Engineering topics

Peterson, Darren J.

Publications and source records attributed to Peterson, Darren J..

8 records

DOE OSTI2024

Feedstock variability impacts the bioconversion of sugar and lignin streams derived from corn stover by Clostridium tyrobutyricum and engineered Pseudomonas putida

Abstract Feedstock variability represents a challenge in lignocellulosic biorefineries, as it can influence both lignocellulose deconstruction and microbial conversion processes for biofuels and biochemicals production. The impact of feedstock variability on microbial performance remains underexplored, and predictive tools for microbial behaviour are needed to mitigate risks in biorefinery scale‐up. Here, twelve batches of corn stover were deconstructed via deacetylation, mechanical refining, and enzymatic hydrolysis to generate lignin‐rich and sugar streams. These batches and their derived streams were characterised to identify their chemical components, and the streams were used as substrates for producing muconate and butyrate by engineered Pseudomonas putida and wildtype Clostridium tyrobutyricum , respectively. Bacterial performance (growth, product titers, yields, and productivities) differed among the batches, but no strong correlations were identified between feedstock composition and performance. To provide metabolic insights into the origin of these differences, we evaluated the effect of twenty‐three isolated chemical components on these microbes, including three components in relevant bioprocess settings in bioreactors, and we found that growth‐inhibitory concentrations were outside the ranges observed in the streams. Overall, this study generates a foundational dataset on P. putida and C. tyrobutyricum performance to enable future predictive models and underscores their resilience in effectively converting fluctuating lignocellulose‐derived streams into bioproducts.

09 BIOMASS FUELS↗

DOE OSTI2024

Feedstock/pretreatment screening for bioconversion of sugar and lignin streams via deacetylated disc-refining

Recent publications have shown the benefits of deacetylation disc-refining (DDR) as a pretreatment process to deconstruct biomass into sugars and lignin residues. Major advantages of DDR pretreatment over steam and dilute acid pretreatment are the removal of acetyl and lignin during deacetylation. DDR does not generate hydroxymethylfurfural (HMF) and furfural which are commonly produced from steam and dilute acid pretreatments. Acetate, lignin, HMF, and furfural are known inhibitors during enzymatic hydrolysis and fermentation. Another advantage of deacetylation is the production of lignin-rich black liquor, which can be upgraded to other bioproducts. Furthermore, due to the lack of sugar degradation during deacetylation, DDR has significantly less sugar loss than other pretreatment methods. Previous studies for DDR have primarily focused on corn stover, but lacked the investigative studies of other feedstocks. This study was designed to screen various DDR process conditions at pilot scale using three different feedstocks, including corn stover, poplar, and switchgrass. The impact of the pretreatment conditions was evaluated by testing hydrolysates for bioconversion to 2,3-butanediol. Pretreatment of biomass by DDR showed high-conversion-yields and 2,3-BDO fermentation production yields. Techno-economic analysis (TEA) of the pretreatment for biomass to sugar was also developed based on NREL’s Aspen Model. This study shows that the cellulose and hemicellulose in poplar was more recalcitrant than herbaceous feedstocks which ultimately drove up the sugar cost. Switchgrass was also more recalcitrant than corn stover but less than poplar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Butyric Acid Production from Delignified Corn Stover Using Thermophilic Bacterial Co-Cultures

Butyric acid (BA) is a valuable platform chemical in the food and pharmaceutical industries, and it is also a potential precursor for the production of biobutanol and sustainable aviation fuels (SAFs). BA is mainly synthesized from petroleum; thus, cost-effective, and sustainable alternatives for its production are attracting the interest of several sectors. The present work proposes a solids-to-acids bioprocess to produce BA from corn stover utilizing a co-culture that consists of two thermophilic bacteria, Clostridium thermocellum, a well-known efficient degrader of insoluble and oligomeric cellulosic substrates, and Clostridium thermobutyricum, a highly efficient BA producer from monomeric sugars. After initial proof of concept experiments, a series of optimization studies were carried out to evaluate the process limits of this co-culture. First, the co-cultivation of both microorganisms at different inoculum sizes in deacetylated and mechanically refined corn stover (DMR) was evaluated. No significant differences were found on the solids deconstruction and carbohydrates utilization among all the treatments. In addition, BA production was similar under all conditions, ranging between 2.1 and 2.4 g/L. Next, the deconstruction, and BA production capabilities of the co-culture at increased DMR solids contents (3, 4.5, and 6% (w/v)) were tested. Although no difference was observed in the solids deconstruction and carbohydrates utilization among treatments, BA production increased concomitantly to solids loading; the maximum values observed were 2.8, 3.6, and 6.2 g/L in the 3, 4.5, and 6% treatments, respectively. In fact, BA production did not reach its absolute maximum in the 6% treatment after 160 h of fermentation. Lastly, a fed-batch experiment was performed to investigate the co-culture capabilities and possible system constraints to achieve higher BA titers. Data on substrate modifications and product formation as well as on the growth of each microorganism will be shown. Results from this work demonstrate a promising bioprocess approach for the production of BA from lignocellulosic biomass using a thermophilic bacterial co-culture.

bacteria↗

DOE OSTI2023

Direct Conversion of Delignified Biomass into Non-Volatile Products Using Thermophilic Bacteria

Butyric acid (BA) can be used as a platform intermediate for diesel and sustainable aviation fuels (SAFs) as well as a precursor for diverse commodity chemicals for the production of polymers, fibers, solvents, and preservatives. This work presents a co-culture-based bioprocess for the production of BA from corn stover by two thermophilic bacteria, Clostridium thermocellum, a well-known efficient degrader of insoluble and oligomeric cellulosic substrates, and Clostridium thermobutyricum, a highly efficient BA producer from monomeric sugars. First, we tested the capability of C. thermocellum to deconstruct three different biomass streams from the NREL pilot plant pretreatment process -raw, deacetylated, and deacetylated and mechanically refined corn stover (DMR)-, and up to 82% solids deconstruction and 91% carbohydrate utilization were obtained when using DMR solids. Then, the sugar utilization and by-product formation capabilities on various substrates by C. thermobutyricum were compared to evaluate its potential as a co-culture partner for C. thermocellum. Model carbon sources -glucose and xylose- were compared to a mixture of substrates present in soluble DMR hydrolysate streams, and the highest cell density as well as the maximum BA titer (8.3 g/L) were observed on DMR hydrolysate. Finally, clostridial co-cultivations on DMR solids were performed to investigate the inoculation time for both organisms that enhances BA production; while C. thermocellum was always inoculated at the beginning of the cultivation, C. thermobutyricum was inoculated at 0, 36, or 72h. It was found that BA production begins immediately upon inoculation of C. thermobutyricum regardless of the inoculation time. However, higher solids deconstruction and carbohydrate utilization results (83.7 and 95.6%, respectively) were obtained when both organisms were inoculated at the beginning of the fermentation. Under those conditions, up to 2.6 g/L of BA were obtained from DMR solids after 120h of cultivation. This work provides relevant information for the sustainable production of BA using thermophilic bacteria.

bacterial co-culture↗

DOE OSTI2021

Process Intensification for the Biological Production of the Fuel Precursor Butyric Acid from Biomass

The production of fuels from lignocellulosic biomass is key to reduce our reliance on petroleum and to promote a sustainable bioeconomy. Butyric acid (BA) is a promising chemical precursor for the production of renewable diesel and jet fuels. BA can be biologically produced from lignocellulosic sugars. However, challenges associated with product selectivity and recovery must be overcome to achieve industrially relevant metrics. Here, we evaluate various fermentation configurations and demonstrate near-homo-butyrate production by using the biocatalyst Clostridium tyrobutyricum. We also develop an advanced in situ product recovery process based on hybrid extraction-distillation (HED-ISPR) and conduct techno-economic analyses and life cycle assessments. We demonstrate that the HED-ISPR process lowers the overall capital and operating expenses and environmental impact compared to other traditional fermentation processes. Overall, BA minimum product selling price from biomass is 55% of the current BA selling price from petroleum, a significant decrease toward viable renewable fuel production.

09 BIOMASS FUELS↗

DOE OSTI2021

Production of itaconic acid from alkali pretreated lignin by dynamic two stage bioconversion

Abstract Expanding the portfolio of products that can be made from lignin will be critical to enabling a viable bio-based economy. Here, we engineer Pseudomonas putida for high-yield production of the tricarboxylic acid cycle-derived building block chemical, itaconic acid, from model aromatic compounds and aromatics derived from lignin. We develop a nitrogen starvation-detecting biosensor for dynamic two-stage bioproduction in which itaconic acid is produced during a non-growth associated production phase. Through the use of two distinct itaconic acid production pathways, the tuning of TCA cycle gene expression, deletion of competing pathways, and dynamic regulation, we achieve an overall maximum yield of 56% (mol/mol) and titer of 1.3 g/L from p -coumarate, and 1.4 g/L titer from monomeric aromatic compounds produced from alkali-treated lignin. This work illustrates a proof-of-principle that using dynamic metabolic control to reroute carbon after it enters central metabolism enables production of valuable chemicals from lignin at high yields by relieving the burden of constitutively expressing toxic heterologous pathways.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Engineered Pseudomonas putida simultaneously catabolizes five major components of corn stover lignocellulose: Glucose, xylose, arabinose, p-coumaric acid, and acetic acid

Valorization of all major lignocellulose components, including lignin, cellulose, and hemicellulose is critical for an economically viable bioeconomy. In most biochemical conversion approaches, the standard process separately upgrades sugar hydrolysates and lignin. Here, we present a new process concept based on an engineered microbe that could enable simultaneous upgrading of all lignocellulose streams, which has the ultimate potential to reduce capital cost and enable new metabolic engineering strategies. Specifically, we engineered Pseudomonas putida, a robust microorganism capable of catabolizing aromatic compounds, organic acids, and D-glucose, to utilize D-xylose and L-arabinose by tuning D-xylose transport and pentose phosphate pathway flux. Distinct L-arabinose pathways enabled D-glucose, D-xylose, and L-arabinose co-utilization in minimal medium using model compounds as well as corn stover hydrolysate. After modifying catabolite repression, our engineered P. putida simultaneously co-utilized five representative compounds from cellulose, hemicellulose, and lignin, demonstrating the feasibility of simultaneously upgrading total lignocellulosic biomass to value-added chemicals.

Elmore, Joshua R.↗

DOE OSTI2020

Metabolic engineering of Pseudomonas putida for increased polyhydroxyalkanoate production from lignin

Corrigendum: In the originally published article by Salvachua et al. (2019), the author Anna Furches was accidentally omitted from the byline of manuscript, ‘Metabolic engineering of Pseudomonas putida for increased polyhydroxyalkanoate production from lignin’ Volume 13, Issue 1, Pages 290–298. The byline should read as given above. https://doi.org/10.1111/1751-7915.13481

59 BASIC BIOLOGICAL SCIENCES↗