Search NASA⌕ Search

Engineering topics

Peggy O'Neill

Publications and source records attributed to Peggy O'Neill.

14 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

P- and L-Band Retrieval of Subsurface Soil Moisture and Temperature Profiles as First-Order Polynomial Function

This paper demonstrates the potential use of P and L band passive measurements to determine root zone soil moisture (SM) and soil temperature(ST). SM and ST data have been taken as a function of depth during the NASA GSFC PLEX19 experiment in the summer of 2019 at Beltsville, MD, USA. Using these data, a coherent model has been used to compute H and V brightness temperatures at frequencies of 0.8 and 1.4 GHz with an observation angle of 35 degrees. These synthetic brightness data are then used to estimate the SM and ST profiles which are represented by linear polynomials. The inversion problem is formulated as a least square problem that is solved by a global optimization method known as the Adaptive Simulated Annealing(ASA) method. Four inversion examples having different SM and ST profiles are presented. Selected results show that the standard deviation between the retrieved and measured data is less than 0.077 cm3/cm3 for SM, and 2.245 °C for ST.

Ming Li↗
NASA NTRS2022

Thermal Hydraulic Disaggregation of SMAP Soil Moisture Over the Continental United States

Thermal Hydraulic disaggregation of Soil Moisture (THySM) algorithm was implemented to downscale NASA’s Soil Moisture Active Passive (SMAP) Enhanced soil moisture (SM) product to 1 km over the continental United States (CONUS). This algorithm was developed by combining thermal inertia theory with a soil hydraulic-based approach that considers fine-scale SM spatial distribution driven by both heat fluxes and hydraulic conductivity in soils. Relative soil wetness values were estimated using land surface temperature and normalized difference vegetation index for the thermal inertia model and using soil properties for the hydraulic model. The relative soil wetness values at 1 km from both models were then combined by using weighting functions whereby the spatial distribution of SM was governed more by thermal fluxes during times of strong heat transport and infiltration during moisture abundant soil conditions. THySM values were evaluated using in situ SM measurements from SMAP Core Validation Sites (CVS), the USDA Soil Climate Analysis Network, and the NOAA Climate Reference Network over CONUS. THySM shows higher accuracy than the SMAP / Sentinel-1 (SPL2SMAP_S) 1 km SM product when compared to in situ measurements. The accuracy of THySM is 0.048 m3/m3 based on unbiased root mean square error (ubRMSE), outperforming SPL2SMAP_S by 0.01-0.02 m3/m3. The ubRMSE of THySM 1km SM over the SMAP grassland/rangeland-dominated CVS sites is better than 0.04 m3/m3, which meets the SMAP mission SM accuracy requirement applied at 9 and 36 km.

SMAP↗
NASA NTRS2021

Regularized Dual-Channel Algorithm for the Retrieval of Soil Moisture and Vegetation Optical Depth from SMAP Measurements

In August 2020, SMAP released a new version of its soil moisture (SM) and vegetation optical depth (VOD) retrieval products. In this work, we review the methodology followed by the SMAP regularized dual-channel (DCA) retrieval algorithm. We show that the new implementation generates SM retrievals that not only satisfy the SMAP accuracy requirements but also show a performance comparable to the single-channel algorithm that uses the V polarized brightness temperature (SCA-V). Due to a lack of in situ measurements we cannot evaluate the accuracy of the VOD. In this work, we show analyses with the intention of providing an understanding of the VOD product. We compare the VOD results with those from SMOS. We also study the relation of the SMAP VOD with two vegetation parameters: tree height and biomass.

Julian Chaubell↗
NASA NTRS2021

Reflectivity, Emissivity, and Brightness from Multilayered Soil with Linearly Varying Permittivity at P- and L- bands

Passive sensing of root zone soil moisture is theoretically investigated using P and L band frequencies. The soil is considered to be a stratified medium. The reflectivity from the soil surface is found by considering the soil to be composed of a finely layered structure with layer widths that are small compared to a wavelength. A well-known transmission line algorithm is then used to compute the reflectivity at the surface. Emissivity is obtained as (1 – reflectivity). It assumed that the soil is at a constant temperature of 300o K when determining the brightness temperature. A soil moisture profile consisting of two homogeneous layers separated by a layer of linearly varying soil moisture is investigated. The study is made at an incident angle of 40O for horizontal polarization at 0.8 and 1.4 GHz. Two variations of the basic profile are considered: a transition from a layer of lesser moisture to a layer of greater moisture and the opposite. In both cases the P band signal shows greater penetration than the L band case. There is greater penetration in the transition to drier soils. In both cases the L band signals show sensitivity to only the upper surface of the soil as expected.

Ming Li↗
NASA NTRS2021

Comparison of soil dielectric mixing models for Soil Moisture Retrieval using SMAP Brightness Temperature over croplands in India

The accurate estimation of soil moisture (SM) using microwave remote sensing depends mostly on careful selection of retrieval parameters among which the soil dielectric mixing model is the important one. These models are often categorized into empirical, semi-empirical or volumetric based on their methodologies and input data requirements. To study in detail, the comparative performance of four dielectric mixing models -- Wang & Schmugge model, Hallikainen model, Dobson model and Mironov model were used with Soil Moisture Active Passive (SMAP) L-band brightness temperature and Single Channel Algorithm for SM retrieval over agricultural landscapes in India. The highest performance statistics combination in terms of Root Mean Square Error (RMSE), correlation coefficient (R^(2)) and percentage bias (PBIAS) against the concurrent in-situ SM measurements were calculated at the selected validation sites. The overall results indicate that the best performance was given by the Mironov model (RMSE = 0.07 cu. m/cu. m), followed by Wang & Schmugge model (RMSE = 0.08 cu. m3/cu. m), Hallikainen model (RMSE = 0.09 cu. m/cu. m), Dobson model (RMSE = 0.10 cu. m/cu. m) and original SMAP radiometer SM (RMSE = 0.12 cu. m/cu. m). Findings of this study provides important insights into application and performance of dielectric mixing models in mapping surface SM variations. This study also underlines the pivotal role of local conditions for SM retrieval which should be carefully included in the algorithms.

Swati Suman↗
NASA NTRS2021

Assessing Disaggregated SMAP Soil Moisture Products in the United States

A soil moisture (SM) disaggregation algorithm based on thermal inertia (TI) theory was implemented to downscale the Soil Moisture Active Passive (SMAP) Enhanced product(SPL2SMPE) from 9 km to 1 km over the continental United States. The algorithm applies land surface temperature and normalized difference vegetation index from Moderate Resolution Imaging Spectroradiometer (MODIS) at higher spatial resolution to estimate relative soil wetness within a coarse SMAP grid -this MODIS-derived relative wetness is then used to produce the downscaled SMAP SM. Results from the algorithm were evaluated in terms of their spatiotemporal coverage and accuracy using in situ measurements from SMAP Core Validation Sites (CVS), the US Department of Agriculture Soil Climate Analysis Network (USDA-SCAN), and the National Oceanic and Atmospheric Administration Climate Reference Network(NOAA-CRN). Results were also compared with the baselineSPL2SMPE and the SMAP/Sentinel-1 (SPL2SMAPS) 1kmproduct. Overall, the unbiased root mean square error (ubRMSE)of the disaggregated SM at the CVS using the TI approach is approximately 0.04 m3=m3, which is the SMAP mission requirement for the baseline products. The TI approach out performs the SMAP/Sentinel SL2SMAPS 1km product by approximately0.02 m3=m3. Over the agriculture/crop areas from SCAN and CRN sparse network stations, the TI approach exhibits better ubRMSE compared to SPL2SMPE andSPL2SMAPS byabout0.01 and 0.02 m3=m3, indicating its advantage in these areas. However, a drawback of this approach is that there are data gaps due to cloud cover as optical sensors cannot have a clear view of the land surface.

Soil moisture↗
NASA NTRS2020

SMAP Validation Experiment 2019-2020 (SMAPVEX19/20): Detection of Soil Moisture Under Forest Canopy

The retrieval of soil moisture under forest canopy has long been an important goal for low frequency remote sensing. The NASA mission started a dedicated field experiment in May 2019 by deploying two temporary soil moisture networks in northeast US that cover two separate SMAP pixels with variable degree of forest cover. The measurements will run through 2020 and they will be augmented with two intensive observation periods (IOP). The first IOP will be conducted in June-July 2020 and the other one in October 2020. The IOPs will see deployment of the airborne PALS (Passive Active L-band sensor) instrument, which is similar to the SMAP instrument, and intensive manual measurements of soil moisture and vegetation. The measurements also include tower-based radiometer observations with ground truth measurements within the instrument footprint. The early results have shown that the SMAP measurement signal at L-band is sensitive to soil moisture changes observed on the ground.

Andreas Colliander↗
NASA NTRS2020

SMAP Detects Soil Moisture under Temperate Forest Canopies

Soil moisture dynamics in the presence of dense vegetation canopies are determinants of ecosystem function and biogeochemical cycles, but the capability of existing spaceborne sensors to support reliable and useful estimates is not known. New results from a recently initiated field experiment in the northeast United States show that the NASA SMAP (Soil Moisture Active Passive) satellite is capable of retrieving soil moisture under temperate forest canopies. We present an analysis demonstrating that a parameterized emission model with the SMAP morning overpass brightness temperature resulted in a RMSD (root mean square difference) range of 0.047-0.057 m(exp 3)/m(exp 3) and a Pearson correlation range of 0.75-0.85 depending on the experiment location and the SMAP polarization. The inversion approach included a minimal amount of ancillary data. This result demonstrates unequivocally that spaceborne L-band radiometry is sensitive to soil moisture under temperate forest canopies, which has been uncertain because of lack of representative reference data.

Andreas Colliander↗
NASA NTRS2020

The Backscattering Contribution of Soybean Pods at L-band

L-band (1.25 GHz) radar measurements of a soybean canopy indicate that the emergence of seed pods is a significant contributor to the backscatter during the late stages of the growing season. In order to validate the measured data, a realistic scattering model of the soybean canopy is developed. The parameters of the soybean canopy and underlying soil used in the model vary over the growing season based on in situ measurements. Scattering amplitudes for soybean leaves are modeled analytically by using a thin disk approximation; stem and pods are jointly modeled using a numerical electromagnetic field solver. These scattering amplitudes are together incorporated into a coherent scattering model to obtain the backscattering coefficient for VV- and HH-polarizations. The modeling results show good agreement with the radar field measurements, having RMSEs of 0.51 dB for VV-pol and 1.1 dB for HH-pol. Both measured data and modeled results show that the change of soil moisture can be accurately monitored by L-band backscatter. It is also found that the difference between HH- and VV-polarized backscatter increases as the size of the soybean pods becomes larger. A method is developed here to estimate the number of pods in a soybean canopy based on polarimetric radar backscatter at L-band.

Radar backscatter↗
NASA NTRS2019

Comparison of high-resolution airborne soil moisture retrievals to SMAP soil moisture during the SMAP validation experiment 2016 (SMAPVEX16)

The NASA's Soil Moisture Active Passive (SMAP) mission conducted a field experiment with its partners over two 40-km agricultural domains in Iowa and Manitoba in the summer of 2016 to address concerns observed in SMAP soil moisture (SM) retrievals over agricultural areas. The experiment featured airborne Passive Active L-band System (PALS) flights over each domain with intensive ground measurements and dense networks of SM monitoring stations. With two intensive observation periods separated in time (May 28–June 20 and July 14–August 16), the flights captured both early-season/low vegetation and later-season/high-vegetation conditions. The comparison of the PALS brightness temperature (TB) measurements to the SMAP TB observed over the sites resulted in root mean square difference (RMSD) of 2.8 K and 4.0 K for vertical and horizontal polarizations, respectively. The subsequent SM analysis rescaled the PALS TB with the SMAP TB to allow equitable comparisons between the SM retrievals from the two instruments. The PALS SM retrieval algorithm used the SM sampled by the ground teams during the overpass days for tuning, and was parameterized by a high-resolution vegetation water content product calibrated using vegetation samples collected during the experiment. The tuning process was not able to find a satisfactory result with a temporally constant set of parameters in the single channel algorithm for the two intensive observation periods of the experiment. This result indicated that the rapid change in the vegetation structure during the growth stages and likely variation in the surface roughness conditions were not compatible with rigid parameterization over the entire period. However, using seasonally variable parameters we found that it was possible to retrieve soil moisture with satisfactory accuracy. Comparative analysis with the SMAP SM product included aggregation of the PALS SM to the SMAP pixel-scale. The RMSD between the PALS SM and the aggregated manual field samples was <0.04 m3/m3 with Pearson correlation >0.85 for both sites. The comparison between different in situ sources indicated that the soil moisture network measurements were not the source of the large biases observed for SMAP over the sites reported in earlier studies. Therefore, the results suggested the rapidly growing vegetation and the early-season surface condition changes not captured by the SMAP algorithm caused the SMAP retrieval errors. In addition, the significant deviations of the vegetation water content used by the SMAP product from the calibrated vegetation water content obtained during the experiment compounds the problem.

Andreas Colliander↗
NASA NTRS2017

Development and Assessment of the SMAP Enhanced Passive Soil Moisture Product

Launched in January 2015, the National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) observatory was designed to provide frequent global mapping of high-resolution soil moisture and freeze-thaw state every two to three days using a radar and a radiometer operating at L-band frequencies. Despite a hardware mishap that rendered the radar inoperable shortly after launch, the radiometer continues to operate nominally, returning more than two years of science data that have helped to improve existing hydrological applications and foster new ones.Beginning in late 2016 the SMAP project launched a suite of new data products with the objective of recovering some high-resolution observation capability loss resulting from the radar malfunction. Among these new data products are the SMAP Enhanced Passive Soil Moisture Product that was released in December 2016, followed by the SMAPSentinel-1 Active-Passive Soil Moisture Product in April 2017.This article covers the development and assessment of the SMAP Level 2 Enhanced Passive Soil Moisture Product (L2_SM_P_E). The product distinguishes itself from the current SMAP Level 2 Passive Soil Moisture Product (L2_SM_P) in that the soil moisture retrieval is posted on a 9 km grid instead of a 36 km grid. This is made possible by first applying the Backus-Gilbert optimal interpolation technique to the antenna temperature (TA) data in the original SMAP Level 1B Brightness Temperature Product to take advantage of the overlapped radiometer footprints on orbit. The resulting interpolated TA data then go through various correctioncalibration procedures to become the SMAP Level 1C Enhanced Brightness Temperature Product (L1C_TB_E). The L1C_TB_E product, posted on a 9 km grid, is then used as the primary input to the current operational SMAP baseline soil moisture retrieval algorithm to produce L2_SM_P_E as the final output. Images of the new product reveal enhanced visual features that are not apparent in the standard product. Based on in situ data from core validation sites and sparse networks representing different seasons and biomes all over the world, comparisons between L2_SM_P_E and in situ data were performed for the duration of April 1, 2015 October 30, 2016. It was found that the performance of the enhanced 9 km L2_SM_P_E is equivalent to that of the standard 36 km L2_SM_P, attaining a retrieval uncertainty below 0.040 m(exp 3)/m(exp 3) unbiased root-mean-square error (ubRMSE) and a correlation coefficient above 0.800. This assessment also affirmed that the Single Channel Algorithm using the V-polarized TB channel (SCA-V) delivered the best retrieval performance among the various algorithms implemented for L2_SM_P_E, a result similar to a previous assessment for L2_SM_P.

Enhanced↗
NASA NTRSDate not supplied

Active/Passive Remote Sensing of a Mature Soybean Canopy at L-band

This paper reports on development of a scattering model of a soybean canopies at L-band. The scattering model will be used for active and passive remote sensing of soybean plants with an emphasis on mature soybeans where the presence of pods is important to the observed microwave signal. The active problem is treated using the Distorted Born Approximation (DBA) and the passive problem is analyzed using Peake's method. These results are compared with field measurements made in 2012 by the truck-mounted ComRAD system, which is a combined radar and radiometer instrument operating at L-band. Investigation of backscatter from the soybean canopy shows good agreement between the radar measurement data and modeling results. The results also indicate that the L-band radar backscatter can be used to monitor both the soil moisture and the growth of the soybean pods. Past passive modeling efforts have not considered soybeans late in the growing season when pods are important. A new passive radiation model of soybean canopy will be developed based on the backscatter model.

Yiwen Zhou↗