Engineering topics

Peng, Qiang

Publications and source records attributed to Peng, Qiang.

25 records · Page 2

DOE OSTI2022

Improving the performance of PM6 donor polymer by random ternary copolymerization of BDD and DTBT segments

Developing high-performance wide bandgap polymer donors to match the rapidly growing non-fullerene small molecule acceptors (NF-SMAs) is of great importance to further improve the photovoltaic performances of organic solar cells (OSCs). PM6 and D18 are two leading wide bandgap donor polymers, but their performances are highly sensitive to the molecular weights, which have distinct impact on the morphology and thereby the charge generation and recombination processes. Here, in this work, we reported the random ternary copolymerization of PM6 and D18 segments to develop random terpolymers with finely tuned photoelectronic properties and optimized blend morphology for high-performance OSCs. The resulting random terpolymers (PMD-5, PMD-10, PMD-15 and PMD-20) exhibited finely tuned absorptions, energy levels and blend morphology. The optimal morphology of PMD-15:L8-BO contributed to the fast exciton diffusion and dissociation, efficient charge extraction with suppressed recombination. Thus, the power conversion efficiency was improved from 17.22% of the control PM6 devices and 17.47% of the control D18 devices to 18.12% of PMD-15 based devices, which is the top performance of random terpolymers. Moreover, the PMD-15 exhibited much higher batch-to-batch reproducibility at a broad molecular weight range than that of PM6 and D18, showing promising for practical applications.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Binary Blend All‐Polymer Solar Cells with a Record Efficiency of 17.41% Enabled by Programmed Fluorination Both on Donor and Acceptor Blocks

Abstract Despite remarkable breakthrough made by virtue of “polymerized small‐molecule acceptor (PSMA)” strategy recently, the limited selection pool of high‐performance polymer acceptors and long‐standing challenge in morphology control impede their further developments. Herein, three PSMAs of PYDT‐2F, PYDT‐3F, and PYDT‐4F are developed by introducing different fluorine atoms on the end groups and/or bithiophene spacers to fine‐tune their optoelectronic properties for high‐performance PSMAs. The PSMAs exhibit narrow bandgap and energy levels that match well with PM6 donor. The fluorination promotes the crystallization of the polymer chain for enhanced electron mobility, which is further improved by following n ‐doping with benzyl viologen additive. Moreover, the miscibility is also improved by introducing more fluorine atoms, which promotes the intermixing with PM6 donor. Among them, PYDT‐3F exhibits well‐balanced high crystallinity and miscibility with PM6 donor; thus, the layer‐by‐layer processed PM6/PYDT‐3F film obtains an optimal nanofibril morphology with submicron length and ≈23 nm width of fibrils, facilitating the charge separation and transport. The resulting PM6/PYDT‐3F devices realizes a record high power conversion efficiency (PCE) of 17.41% and fill factor of 77.01%, higher than the PM6/PYDT‐2F (PCE = 16.25%) and PM6/PYDT‐4F (PCE = 16.77%) devices.

Zhou, Dehong↗

DOE OSTI2022

Lowly Fused Non-Fullerene Acceptors Towards Efficient Organic Solar Cells Enabled by Isomerization

Here two lowly fused non-fullerene acceptors (NFAs) with isomeric structures, named as BTP-out-4F and BTP-in-4F, were developed by tailoring the fused 7-ring central core of Y6 into a lowly fused 5-ring linked with two octyloxythiophene bridges. BTP-out-4F with octyloxy side chains away from the central core exhibited large steric hindrance that restrained the rotational freedom between the thiophene bridge and end group but maintained free rotation between the central core and the thiophene bridge. In contrast, BTP-in-4F with octyloxy side chains close to the central core had much lower rotation freedom due to the non-covalent S … O interactions locked the central core, thiophene bridge and end group simultaneously, making BTP-in-4F have higher molecular crystallinity. On the other hand, the optical properties, energy levels and the blend morphology properties were significantly influenced, leading to distinctive photovoltaic performances. BTP-out-4F formed favorable energy level alignment and morphology when matching with PBDB-T donor, thus its device realized a much higher PCE of 13.32%, which was over 13 times than that of BTP-in-4F based device (PCE=0.97%).

36 MATERIALS SCIENCE↗

DOE OSTI2022

Verifying the structure-property-performance relationship of Y6-based small molecule acceptors by alkoxy-side chain isomerization and conjugated skeleton asymmetry

Non-fullerene small molecule acceptors (NF-SMAs) such as Y6 derivatives were the current working horse for the top performing polymer solar cells (PSCs). For this reason, numerous chemical modifications have been explored for establishing structure–property-performance relationship for Y6-based NF-SMAs. In this work, we explored the isomerization on asymmetrical Y6 derivatives by varying the position of alkoxy side chain on the thiophene linkage between the core and one of the end groups of Y6. The isomers with differences in conformational restriction raised by noncovalent interactions as well as steric hindrance revealed distinctive behavior in crystallization and polymorphism, which led to a significant contrast in PSC performances. Here the X-TO1 molecule with alkoxy side chain facing the end group (outward) displayed preferred molecular configuration and polymorph, delivering power conversion efficiency (PCE) of 15.63%, while its isomer X-TO2 showed coexisted polymorphs significantly increased the charge recombination in the PSC devices led to a low PCE around 3%. This structure–property-performance relationship not only highlighted the elegancy of isomerization in tuning the photovoltaic performances but also identified polymorphism as one of the causes for impairing photovoltaic performances of PSCs.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Unique W-Shape Y6 isomer as effective solid additive for High-Performance PM6:Y6 polymer solar cells

The current top-performing polymer solar cell (PSC) systems are mostly based on PM6:Y6 host blend. To date, numerous materials have been explored as the third component for these systems to form ternary blends or as additives. Vitrification agents are a group of additives proved to be useful in affecting the morphology of organic semiconductors. Here to design a suitable vitrification agent for non-fullerene electron acceptor Y6, an isomer strategy was explored where the thienothiophene wings of the Y6 molecule were inversed to form a W-shaped Y6 isomer of i-Y6. It was found that i-Y6 crystallized poorly with a different packing style than Y6 and could blend well in amorphous phase of Y6. These properties enabled i-Y6 to finely tune the morphology of PM6:Y6 blend at low additive dosages. The power conversion efficiency (PCE) of PM6:Y6 based PSC was raised from 16.827% to 17.433% at a dosage of Y6:i-Y6 ratio of 24:1. This work demonstrated isomerization as a viable strategy for developing solid additives for high performance PSC blends and vitrification agents as effective additives for tuning morphology and improving performances of PSCs.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Cost-Efficiency balanced polymer acceptors based on lowly fused Dithienopyrrolo[3, 2b]benzothiadiazole for 16.04% efficiency All-Polymer solar cells

All-polymer solar cells (All-PSCs) attracted increasing attention due to the outstanding thermal stability and mechanical properties. The current prevailing polymer acceptors for most efficient All-PSCs are polymerized high-performance small molecule acceptor of Y6, i.e. the dithienothiopheno[3,2-b]-pyrrolobenzothiadiazole (BTTP) based polymers. However, the BTTP-based polymers often show relatively shallow highest occupied molecular orbital (HOMO) energy level and high figure of merit (FOM), which limit the rational selection of paring donor polymers. Herein, we presented two low-cost polymer acceptors, namely as BTP-T2F and BTP-2T2F, based on lowly fused dithienopyrrolo[3,2b]benzothiadiazole (BTP, removing two thiophene cycles from BTTP). Here the BTP-based polymers exhibited deeper HOMO levels around –5.90 eV, which could match variable donor polymers with low-lying HOMO levels, such as low-cost PTQ10. Additionally, the synthesis was significantly simplified compared to BTTP-based polymers. A power conversion efficiency (PCE) of 14.32% was achieved in binary blend device containing PTQ10:BTP-2T2F. By adding a miscibility-enhancing PBDTCl-TPD as a third component, the top PCE of 16.04% was obtained in ternary blend All-PSCs. Combining the high device performance and low estimated cost, extraordinary cost-efficiency balance was realized within these BTP-based polymer acceptors.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

The most popular approach to fabricating organic solar cells (OSCs) is solution processing a mixture of donor (D) and acceptor (A) materials into an active layer with a bulk heterojunction (BHJ) nanostructure. In this work, it is demonstrated that the interdigitated heterojunction (IHJ) is a more suitable nanostructure of the active layer for high-performance OSCs whereas it is a long standing challenge to realize well-defined IHJ structures. Here, a facile and versatile sequential solution processing method is developed to produce an IHJ nanostructure with power conversion efficiency reaching 18.74% (18.10% for BHJ the counterpart) by fabricating a donor film with nanopores created by a wax additive, sequentially casting the acceptor on top of infiltrating the nanopores. Compared to the BHJ, the IHJ structure with an interpillar distance within the exciton diffusion length can afford a large bulk D/A interface for efficient exciton dissociation with a minimized charge recombination while free electrons and holes can transport to the respective electrodes through more straightforward pathways, thus enhance performance. Furthermore, the D or A phase in the IHJ device contacts with only one electrode, which can prevent shunting between the anode and cathode and facilitate the industrial mass production of OSCs.

36 MATERIALS SCIENCE↗