Search NASA⌕ Search

Engineering topics

Perry, Bruce

Publications and source records attributed to Perry, Bruce.

Influence of Real Gas Effects on Chemical Kinetics in Oxycombustion in Supercritical Carbon Dioxide

Oxycombustion in supercritical carbon dioxide is an integral part of the Allam Cycle, a technology that enables carbon-neutral use of fossil-fuels and carbon-negative use of biofuels. We simulate oxycombustion in a realistic combustor geometry for two sets of fuel conditions: pure methane, and a 40 percent methane/60 percent carbon dioxide blend, both at 343.15 K. The fuel jet mixes with a preheated swirler of 20 percent oxygen and 80 percent carbon dioxide at 1005.35 K, with a 100 percent carbon dioxide coflow at 783.15 K. The entire system operates at a pressure of 300 bar, putting the entire system above the critical temperature and pressure of carbon dioxide. Simulations are performed using PeleC, a compressible block-structured adaptive-mesh refinement (AMR) reacting flow code. Direct comparison of results using thermodynamically self-consistent implementations of the ideal gas equation of state and the Soave-Redlich-Kwong (SRK) equation of state allow quantification of the real gas impacts on combustion kinetics, flow temperatures, and pollutant formation.

carbon dioxide↗

CMLM (Co-Optimized Machine-Learned Manifolds) [SWR-23-41]

Co-optimized Machine-Learned Manifolds (CMLM) is a data-driven approach for developing reduced-order manifold models for high-dimensional chemically reacting systems. It involves a specially designed neural network, the training of which simultaneously optimizes linear combinations of species that define the manifold, nonlinear mapping to outputs of interest such as reaction rates, and (optionally) subfilter closure for large eddy simulation. This software package provides an implementation of the CMLM approach in Python using the PyTorch machine learning library. A few example cases are included, showing how the tool can be applied to different types of data from 0D and 1D reacting simulations performed using Cantera. The neural networks can be saved in a format that is readable by the Pele suite of combustion solvers for use in reacting computational fluid dynamics simulations. This software repository contains several python scripts to perform various tasks associated with the Co-optimized Machine Learned Manifolds (CMLM) model, which is described in Perry, Henry de Frahan, and Yellapantula, CNF, 2022 (https://doi.org/10.1016/j.combustflame.2022.112286). This includes not only the code that defines the CMLM model, but also scripts to generate suitable training data, scripts to pre-process the data, scripts to train the CMLM model, and scripts to plot the output, as well as various other helper files. The scripts depend on several commonly used python libraries for data analysis and chemical reaction computations. The trained models that result from this tool are designed to work with the an interface being implemented in the Pele suite of reacting flow solvers (https://github.com/AMReX-Combustion).

Perry, Bruce↗

Adaptive Mesh Refinement Simulations for Turbulent Reacting Flow

With the increased availability of exascale computing hardware, detailed simulations of realistic devices can be performed at practically relevant time and length scales. Insights into the multiscale driving mechanisms in compressible reacting flow systems with complex geometry, such as combustors, can be used for design optimization and technology improvements. However, to effectively perform these simulations, advanced numerical algorithms must be used to maintain solution accuracy without incurring undue computational costs. PeleC, part of the Pele suite of codes, leverages block-structured adaptive mesh refinement (AMR) through the AMReX library to capture fine-scale flow features in compressible reacting flows. In this talk, we discuss recent improvements to the numerical algorithms, particularly in regard to describing flows at complex boundary structures, and PeleC's performance on exascale computing hardware. We will demonstrate that PeleC is well-suited for modern, extreme-scale, heterogenous compute platforms.

combustion↗

PeleLMeX: an AMR Low Mach Number Reactive Flow Simulation Code without level sub-cycling

PeleLMeX simulates chemically reacting low Mach number flows with block-structured adaptive mesh refinement (AMR). The code is built upon the AMReX library, which provides the underlying data structures and tools to manage and operate on them across massively parallel computing architectures. PeleLMeX algorithmic features are inherited from its predecessor PeleLM but key improvements allow representation of more complex physical processes. Together with its compressible flow counterpart PeleC, the thermo-chemistry library PelePhysics and the multi-physics library PeleMP, it forms the Pele suite of open-source reactive flow simulation codes.

97 MATHEMATICS AND COMPUTING↗

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor: Preprint

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, alcohol to jet (ATJ) and hydrotreated esters and fatty acids (HEFA), are chosen and their use in a simple, lead direct injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗

ERF: Energy Research and Forecasting

The Energy Research and Forecasting (ERF) code is a new model that simulates the mesoscale and microscale dynamics of the atmosphere using the latest high-performance computing architectures. It employs hierarchical parallelism using an MPI+X model, where X may be OpenMP on multicore CPU-only systems, or CUDA, HIP, or SYCL on GPU-accelerated systems. ERF is built on AMReX (Zhang et al., 2019, 2021), a block-structured adaptive mesh refinement (AMR) software framework that provides the underlying performance-portable software infrastructure for block-structured mesh operations. The "energy" aspect of ERF indicates that the software has been developed with renewable energy applications in mind. In addition to being a numerical weather prediction model, ERF is designed to provide a flexible computational framework for the exploration and investigation of different physics parameterizations and numerical strategies, and to characterize the flow field that impacts the ability of wind turbines to extract wind energy. The ERF development is part of a broader effort led by the US Department of Energy's Wind Energy Technologies Office.

17 WIND ENERGY↗

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2 emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, Alcohol to Jet (ATJ) and Hydrotreated Esters and Fatty Acids (HEFA), are chosen and their use in a simple, Lead Direct Injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗

Examination of a Methane/Diesel RCCI Engine Using Pele: Preprint

Multi-fuel, advanced injection strategies have become increasingly promising as a strategy to mitigate the emissions generated from internal combustion engines. By carefully controlling the combustion phasing in-cylinder, these new multi-pulse, multi-fuel injection strategies are able to burn in the low-temperature combustion regime where both NOx and soot are not readily produced, reducing the need for extensive exhaust gas recirculation systems. In this study, we examine a reactivity-controlled compression ignition (RCCI) strategy that uses an early pre-filled methane-air mixture with low turbulence background as the low-reactivity fuel and a direct injection of four discrete dodecane jets as a surrogate for the high-reactivity diesel fuel. We use the Pele software suite, a highly optimized, exascale-ready, adaptive mesh refinement codebase to perform high-resolution numerical simulations of a scaled down, single cylinder from the RCCI engine. Here, we resolve the ignition kernels down to micrometer scales and present several statistical quantities evaluating the development of the flow and detailing the onset of ignition and subsequent flame development. Particular attention is paid to the conditions surrounding the onset of the first ignition kernels and discussing what led to the development of those conditions.

CFD↗

Iterative Workflow for Quantification and Minimization of Reduced Chemistry-Induced Uncertainties in Reacting Flow Simulation

Reduced chemistry models mitigate computational cost but introduce two sources of uncertainties in reacting flow simulation, including chemical information loss due to model reduction, and approximation errors due to non-optimal projection. We present an iterative workflow for quantification and minimization of reduced chemistry-induced uncertainties in reacting flow simulations.

chemistry↗

High-Fidelity Simulations of Supercritical CO2 Based Oxy-Combustion with Non-Ideal Equation of State

The supercritical carbon dioxide (sCO2) Allam-Fetvedt cycle employs high-temperature oxy-combustion using sCO2 as the working fluid, leading to a unique and challenging environment for materials. In this cycle, pressurized gaseous fuel is combusted in the presence of a hot oxidant flow containing a mixture of CO2 and oxygen and a hot CO2 diluent recycle stream at approximately 300 bar under lean combustion conditions. We present high-fidelity reacting simulations of this oxy-combustor environment and compare the results when performing simulations with ideal and non-ideal equations of state. By doing so, we identify if the combustor behavior at the regime of interest is sensitive enough to the equation of state to justify the added computational cost incurred with a non-ideal equation of state.

equation of state↗

Energy Research and Forecasting (ERF) v1

ERF is a next-generation regional atmospheric modeling code for simulation mesoscale atmospheric flows. Its capabilities include the ability to model advection, diffusion, turbulence, terrain and moisture physics.

Almgren, Ann↗

PeleLMeX [SWR-22-48]

PeleLMeX is a solver for high fidelity reactive flow simulations, namely direct numerical simulation (DNS) and large eddy simulation (LES). The solver combines a low Mach number approach, adaptive mesh refinement (AMR), embedded boundary (EB) geometry treatment and high performance computing (HPC) to provide a flexible tool to address research questions on platforms ranging from small workstations to the world's largest GPU-accelerated supercomputers. PeleLMeX has been used to study complex flame/turbulence interactions in RCCI engines and hydrogen combustion or the effect of sustainable aviation fuel on gas turbine combustion. PeleLMeX is part of the Pele combustion Suite (https://amrex-combustion.github.io/)

Day, Marcus↗

PS-Samp (Phase-Space Sampling)

PS-Samp is a software that reduces a given dataset by pruning data. Data is downselected such that it uniformly spans the phase-space, thereby ensuring that the full dataset is correctly represented. The algorithm relies on estimating the probability map of the data and using it to construct an acceptance probability. The software is designed to handle very large data sets.

Hassanaly, Malik↗

Adaptive mesh based combustion simulations of direct fuel injection effects in a supersonic cavity flame-holder

Here, we present high-fidelity reacting simulations of a supersonic cavity flame-holder configuration. The focus of this work is on flame stabilization brought about by varying the location of fuel injection in a cavity stabilized supersonic flow of air. Central to our approach is a compressible multi-species reacting flow solver that uses adaptive-mesh-refinement (AMR), enabling the resolution of flame, shock-waves, boundary-layers, and small-scale structures in the computational domain. Our analysis indicates that fuel injection closer to the ramp at the aft end of the cavity allows for greater mixing and lower peak temperatures compared to fuel injection upstream that is closer to the backward facing step of the cavity. This difference is mainly due to greater turbulent fluctuations generated from the shear-layer towards the cavity ramp, thereby enhancing the mixing of fuel and air. A low frequency oscillatory behaviour in heat-release and pressure was also observed for the upstream injection case while a much higher-frequency phenomena was observed in the near-ramp injection case. By identifying the important physical determinants of the combustion processes, this study illustrates a promising pathway to design and optimize direct fuel injection strategies in supersonic cavity flame-holders that can improve flame stability, combustion efficiency, and reduce emissions.

42 ENGINEERING↗

Improved Dynamic Modeling of the Cascade Distillation Subsystem and Integration with Models of Other Water Recovery Subsystems

The Cascade Distillation Subsystem (CDS) is a rotary multistage distiller being developed to serve as the primary processor for wastewater recovery during long-duration space missions. The CDS could be integrated with a system similar to the International Space Station (ISS) Water Processor Assembly (WPA) to form a complete Water Recovery System (WRS) for future missions. Independent chemical process simulations with varying levels of detail have previously been developed using Aspen Custom Modeler (ACM) to aid in the analysis of the CDS and several WPA components. The existing CDS simulation could not model behavior during thermal startup and lacked detailed analysis of several key internal processes, including heat transfer between stages. The first part of this paper describes modifications to the ACM model of the CDS that improve its capabilities and the accuracy of its predictions. Notably, the modified version of the model can accurately predict behavior during thermal startup for both NaCl solution and pretreated urine feeds. The model is used to predict how changing operating parameters and design features of the CDS affects its performance, and conclusions from these predictions are discussed. The second part of this paper describes the integration of the modified CDS model and the existing WPA component models into a single WRS model. The integrated model is used to demonstrate the effects that changes to one component can have on the dynamic behavior of the system as a whole.

Perry, Bruce↗

Development of a Higher Fidelity Model for the Cascade Distillation Subsystem (CDS)

Significant improvements have been made to the ACM model of the CDS, enabling accurate predictions of dynamic operations with fewer assumptions. The model has been utilized to predict how CDS performance would be impacted by changing operating parameters, revealing performance trade-offs and possibilities for improvement. CDS efficiency is driven by the THP coefficient of performance, which in turn is dependent on heat transfer within the system. Based on the remaining limitations of the simulation, priorities for further model development include: center dot Relaxing the assumption of total condensation center dot Incorporating dynamic simulation capability for the buildup of dissolved inert gasses in condensers center dot Examining CDS operation with more complex feeds center dot Extending heat transfer analysis to all surfaces

Perry, Bruce↗