Search NASA⌕ Search

Engineering topics

Pecharsky, V. K.

Publications and source records attributed to Pecharsky, V. K..

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Magnetic ordering in Eu 2 In and Eu 2 Sn

Eu 2 In and Eu 2 Sn crystallize in the orthorhombic Co 2 Si-type structure (oP12, Pnma, No. 62) with In and Sn atoms occupying one 4c site and the Eu atoms filling two other 4c sites. Eu 2 In has a nearly ideal first-order magnetostructural transition (FOMT) at 55 K with a hysteresis of less than 0.1 K, a large entropy change and an adiabatic temperature change of 5.0 K in a field of 2 T. The anhysteretic nature of the FOMT is likely due to there being no change in cell symmetry and relatively small changes in the lattice parameters. There is no magnetostructural transition in Eu2Sn. In this work we present the results of powder neutron diffraction, magnetization, and Eu Mössbauer spectroscopy aimed to investigate the nature of magnetic order for both Eu 2 In and Eu 2 Sn. The Eu Mössbauer spectrum of Eu 2 In at 5 K shows two equal area components, consistent with Eu occupying two equal multiplicity crystallographic sites. However, the different hyperfine fields (B) of 27 T and 17 T suggest that the magnetic environments of the Eu moments on the two 4c sites are different. Neutron diffraction data at 2.5 K show that in Eu 2 In the order is ferromagnetic, with Eu moments on both Eu sites oriented parallel to the a-axis; moment values of 6.8 μB and 6.5 μB were found. For Eu 2 Sn measurements find two antiferromagnetic transitions, which are corroborated by neutron diffraction. Analysis of density-functional theory calculations shows negligible energy difference between differing magnetic configurations, indirectly supporting stability of multiple magnetic structures observed experimentally. While the transition at T N1 = 30 K corresponds to the formation of a simple k 1 = 0 antiferromagnetic structure with Eu-moments pointing along the b-axis, at T N2 = 13 K a coexisting second magnetic order with k 2 = [0, ½, ½] appears.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fathoming the anisotropic magnetoelasticity and magnetocaloric effect in GdNi

Intermetallic GdNi adopts a CrB type of crystal structure (space group Cmcm), and it orders ferromagnetically via a second-order phase transition at 70 K, exhibiting unusually strong spontaneous striction along the three independent crystallographic axes in the ferromagnetically ordered state. Here we introduce a microscopic model to describe anisotropic changes of lattice parameters and elastic contribution to magnetocaloric effect of GdNi. In the model, results of density functional theory (DFT) calculations are used as inputs into a Hamiltonian that includes elastic energy of an anisotropic crystal lattice, exchange interactions, and Zeeman effect. The magnetic and elastic Hamiltonians are coupled through an anisotropic Bean-Rodbell model of magnetoelastic interactions. This coupling gives rise to anisotropic changes in the lattice parameters observed experimentally, and the model reveals good to reasonable agreements between the current theoretical results and earlier experimental data, thus validating the model within the limits of assumptions made. We also show that DFT calculations with 4f electrons of Gd treated as core electrons lead to a more adequate estimate of elastic constants of GdNi in comparison with the LDA + U method where 4f electrons are treated as valence electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Synthesis and magnetic properties of LaFe 13- x - y M x Si y N 3 nitrides

Here, single-phase LaFe 13-x-y M x Si y N 3 compounds (M = Mn) were synthesized by subjecting intermetallic precursors to the ammonia flow at 623 K for 4 h. The nitrides derived from Si-poor (y ≤ 3) cubic intermetallics retain the NaZn 13 -type crystal structure and show considerable (~3 %) lattice expansion compared to the nitrogen-free materials. The temperatures of the magnetic ordering transitions, all of which are second order, increase by ~ 200 K as a result of nitrogenation, and all nitrides exhibit rather weak and broad magnetocaloric effects. The nitrides are stable below 750 K, but they begin to lose nitrogen above this temperature, fully decomposing above 1050 K. The nitrogenation of the tetragonal LaFe 9 Si 4 results in the decomposition of the intermetallic phase and formation of the Fe 3 N compound together with unidentified amorphous phase(s).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anomalous electrical transport behavior in the vicinity of the first-order magnetostructural transition in the giant magnetocaloric Gd 4 ScGe 4

Here, magnetic, specific heat, and electrical transport measurements of Gd 4 ScGe 4 single crystals reveal sharp, discontinuous, nearly anhysteretic first-order magnetostructural transformation at $T_C$ = 63 K. The electrical resistivity exhibits two distinct regions where it increases with decreasing temperature: between $T_C$ and 120 K, as well as below 3 K; electronic transport remains conventionally metallic at all other measured temperatures, up to 325 K. The dispersion of charge carriers due to electron-paramagnon scattering is the likely reason for the observed anomalous transport above $T_C$. Additionally, the existence of intermediate lattice states near the transition recognized by the spike in the interslab Ge-Ge distances is expected to reduce the mean free path of the electrons contributing to the unusual behavior of the electrical resistivity between $T_C$ and 120 K. Beyond conventional electronic and lattice terms, the third component of likely magnetic origin contributes to the low-temperature heat capacity; the presence of spin waves may be responsible for the increased electron-magnon scattering below 3 K. Minor magnetocrystalline anisotropy is observed with the b axis as the easy magnetization axis in Gd 4 ScGe 4 . A negative deviation from linearity in the temperature dependence of the inverse magnetic susceptibility is detected below 150 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Correlating Crystallography, Magnetism, and Electronic Structure Across Anhysteretic First-Order Phase Transition in Pr 2 In

Here, temperature-dependent powder X-ray diffraction and magnetization measurements of Pr 2 In conclusively prove that the unusual anhysteretic first-order paramagnetic-ferromagnetic phase transition in the compound is related to concurrent changes in both the magnetic and crystallographic lattices. At the same time, the hexagonal Ni 2 In-type structure is stable at least between 6 and 298 K, including at T C = ~57 K. From the density functional theory calculations, the electronic structure of the compound is extraordinarily sensitive to minor changes in lattice parameters that occur across the phase transition, revealing the origin of strong magnetoelastic coupling. In the vicinity of T C , the maximum entropy change, ΔS Max = -16 J Kg -1 K -1 induced by a moderate magnetic field change of 20 kOe (ΔS Max = -20 J Kg -1 K -1 for 50 kOe magnetic field change) is comparable to other known potentially functional materials demonstrating large cryogenic magnetocaloric effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Magnetothermal properties of Ho 1-x Dy x Al 2 (x = 0, 0.05, 0.10, 0.15, 0.25 and 0.50) compounds

Magnetic and magnetocaloric properties of H o 1 - x D y x A l 2 compounds with x = 0 , 0.05 , 0.10 , 0.15 , 0.25 and 0.50 , modelled using a Hamiltonian that includes the exchange interactions between Ho-Dy, Ho-Ho and Dy-Dy ions in addition to the crystalline electric field and the Zeeman effects, have been compared with those determined experimentally. In order to reproduce experimentally observed global ferromagnetic ordering temperatures and spin reorientation transition temperatures as x Dy varies, the exchange interactions between Ho-Dy and Ho-Ho were set as free parameters and adjusted to match the experimental results. We demonstrate that heat capacity of polycrystalline materials in non-zero magnetic fields can be satisfactory reproduced by using the average of multiple magnetic field directions with respect to the crystallographic coordinate system, while reasonably good agreement between experimentally determined and theoretically predicted magnetocaloric effects can be achieved considering an average of only three field directions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Indium segregation in Gd 5 (Si, Ge) 4 magnetocaloric materials

Chemical substitution is one of the most efficient tools to tune and optimize magnetic and magnetocaloric properties of the giant magnetocaloric materials. In particular, Indium substitutions could be useful both for tuning properties of these interesting intermetallic materials and to unveil their local-scale behavior across the magnetostructural transition via hyperfine techniques. Hence, in order to investigate the effect of Indium additions on the crystal structure, micro-structure, magnetic and magnetocaloric properties, a series of In-containing samples derived from the base Gd 5 Si 1.2 Ge 2.8 stoichiometry were prepared. Here, the major findings are that while In is insoluble in the 5:4 phase, it will instead promote the emergence of the impurity 5:3 phase and segregates into this phase. Hence, In leads to major crystallographic changes, which enhance atomic disorder and disrupt the Si to Ge ratio in the 5:4 phase. Subsequently, a higher 5:4 unit cell volume and a lower magnetic ordering temperature are found in the In-substituted samples. Finally, the magnetocaloric properties of the In-substituted samples reveal a detrimental effect on the maximum magnetic entropy change.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Controlling magnetostructural transition and magnetocaloric effect in multi-component transition-metal-based materials

Proper coupling between structural and magnetic transitions is critical for the emergence and control of magnetocaloric effects in solids. We examine the influence of minor substitutional doping (replacing Mn by Cr and Al by Sn) and interstitial doping with B on the magnetic, structural, and magnetocaloric properties of recently discovered Mn 0.5 Fe 0.5 NiSi 0.94 Al 0.06 alloy exhibiting a giant magnetocaloric effect near room temperature. We demonstrate that magnetocaloric properties of the base compound can be controlled and, in some cases, improved by chemical substitutions. First-principles computations elucidate how small changes in the composition affect properties in this family of compounds and, thus, provide useful guidance for the selection of suitable doping elements for such materials. Here the magnetic-field-induced entropy change measured for Mn 0.5 Fe 0.5 NiSi 0.94 Al 0.06 B 0.005 is –22 J/kg K near room temperature for the applied magnetic field of 2 T, and it is among the highest known values for this class of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetoelastic transition and magnetocaloric effect in induction melted Fe 100-x Rh x bulk alloys with x = 50, 51

Magnetoelastic transitions (METs) in bulk in nearly equiatomic Fe-Rh alloys produced by arc melting may show poor reproducibility related to insufficient chemical homogeneity and presence of impurity phases in variable concentrations. To better understand the synthesis conditions that reliably yield bulk FeRh materials with reproducible MET characteristics, Fe 100-x Rh x alloys with x = 50, 50.5 and 51 at. % were prepared by induction melting and thermal annealing under identical conditions. The fabricated samples were cut into several slices, followed by characterization of METs in each of the slices using isothermal and isofield magnetization measurements, differential scanning calorimetry, and direct measurements of the magnetocaloric effect. All of the slices exhibit METs between the AFM and FM states, but the transitions are abrupt with nearly the same change of magnetization, ΔM, when x = 50.5 and 51, whereas for the x = 50 alloy the transition spreads over a wide temperature interval and ΔM may fluctuate by as much as 10 % from one specimen to another. A comparison of the magnetocaloric responses of x = 50 and 51 materials is presented. The clearly different effect of the magnetic field on the transition in both directions leads to significant differences in the reversibility and maximum values of the magnetic field-induced entropy and adiabatic temperature changes, as well as average hysteresis losses. In terms of reproducibility, our results suggest that induction melting is a more appropriate technique to prepare these binary alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetothermal properties of Tm x Dy 1- x Al 2 ( x = 0.25, 0.50 and 0.75)

Here, we describe magnetic, thermal, and magnetocaloric properties of rare earth intermetallic compounds Tm x Dy 1-x Al 2 with 0.25, 0.5 and 0.75. Using model Hamiltonian we consider contributions of the crystalline electric field anisotropy in both Tm and Dy magnetic sublattices, disorder in exchange interactions among Tm-Tm, Dy-Dy and Tm-Dy magnetic ions, and the Zeeman effect. Employing earlier reported and new experimental measurements, we first determine a single free variable – the intersublattice magnetic exchange parameter – to properly model the temperature and magnetic field dependencies of heat capacity and magnetization, and then use the modeling results to explain the emergence of an anomalous spin reorientation transition and its influence on the magnetocaloric effect in the title compounds. Theoretical results agree with experimental data reasonably well.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Free-energy analysis of the nonhysteretic first-order phase transition of Eu 2 In

Binary intermetallic Eu 2 In was recently reported to exhibit a giant anhysteretic magnetocaloric effect due to a first-order magnetic phase transition between paramagnetic and ferromagnetic states. Experimentally, the transition occurs with a small phase volume change, ΔV/V, of approximately 0.1% around T C of ca. 55 K. We representmagnetic and computemagnetocaloric properties of a Eu 2 In compound using a microscopic description based on a model Hamiltonian that takes into account magnetic exchange and magnetoelastic interactions. In the model the thermodynamic nature of the transition is conveniently represented by a single magnetoelastic interaction parameter. We report a good agreement between the theoretical results and earlier published experimental data confirms the effectiveness of our approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Crystal structure and physical properties of Yb 2 In and Eu 2–x Yb x In alloys

While binary R E 2 In , where R E = rare earth , have been reported a few decades ago, recent investigations revealed intriguing new physical insights. For instance, the discovery of a nearly ideal first-order ferromagnetic transition in Eu 2 In calls for further exploration of structures and properties of R E 2 In , in particular for the least-documented R E = Eu and Yb cases. In this work, we investigate Eu 2 – x Yb x In pseudobinaries with nominal values of x = 0.25 , 0.5, 0.75, 1, 1.5, 2 by powder x-ray diffraction (including as function of temperature from 100 to 375 K for Yb 2 In ), magnetization (5–300 K), as well as electrical resistivity (5–300 K) and calorimetric (2–150 K) measurements for Yb 2 In . Compared to other RE , Yb or Eu always raise challenging questions linked to their valence states. From average atomic volume, Yb is anticipated to be divalent in Yb 2 In , at least between 100 and 375 K, which is in line with the absence of 4 f magnetism. In agreement with x-ray diffraction and magnetization data, the resistivity of Yb 2 In is rather featureless and typical of a metal. Establishing Yb 2 In as a nonmagnetic isostructural reference for Eu 2 In allows one to use its heat capacity to revisit that of the latter, and get experimental insights into the exceptional magnetocaloric effect of the compound with Eu. In particular, we show that a third of the total magnetic entropy ( S m ≈ 35.6 J mo l – 1 K – 1 at T = 100 K ) is concentrated in a 3 K temperature window around the T C of Eu 2 In . Starting from the ferromagnetic compound Eu 2 In [ T C = 55.2 ( 5 ) K ] , we show that Yb substitutions in Eu 2 – x Yb x In lead to a decrease in both the Curie temperature [ T C = 41 ( 2 ) and 32(2) K for x = 0.25 and 0.5] and magnetic saturation, while weakening the first-order character of the transition as x increases. A significant isothermal entropy change of 5.1 ( 4 ) J mo l – 1 K – 1 for Δ B = 2 T is found at 44 K in Eu 1.75 Yb 0.25 In , demonstrating that the giant magnetocaloric effect of Eu 2 In can be tuned to lower temperatures by Yb substitutions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

First-order magnetic phase transition in P r 2 In with negligible thermomagnetic hysteresis

Magnetic first-order phase transitions are key for the emergence of functionalities of fundamental and applied significance, including magnetic shape memory as well as magnetostrictive and magnetocaloric effects. Such transitions are usually associated with thermomagnetic hysteresis. In this paper we report the observation of a firstorder transition in Pr 2 In from a paramagnetic to a ferromagnetic state at $T_C$ = 57K without a detectable thermomagnetic hysteresis, which is also accompanied by a large magnetocaloric effect. The peculiar electronic structure of Pr2In exhibiting a large density of states near the Fermi energy explains the highly responsive magnetic behavior of the material. The magnetic properties of Pr 2 In are reported, including observation of another (second-order) magnetic transition at 35 K.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic and transport behaviors of non-centrosymmetric Nd 7 Ni 2 Pd

Crystallographic, magnetic, electrical transport and thermodynamic properties of pseudo-binary Nd 7 Ni 2 Pd compound have been studied using temperature-dependent x-ray powder diffraction and physical property measurements. Compared to the ferromagnetic parent Nd 7 Pd 3 , the ground state of Nd 7 Ni 2 Pd is antiferromagnetic, and it exhibits strong metamagnetism. The measurements indicate two antiferromagnetic transitions in fields less than 8 kOe: a second-order paramagnetic to antiferromagnetic at T N2 = 29 K and a weak first-order antiferromagnetic to antiferromagnetic transition at T N1 = 24.5 K. Here, the compound becomes ferromagnetic in fields of 8 kOe and higher with T C = 30 K. Temperature dependence of lattice parameters is anomalous, most prominently in the basal plane at ~30 K; however, there is no detectable structural distortion or clear volume discontinuity around 25 K, suggesting a significant weakening of the first-order transition when compared to the binary Nd 7 Pd 3 .

36 MATERIALS SCIENCE↗