Search NASA⌕ Search

Engineering topics

Peng, H.

Publications and source records attributed to Peng, H..

29 records · Page 2

Novel Solar Energy Conversion Materials by Design of Mn(II) Oxides

Solar energy conversion materials need to fulfill simultaneously a number of requirements in regard of their band-structure, optical properties, carrier transport, and doping. Despite their desirable chemical properties, e.g., for photo-electrocatalysis, transition-metal oxides usually do not have desirable semiconducting properties. Instead, oxides with open cation d-shells are typically Mott or charge-transfer insulators with notoriously poor transport properties, resulting from large effective electron/hole masses or from carrier self-trapping. Based on the notion that the electronic structure features (p-d interaction) supporting the p-type conductivity in d10 oxides like Cu2O and CuAlO2 occurs in a similar fashion also in the d5 (high-spin) oxides, we recently studied theoretically the band-structure and transport properties of the prototypical binary d5 oxides MnO and Fe2O3 [PRB 85, 201202(R)]. We found that MnO tends to self-trap holes by forming Mn+III, whereas Fe2O3 self-traps electrons by forming Fe+II. However, the self-trapping of holes is suppressed by when Mn is tetrahedrally coordinated, which suggests specific routes to design novel solar conversion materials by considering ternary Mn(II) oxides or oxide alloys. We are presenting theory, synthesis, and initial characterization for these novel energy materials.

14 SOLAR ENERGY↗

Enhancement of thermoelectric figure of merit by doping Dy in La{sub 0.1}Sr{sub 0.9}TiO{sub 3} ceramic

Ceramic samples of La{sub 0.1}Sr{sub 0.9-x}Dy{sub x}TiO{sub 3} (x = 0.01, 0.03, 0.07, 0.10) have been prepared by the solid-state reaction method. Characterization from the powder X-ray diffraction indicates that their crystal structure changes from cubic to tetragonal phase. Their electrical and thermal transport properties are measured in the temperature range of 300-1100 K. n-Type thermoelectric is obtained with large Seebeck coefficient. The figure of merit is markedly improved, due to relatively lower electrical resistivity and thermal conductivity by Dy doping effect. A much lower electrical resistivity of 0.8 m{Omega} cm at room temperature is obtained in La{sub 0.1}Sr{sub 0.8}Dy{sub 0.1}TiO{sub 3}, and with a relatively lower thermal conductivity of 2.5 W/m K at 1075 K. The maximum figure of merit reaches {approx}0.36 at 1045 K for La{sub 0.1}Sr{sub 0.83}Dy{sub 0.07}TiO{sub 3}, which is the largest value among n-type oxide thermoelectric ceramics.

36 MATERIALS SCIENCE↗

Friction Properties of Surface-Fluorinated Carbon Nanotubes

Surface modification of the tubular or sphere-shaped carbon nanoparticles through chemical treatment, e.g., fluorination, is expected to significantly affect their friction properties. In this study, a direct fluorination of the graphene-built tubular (single-walled carbon nanotubes) structures has been carried out to obtain a series of fluorinated nanotubes (fluoronanotubes) with variable C(n)F (n =2-20) stoichiometries. The friction coefficients for fluoronanotubes, as well as pristine and chemically cut nanotubes, were found to reach values as low as 0.002-0.07, according to evaluation tests run in contact with sapphire in air of about 40% relative humidity on a ball-on-disk tribometer which provided an unidirectional sliding friction motion. These preliminary results demonstrate ultra-low friction properties and show a promise in applications of surface modified nanocarbons as a solid lubricant.

Wal, R. L. Vander↗

An extraterrestrial event at the tertiary-quaternary boundary

During the North Pacific Manganese Nodules Investigation in 1983, we collected a large-diameter core M14 (8 deg. 00.15 N, 176 deg, 10.65 W; 3991-m depth of water). This gravity core is 420 cm long in total. It is composed of calcureous ooze at 0-320 cm and siliceous ooze at 320-420 cm of depth. A great number of microtektites were found at 270-300 cm (average content is 15 microtektites per 100-g sediment). Because abundant microtektites are restricted to a 30-m-thick zone of deep-sea core, we called this zone the microtektite layer. The age of the sedimentary stratum containg microtektites is 2.14-2.30 m.y., corresponding to the Pliocene to Pleistocene Periods as indicated by paleomagnetic and paleontologic analysis. We can give the following two primary conclusions: (1) the core M14 microtektites are products of a major meteorite or asteroid impact 2.14-2.30 m.y. ago; and (2) the age of 2.14-2.30 m.y. is an important geological age; perhaps it is just a correct age for dividing the Tertiary/Quarternary boundary. This result is quite close to previous data.

Peng, H.↗