Perrin, Alice E. | Search NASA

DOE OSTI2023

Effect of Mn on eutectic phase equilibria in Al-rich Al-Ce-Ni alloys

Microstructural analysis of additively manufactured (AM) Al-Ce-Ni-Mn alloys has identified phases not predicted from existing ternary liquidus projections in the Al-Ce-Ni system. Because the rapid cooling rate of AM is orders of magnitude above that of traditional casting, it is unclear if these additional phases arose from the non-equilibrium processing conditions of AM, a drastic shift in phase stability in the system due to the addition of 1 wt% Mn, or some combination of these two influences. The phases and microstructure of cast samples of Al-Ce-Ni and Al-Ce-Ni-Mn alloys were characterized for several annealing conditions which revealed the equilibrium phases at different temperatures. Phase analysis confirmed that minute levels of Mn substituted for Ni in the system drastically shifts the liquidus projection in the Al-rich corner of the ternary phase diagram such that the eutectic Al 3 Ni phase is suppressed in favor of the Al 23 Ni 6 (Ce,Mn) 4 phase. Further addition of Mn promotes the formation of Al 20 Mn 2 Ce and Al 10 Mn 2 Ce phases. The phase analysis data was then used to improve the CALPHAD modeling of the liquidus projection and isothermal sections for the Al-rich Al-Ce-Ni-Mn quaternary system. Thermodynamic modeling and experimental analysis on phases in the AM sample of Al-Ce-Ni with Mn confirmed that the phases present are consistent with Mn-containing Al-Ce-Ni cast samples. Here, this investigation demonstrates the potential for using secondary alloying elements to drastically alter phase stability and microstructure in alloy systems.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Stabilized Nanocrystalline Alloys: The Intersection of Grain Boundary Segregation with Processing Science

Processing science for nanocrystalline metals has largely focused on far-from-equilibrium methods that can generate many grain boundaries with excess defect energy. Conversely, the science of stabilizing nanocrystalline alloys has largely focused on the lowering of that excess defect energy through grain boundary segregation, bringing nanocrystalline structures closer to equilibrium. With increasing technological adoption of stabilized nanocrystalline alloys, there is a substantial need for research at the intersection of these two fields. This review lays out the basic thermodynamic issues of the two subfields and surveys the literature on the most common processing methods, including severe plastic deformation, ball milling, physical vapor deposition, and electrodeposition. We provide an overview of studies that have examined grain boundary segregation through each of these methods and identify general themes. We conclude that there is substantial scope for more systematic work at the intersection of these fields to understand how nonequilibrium processing affects grain boundary segregation.

Materials Science↗