transport properties in thin films of Kagome materials and related devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Large anomalous Nernst and inverse spin-Hall effects in epitaxial thin films of kagome semimetal Mn 3 Ge

Synthesis of crystallographically well-defined thin films of topological materials is important for unraveling their mesoscale quantum properties and for device applications. Mn 3 Ge , an antiferromagnetic Weyl semimetal with a chiral magnetic structure on a kagome lattice, is expected to have enhanced Berry curvature around Weyl nodes near the Fermi energy, leading to large anomalous Hall/Nernst effects and a large spin-Hall effect. Using magnetron sputtering, we have grown epitaxial thin films of hexagonal D 0 19 Mn 3 Ge that are flat and continuous. Large anomalous Nernst and inverse spin-Hall effects are observed in thermoelectric and spin-pumping devices. The anomalous Nernst signal in our Mn 3 Ge films is estimated to be 0.1 μV/K and is comparable to that in ferromagnetic Fe, despite Mn 3 Ge having a weak magnetization of ~ 3.5 m μ B / Mn at room temperature. In this work, the spin-mixing conductance is 90.5 nm – 2 at the Py / Mn 3 Ge interface, and the spin-Hall angle in Mn 3 Ge is estimated to be about eight times of that in Pt.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Detecting Phase-Resolved Magnetization Dynamics by Magneto-Optic Effects at 1550 nm Wavelength

We demonstrate the detection of phase-resolved magnetization dynamics with combinatorial magneto-optic Kerr and Faraday effects. The method uses a continuous-wave laser that is amplitude-modulated at the spin dynamic frequencies, and thus allows for coherent tracking of the spin dynamics, akin a “lock-in” type measurement. In particular, our method, using a single 1550-nmwavelength, probes simultaneously the ferromagnetic resonance of Y 3 Fe 5 O 12 (YIG) and Permalloy (Py = Ni 80 Fe 20 ) in a YIG-Pyhetero structure. The fiber-based magneto-optic components also have the advantage of being made into a compact, tabletop or even portable system with yet robust measurement performances. We believe that our method will be found useful in studying hybrid quantum magnonic systems and/or investigating phase-resolved spin dynamics in nanomagnet structures involving both ferromagnetic insulators and metals.

42 ENGINEERING↗
DOE OSTI2020

Phonon Transport Controlled by Ferromagnetic Resonance

The resonant coupling of phonons and magnons is important for the interconversion of phononic and spin degrees of freedom. We study the phonon transmission in LiNbO 3 manipulated by the dynamic magnetization in a Ni thin film. It is observed that the phonons can be absorbed strongly through resonant magnon-phonon coupling, which is realized by our modifying the magnon-phonon coupling within the Ni itself as well as our optimizing the interfacial coupling between Ni and LiNbO 3 . The line shapes of phonon transmission are further investigated considering the magnon-phonon interconversion in the elastically driven ferromagnetic resonance process. The results promote unique routes for phonon manipulation and detection in the presence of magnetization dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗