Hydrogen Isotope Labeling of Pharmaceuticals Via Dual Hydrogen Isotope Exchange Pathways Using CdS Quantum Dot Photocatalyst
Explore the source record for details and available documents.
Maity, Rajendra↗
Engineering topics
Perras, Frédéric A.
Publications and source records attributed to Perras, Frédéric A..
Selective 17 O-labeling of silica
The addition of 17 OH 2 to silica at room temperature leads to spontaneous hydroxyl oxygen exchange and the selective isotopic enrichment of silanols, as observed using in and ex situ 17 O NMR. Furthermore, the discovery that silanols are labile alters our understanding of the chemistry of silica surfaces.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Size matters: altering the metal-surface coordination in micropores via structural confinement effects
Solid-state NMR experiments were used to investigate the dynamics of supported complexes grafted to a series of silica gel materials of varied pore sizes. Through dipolar recoupling measurements, we found that ligand dynamics were impeded in the more confined environments, as would be expected. A new form of motion involving the complex as a whole, however, appeared in the most restricted environment consisting of 22 Å diameter pores. These motions persisted down to –100 °C at which point the ligands were frozen on the NMR timescale. The newly observed dynamics could only result from the breaking of secondary dative metal–siloxane interactions that otherwise lock the complex in a preferred orientation on the surface. Crucially, these results show that confinement effects alone can be sufficient to reduce a grafted metal's effective coordination number in direct analogy to the synthesis of undercoordinated complexes using bulky ligands. Finally, this finding could have important implications in the synthesis of more active heterogeneous catalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Observing the Surface Termination of LaScO 3 Perovskite Using Solid-State Nuclear Magnetic Resonance
Materials with well-defined surfaces are drawing increased attention for the design of bespoke catalysts and nanomaterials. Gaining a detailed understanding of the surfaces of these materials is an important challenge, which is often complicated by surface polymorphism and dynamic restructuring. We introduce the use of surface-enhanced NMR spectroscopy for the observation of such surfaces, focusing on LaScO 3 as an example. Here, we show that double-resonance NMR experiments correlating surface oxygen and probe molecules to the 139 La and 45 Sc nuclei at the surface reveal the material to be terminated by a ScO x monolayer. Surface-selective 17 O and 45 Sc NMR experiments further showed the material to be hydroxyl terminated and that the surface may be prone to dynamic restructuring as a result of moisture exposure. Perhaps most interestingly, surface-selective 139 La NMR experiments revealed the existence of previously undetected surface lanthanum defects, suggesting that surface-enhanced NMR may be useful as a guide in the synthesis of defect-free surfaces in the design of various nanomaterials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Comparison of methods for the NMR measurement of motionally averaged dipolar couplings
Motionally averaged dipolar couplings are an important tool for understanding the complex dynamics of catalysts, polymers, and biomolecules. While there is a plethora of solid-state NMR pulse sequences available for their measurement, in can be difficult to gauge the methods’ strengths and weaknesses. In particular, there has not been a comprehensive comparison of their performance in natural abundance samples, where 1H homonuclear dipolar couplings are important and the use of large MAS rotors may be required for sensitivity reasons. In this work, we directly compared some of the more common methods for measuring C–H dipolar couplings in natural abundance samples using L-alanine (L-Ala) and the N-formyl-L-methionyl-L-leucyl-L-phenylalanine (fMLF) tripeptide as model systems. Here, we evaluated their performance in terms of accuracy, resolution, sensitivity, and ease of implementation. We found that, despite the presence of 1H homonuclear dipolar interactions, all methods, with the exception of REDOR, were able to yield the reasonable dipolar coupling strengths for both mobile and static moieties. Of these methods, PDLF provides the most convenient workflow and precision at the expense of low sensitivity. In low-sensitivity cases, MAS-PISEMA and DIPSHIFT appear to be the better options.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Enhanced Activity from Coordinatively Unsaturated and Dynamic Zeolite-Bound Organoscandium Species
Scandium borohydride grafted into the micropores of the faujasite zeolite HY30 catalyzes the C–H borylation of benzene, whereas silica-grafted species are inactive. This catalytic activity may originate from grafting at a Brønsted acid site leading to a more electron-deficient rare earth center. Herein, we apply multinuclear double-resonance nuclear magnetic resonance (NMR) experiments to probe the structure and dynamics of zeolite- and silica-bound scandium borohydride complexes. The experiments reveal that scandium centers located within the zeolite micropores, in proximity to Al-created Brønsted sites, are more dynamic than rigid scandium sites grafted on silanols. Through a combination of NMR and molecular dynamics simulations, we show that the coordination of the scandium in the zeolite is labile, with the metal exchanging between two binding sites. As a result, the weak electron donation from the support that enables the movement of the Sc center leads to the formation of an undercoordinated metal center that cannot exist on silica, ultimately leading to the new catalytic activity of the species.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Elimination of homogeneous broadening in 1 H solid-state NMR
1 H solid-state NMR spectra are plagued by low resolution, necessitating the use of complex pulse sequences or specialized equipment. Here, we introduce a new resolution enhancement method, inspired by super-resolution microscopy, that uses a 2D Hahn-echo experiment to constrain deconvolution. The result is an effective doubling of the MAS frequency.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Silicon Nitride Surface Enabled Propane Dehydrogenation Catalyzed by Supported Organozirconium
Mesoporous silicon nitride (Si 3 N 4 ) is a nontraditional support for the chemisorption of organometallic complexes with the potential for enhancing catalytic activity through features such as the increased Lewis basicity of nitrogen for heterolytic bond activation, increased ligand donor strength, and metal–ligand orbital overlap. In this report tetrabenzyl zirconium (ZrBn 4 ) was chemisorbed on Si 3 N 4 , and the resulting supported organometallic species was characterized by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Dynamic Nuclear Polarization-enhanced Solid State Nuclear Magnetic Resonance (DNP-SSNMR), and X-ray Absorption Spectroscopy (XAS). Based on the hypothesis that the nitride might enable facile heterolytic C–H bond activation along the Zr–N bond, this material was found to be a highly active (1.53 mol propene mol Zr –1 h –1 at 450 °C) and selective (99% to propylene) catalyst for propane dehydrogenation. In contrast, the homologous silica supported complex exhibited negligible activity under these conditions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanical Milling – Induced Microstructure Changes in Argyrodite LPSCl Solid-State Electrolyte Critically Affect Electrochemical Stability
Microstructure of argyrodite solid-state electrolyte (SSE) critically affects lithium metal electrodeposition/dissolution. While the stability of unmodified SSE is mediocre, once optimized state-of-the-art electrochemical performance is achieved (symmetric cells, full cells with NMC811) without secondary interlayers or functionalized current collectors. Planetary mechanical milling in wet media (m-xylene) is employed to alter commercial Li 6 PS 5 Cl (LPSCl) powder. Quantitative stereology demonstrates how milling progressively refines grain and pore size/distribution in the SSE compact, increases its density, and geometrically smoothens the SSE-Li interface. Mechanical indentation demonstrates that these changes lead to reduced site-to-site variation in the compact's hardness. Milled microstructures promote uniform early-stage electrodeposition on foil collectors and stabilize solid electrolyte interphase (SEI) reactivity. Analysis of half-cells with bilayer electrolytes demonstrates the importance of microstructure directly contacting current collector, with interface roughness due to pore and grain size distribution being key. For the first time, short-circuiting Li metal dendrite is directly identified, employing 1.5 mm diameter “mini” symmetrical cell and cryogenic focused ion beam (cryo-FIB) electron microscopy. The branching sheet-like dendrite traverses intergranularly, filling the interparticle voids and forming an SEI around it. Importantly, mesoscale modeling reveals the relationship between Li-SSE interface morphology and the onset of electrochemical instability, based on underlying reaction current distribution.
25 ENERGY STORAGE↗
Automatic fitting of multiple-field solid-state NMR spectra
The NMR lineshapes produced by half-integer quadrupolar nuclei are sensitive to 11 distinct fit parameters per inequivalent site. To date, automatic fitting routines have failed to replace manual parameter insertion and evaluation due to the importance of local minima and the need for fitting multiple-field magic-angle spinning (MAS) and static spectra simultaneously. Herein we introduce a new tool, AMES-Fit (Automatic Multiple Experiment Simulation and Fitting), to automatically find the global best-fit simulation parameters for a series of multiple-field NMR lineshapes. AMES-Fit uses an adaptive step size random search algorithm to dynamically probe parameter space and requires minimal human input. Importantly, the best fits are obtained in a few minutes of computation time that would otherwise have required several person-hours of work. The program is freely available and open-source.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Probing Interactions between Adsorbed Polymers and γ-Al 2 O 3 Using Solid-State NMR
The interactions between polymers and metal oxide surfaces affect the physical properties of polymer composites and the selectivity of catalysts used for plastic conversion. Gauging the strengths of these interactions and how they depend on adsorption conformations and polymer structure is nevertheless quite challenging. Herein, we evaluate whether a recently introduced dynamic nuclear polarization-based surface-to-atom distance measurement method can be used to gauge the specific interactions between five vinyl polymers and an oxide support (alumina). The adsorption conformations of polymer monolayers were studied using site-specific 13 C{ 27 Al} rotational-echo saturation-pulse double-resonance (RESPDOR) experiments. The method is effective in revealing the average distance between the adsorbed polymer and the surface, as well as the fraction of the monomers that are adsorbed. Polymers that possess larger side chains are more weakly adsorbed, as evidenced by their formation of more numerous loop and tail structures. In conclusion, the measured RESPDOR dephasing data further reveals that polymer adsorption conformations are largely disordered and involve few hydrogen bonding interactions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Pore-encapsulated catalysts for selective hydrogenolysis of plastic waste
Disclosed herein is a catalyst which comprises a silica core having an outer surface and a mesoporous silica shell having an outer surface and an inner surface with the inner surface being inside the outer surface of said mesoporous silica shell proximate to and surrounding the outer surface of said silica core. Wherein the outer surface of the mesoporous silica shell has openings leading to pores within the mesoporous silica shell which extend toward the outer surface of said silica core. The catalyst also includes catalytically active metal nanoparticles positioned within the pores proximate to said core, wherein the catalytic metal nanoparticles comprise about 0.0001 wt % to about 1.0 wt % of the catalyst. Also disclosed are methods of making the catalyst and using it to carry out a process for catalytically hydrogenolysizing a polyolefinic polymer.
Sadow, Aaron D.↗