Search NASA⌕ Search

Engineering topics

Peischl, Jeff

Publications and source records attributed to Peischl, Jeff.

Arctic tropospheric ozone: assessment of current knowledge and model performance

As the third most important greenhouse gas (GHG) after carbon dioxide (CO 2 ) and methane (CH 4 ), tropospheric ozone (O 3 ) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O 3 in the Arctic, a rapidly warming and sensitive environment. At different locations in the Arctic, the observed surface O 3 seasonal cycles are quite different. Coastal Arctic locations, for example, have a minimum in the springtime due to O 3 depletion events resulting from surface bromine chemistry. In contrast, other Arctic locations have a maximum in the spring. The 12 state-of-the-art models used in this study lack the surface halogen chemistry needed to simulate coastal Arctic surface O 3 depletion in the springtime; however, the multi-model median (MMM) has accurate seasonal cycles at non-coastal Arctic locations. There is a large amount of variability among models, which has been previously reported, and we show that there continues to be no convergence among models or improved accuracy in simulating tropospheric O 3 and its precursor species. The MMM underestimates Arctic surface O 3 by 5% to 15% depending on the location. The vertical distribution of tropospheric O 3 is studied from recent ozonesonde measurements and the models. The models are highly variable, simulating free-tropospheric O 3 within a range of ±50% depending on the model and the altitude. The MMM performs best, within ±8% for most locations and seasons. However, nearly all models overestimate O 3 near the tropopause (~300 hPa or ~8 km), likely due to ongoing issues with underestimating the altitude of the tropopause and excessive downward transport of stratospheric O 3 at high latitudes. For example, the MMM is biased high by about 20% at Eureka. Observed and simulated O 3 precursors (CO, NO x , and reservoir PAN) are evaluated throughout the troposphere. Models underestimate wintertime CO everywhere, likely due to a combination of underestimating CO emissions and possibly overestimating OH. Throughout the vertical profile (compared to aircraft measurements), the MMM underestimates both CO and NO x but overestimates PAN. Perhaps as a result of competing deficiencies, the MMM O 3 matches the observed O 3 reasonably well. Our findings suggest that despite model updates over the last decade, model results are as highly variable as ever and have not increased in accuracy for representing Arctic tropospheric O 3 .

54 ENVIRONMENTAL SCIENCES↗

Using Multiscale Ethane/Methane Observations to Attribute Coal Mine Vent Emissions in the San Juan Basin From 2013 to 2021

Abstract Source attribution of natural gas emissions from fossil fuels in New Mexico's San Juan Basin (SJB) is challenging due to source heterogeneity and emissions transience. We demonstrate that ethane (C 2 H 6 ) to methane (CH 4 ) mixing ratios can identify and separate sources over different scales using various measurement techniques. We report simultaneous CH 4 and C 2 H 6 observations near a coal mine vent and oil and gas (O&G) emission sources using ground‐based in situ measurements in 2020/2021. During these campaigns, we observed a stable coal vent C 2 H 6 :CH 4 ratio of 1.28% ± 0.11%, discernibly different than nearby O&G source ratios ranging from 0.9% to 16.8%. We analyze airborne observations of the SJB taken in 2014/2015 that exhibit similar coal vent ratios and further show the region's heterogeneity. We identify episodic O&G sources, including a gas plant source detected in 2014/2015 that is absent in our 2020/2021 data. We examine total column observations of C 2 H 6 and CH 4 made in 2013 with a solar spectrometer and find a C 2 H 6 :CH 4 ratio of 1.3% ± 0.4% for the coal vent. The stable and unique coal vent ratio relative to other O&G sources in the region is used to demonstrate that consistent attribution is possible using various measurement methods at multiple scales across many years. Finally, we demonstrate that using C 2 H 6 as a proxy for fossil CH 4 inversions can inform detailed basin‐scale inversions, provided we understand source specific changes in the C 2 H 6 :CH 4 ratio like we report in the SJB.

54 ENVIRONMENTAL SCIENCES↗

Monitoring Methane Emissions from Oil and Gas Operations

The atmospheric concentration of methane has more than doubled since the start of the Industrial Revolution. Methane is the second-most-abundant greenhouse gas created by human activities and a major driver of climate change. This APS-Optica report provides a technical assessment of the current state of monitoring U.S. methane emissions from oil and gas operations, which accounts for roughly 30% of U.S. anthropogenic methane emissions. The report identifies current technological and policy gaps and makes recommendations for the federal government in three key areas: methane emissions detection, reliable and systematized data and models to support mitigation measures, and effective regulation.

02 PETROLEUM↗

Representativeness of CO and O3 Along ATom Transects Derived from GEOS-5 and GMI-CTM Simulations

One major goal for the NASA Atmospheric Tomography Mission (ATom) is producing an observation-based chemical climatology to represent the atmospheric heterogeneity. In this study, we use CO and O3 observations and global atmospheric model simulations to examine the spatial representativeness of the ATom-1 and -2 transects within a 4D framework provided by the NASA GEOS-5 and GMI-CTM models. Based on the probability density functions, we find that the variability of CO and O3 along the flight tracks is well hindcast by the model when sampled per ATom flights. The CO variations along the ATom-transect are likely representative of the typical CO variations over the whole Pacific basin during both the ATom-1 and -2 periods, the northern Atlantic during the ATom-1 period, and the tropical Atlantic in the ATom-2 period. Over southern Atlantic, CO along the ATom-1 transects is likely less well mixed than that of the broader region, but is still representative of the median CO concentration. CO along the ATom-2 transect is likely higher than the median CO concentration over this region. For O3, the agreements between PDFs of O3 sampled along the ATom transects and over the broader regions are fair to good over all six regions (Scores > 0.65) with notable discrepancies over some regions. For example, in ATom-1 over the northern Pacific and Atlantic, the transect samples air masses with higher O3 levels. During ATom-2, the transect over-represents the occurrence of O3 plumes over tropical Pacific. Over the southern Pacific and Atlantic for both ATom-1 and -2, the transects have a less uniform distribution compared to the surrounding basins, but still represent the median O3 abundance. Overall, we conclude in most cases that ATom measurements represent the statistical variations of these two species over the ocean basins at the time of measurement. Higher-order statistics, including covariance of species, has not been tested in this study.

ozone↗

Decadal Changes in Summertime Reactive Oxidized Nitrogen and Surface Ozone over the Southeast United States

Widespread efforts to abate ozone (O3) smog have significantly reduced emissions of nitrogen oxides (NOx) over the past 2 decades in the Southeast US, a place heavily influenced by both anthropogenic and biogenic emissions. How reactive nitrogen speciation responds to the reduction in NOx emissions in this region remains to be elucidated. Here we exploit aircraft measurements from ICARTT (International Consortium for Atmospheric Research on Transport and Transformation - July-August 2004), SENEX (Southeast Nexus - June-July 2013), and SEAC4RS (Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys - August-September 2013) and long-term ground measurement networks alongside a global chemistry-climate model to examine decadal changes in summertime reactive oxidized nitrogen (RON) and ozone over the Southeast US. We show that our model can reproduce the mean vertical profiles of major RON species and the total (NO (sub y)) in both 2004 and 2013. Among the major RON species, nitric acid (HNO3) is dominant (approximately 42-45 percent), followed by NOx (31 percent), total peroxy nitrates (Sigma PNs; 14 percent), and total alkyl nitrates (Sigma ANs; 9-12 percent) on a regional scale. We find that most RON species, including NOx, Sigma PNs, and HNO3, decline proportionally with decreasing NOx emissions in this region, leading to a similar decline in NO (sub y). This linear response might be in part due to the nearly constant summertime supply of biogenic VOC (Volatile Organic Compounds) emissions in this region. Our model captures the observed relative change in RON and surface ozone from 2004 to 2013. Model sensitivity tests indicate that further reductions of NOx emissions will lead to a continued decline in surface ozone and less frequent high-ozone events.

Li, Jingyi↗

Observations of VOC Emissions and Photochemical Products over US Oil- and Gas-Producing Regions Using High-Resolution H3O+ CIMS (PTR-ToF-MS)

VOCs (Volatile Organic Compounds) related to oil and gas extraction operations in the United States were measured by H3O (sup plus) chemical ionization time-of-flight mass spectrometry (H3O (sup plus) ToFCIMS/PTR-ToF-MS (Time of Flight Chemical Ionization Mass Spectrometry/Proton Transfer Reaction-Time of Flight-Mass Spectroscopy) from aircraft during the Shale Oil and Natural Gas Nexus (SONGNEX) campaign in March-April 2015. This work presents an overview of major VOC species measured in nine oil- and gas-producing regions, and a more detailed analysis of H3O (sup plus) ToF-CIMS measurements in the Permian Basin within Texas and New Mexico. Mass spectra are dominated by small photochemically produced oxygenates and compounds typically found in crude oil: aromatics, cyclic alkanes, and alkanes. Mixing ratios of aromatics were frequently as high as those measured downwind of large urban areas. In the Permian, the H3O (sup plus) ToF-CIMS measured a number of underexplored or previously unreported species, including aromatic and cycloalkane oxidation products, nitrogen heterocycles including pyrrole (C4H5N) and pyrroline (C4H7N), H2S, and a diamondoid (adamantane) or unusual monoterpene. We additionally assess the specificity of a number of ion masses resulting from H3O (sup plus) ion chemistry previously reported in the literature, including several new or alternate interpretations.

mass spectrometr↗

Airborne Measurements of Western U.S. Wildfire Emissions: Comparison with Prescribed Burning and Air Quality Implications

Wildfires emit significant amounts of pollutants that degrade air quality. Plumes from three wildfires in the western U.S. were measured from aircraft during the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) and the Biomass Burning Observation Project (BBOP), both in summer 2013. This study reports an extensive set of emission factors (EFs) for over 80 gases and 5 components of submicron particulate matter (PM1) from these temperate wildfires. These include rarely, or never before, measured oxygenated volatile organic compounds and multifunctional organic nitrates. The observed EFs are compared with previous measurements of temperate wildfires, boreal forest fires, and temperate prescribed fires. The wildfires emitted high amounts of PM1 (with organic aerosol (OA) dominating the mass) with an average EF that is more than 2 times the EFs for prescribed fires. The measured EFs were used to estimate the annual wildfire emissions of carbon monoxide, nitrogen oxides, total non methane organic compounds, and PM1 from 11 western U.S. states. The estimated gas emissions are generally comparable with the 2011 National Emissions Inventory (NEI). However, our PM1 emission estimate (1530 +/- 570 Gg/yr) is over 3 times that of the NEI PM2.5 estimate and is also higher than the PM2.5 emitted from all other sources in these states in the NEI. This study indicates that the source of OA from biomass burning in the western states is significantly underestimated. In addition, our results indicate that prescribed burning may be an effective method to reduce fine particle emissions.

measured oxygenated volatile organic compounds↗

Impact of Evolving Isoprene Mechanisms on Simulated Formaldehyde: An Inter-comparison Supported by in Situ Observations from SENEX

Isoprene oxidation schemes vary greatly among gas-phase chemical mechanisms, with potentially significant ramifications for air quality modeling and interpretation of satellite observations in biogenic-rich regions. In this study, in situ observations from the 2013 SENEX mission are combined with a constrained O-D photochemical box model to evaluate isoprene chemistry among five commonly used gas-phase chemical mechanisms: CBO5, CB6r2, MCMv3.2, MCMv3.3.1, and a recent version of GEOS-Chem. Mechanisms are evaluated and inter-compared with respect to formaldehyde (HCHO), a high-yield product of isoprene oxidation. Though underestimated by all considered mechanisms, observed HCHO mixing ratios are best reproduced by MCMv3.3.1 (normalized mean bias = -15%), followed by GEOS-Chem (-17%), MCMv3.2 (-25%), CB6r2 (-32%) and CB05 (-33%). Inter-comparison of HCHO production rates reveals that major restructuring of the isoprene oxidation scheme in the Carbon Bond mechanism increases HCHO production by only approx. 5% in CB6r2 relative to CBO5, while further refinement of the complex isoprene scheme in the Master Chemical Mechanism increases HCHO production by approx. 16% in MCMv3.3.1 relative to MCMv3.2. The GEOS-Chem mechanism provides a good approximation of the explicit isoprene chemistry in MCMv3.3.1 and generally reproduces the magnitude and source distribution of HCHO production rates. We analytically derive improvements to the isoprene scheme in CB6r2 and incorporate these changes into a new mechanism called CB6r2-UMD, which is designed to preserve computational efficiency. The CB6r2-UMD mechanism mimics production of HCHO in MCMv3.3.1 and demonstrates good agreement with observed mixing ratios from SENEX (-14%). Improved simulation of HCHO also impacts modeled ozone: at approx. 0.3 ppb NO, the ozone production rate increases approx. 3% between CB6r2 and CB6r2-UMD, and rises another approx. 4% when HCHO is constrained to match observations.

isoprene↗

Why Do Models Overestimate Surface Ozone in the Southeast United States?

Ozone pollution in the Southeast US involves complex chemistry driven by emissions of anthropogenic nitrogen oxide radicals (NO(x) triple bond NO + NO2) and biogenic isoprene. Model estimates of surface ozone concentrations tend to be biased high in the region and this is of concern for designing effective emission control strategies to meet air quality standards. We use detailed chemical observations from the SEAC(exp 4)RS aircraft campaign in August and September 2013, interpreted with the GEOS-Chem chemical transport model at 0.25 deg x 0.3125 deg horizontal resolution, to better understand the factors controlling surface ozone in the Southeast US. We find that the National Emission Inventory (NEI) for NO(x) from the US Environmental Protection Agency (EPA) is too high. This finding is based on SEAC(exp 4)RS observations of NO(x) and its oxidation products, surface network observations of nitrate wet deposition fluxes, and OMI satellite observations of tropospheric NO2 columns. Our results indicate that NEI NO(x) emissions from mobile and industrial sources must be reduced by 30-60%, dependent on the assumption of the contribution by soil NO(x) emissions. Upper-tropospheric NO2 from lightning makes a large contribution to satellite observations of tropospheric NO2 that must be accounted for when using these data to estimate surface NO(x) emissions. We find that only half of isoprene oxidation proceeds by the high-NO(x) pathway to produce ozone; this fraction is only moderately sensitive to changes in NO(x) emissions because isoprene and NO(x) emissions are spatially segregated. GEOS-Chem with reduced NO(x) emissions provides an unbiased simulation of ozone observations from the aircraft and reproduces the observed ozone production efficiency in the boundary layer as derived from a regression of ozone and NO(x) oxidation products. However, the model is still biased high by 6 plus or minus 14 ppb relative to observed surface ozone in the Southeast US. Ozonesondes launched during midday hours show a 7 ppb ozone decrease from 1.5 km to the surface that GEOS-Chem does not capture. This bias may reflect a combination of excessive vertical mixing and net ozone production in the model boundary layer.

Oxidation↗