Search NASA⌕ Search

Engineering topics

Pfromm, Peter

Publications and source records attributed to Pfromm, Peter.

Step Catalysis to Synthesize Fossil-Free Ammonia at Atmospheric Pressure (Final Technical Report)

Affordable fossil-free ammonia synthesis will enable high-yield sustainable crop production for a growing world population while preserving the planet and making the best use of water and land. Simple technology amenable to intermittent operation using renewable energy will be made available through step catalysis activating dinitrogen at atmospheric pressure by nitride formation. Project objectives: (1) At the single particle level, quantify and analyze N2 activation by doped or alloyed manganese macroscopic- and nano particles at atmospheric pressure, (2) Quantify and analyze ammonia synthesis from doped or alloyed metal nitride particles when contacting them with hydrogen at atmospheric pressure, and (3) Integrate experimental data and atomic-level computational models to predict the behavior of metal alloys in nitrogen activation and subsequent ammonia synthesis.

10 SYNTHETIC FUELS↗

Activation of N 2 on Manganese Nitride-Supported Ni 3 and Fe 3 Clusters and Relevance to Ammonia Formation

Dual-site models were constructed to represent manganese nitride (Mn 4 N)-supported Ni 3 and Fe 3 clusters for NH 3 synthesis. Density functional theory calculations produced an energy barrier of approximately 0.55 eV for N–N bond activation at the interfacial nitrogen vacancy sites (N v ); also, the hydrogenation and removal of interfacial N is promoted by earth-abundant Ni and Fe metals. Steady-state microkinetic modeling revealed that the turnover frequencies of NH 3 production follow an order of Fe 3 @Mn 4 N ≈ Ni 3 @Mn 4 N > Mn 4 N > Fe >> Ni. Moreover, we present clear evidence that, before NH 3 formation, NH migrates from N v onto the metallic sites. Using N binding energy (BE N ) and the transition-state energy of N 2 activation (E TS ) as descriptors, we concluded that the beneficial effects owing to interfacial N v sites are the most pronounced when BE N is either too strong or too weak while E TS is high; otherwise, excessive N v sites may hinder catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenges and Opportunities for Bio-oil Refining: A Review

Bio-oil derived from fast pyrolysis of lignocellulosic materials is among the most complex and inexpensive raw oils that can be produced today. Although commercial or demonstration scale fast pyrolysis units can readily produce this oil, this industry has not grown to significant commercial impact due to the lack of bio-oil market pull. This paper is a review of the challenges and opportunities for bio-oil upgrading and refining. Pyrolysis oil consists of six major fractions. (water 15-30 wt.%, light oxygenates, 8-26 wt.%. mono-phenols, 2-7 wt.%, water insoluble oligomers derived from lignin 15-25wt.%, and water soluble havey molecules 10-30 wt.%). The composition of water-soluble oligomers is relatively poorly studied. In the 1880s, bio-oil refining (formally known as wood distillation) targeted the separation and commercialization of C1-C4 light oxygenated compounds to produce methanol, acetic acid and acetone with the commercialization of the lignin derived water insoluble fraction for preserving wooden sailing vessels against rot. More recently the company Ensyn extracted and commercialized condensed natural smoke as a food additive. Most research efforts in the last twenty years have focused on the two-step hydrotreatment concept for the production of transportation fuels. In spite of major progress this concept remains at the demonstration. In this review, the opportunities and progress to separate bio-oil fractions and chemicals, mainly acetic acid (HAc), hydroxyacetaldehyde (HHA) and acetol, and convert them into value added co-products are thoroughly discussed. In spite of the large number of separation schemes and products tested, very few of them have been studied as part of fully integrated bio-oil refinery concepts. Furthermore, the synthesis, techno-economic and environmental evaluation of novel integrated bio-oil refinery concepts is likely to become a subject of intense research activity in the coming years.

09 BIOMASS FUELS↗

Beyond fossil fuel–driven nitrogen transformations

Nitrogen is fundamental to all of life and many industrial processes. The interchange of nitrogen oxidation states in the industrial production of ammonia, nitric acid, and other commodity chemicals is largely powered by fossil fuels. Here, a key goal of contemporary research in the field of nitrogen chemistry is to minimize the use of fossil fuels by developing more efficient heterogeneous, homogeneous, photo-, and electrocatalytic processes or by adapting the enzymatic processes underlying the natural nitrogen cycle. These approaches, as well as the challenges involved, are discussed in this Review.

09 BIOMASS FUELS↗

Fe and Ni Dopants Facilitating Ammonia Synthesis on Mn 4 N and Mechanistic Insights from First-Principles Methods

Cyclic step-catalysis enables intermittent, atmospheric ammonia production, and can be integrated with sustainable and renewable energy sources. By employing metal (e.g., Mn) nitride, a nitrogen carrier, the rate-limiting N 2 activation step is bypassed. In this work, molecular-level pathways, describing the reduction of Mn 4 N by dissociatively adsorbed hydrogen, were investigated using periodic density functional theory (DFT). The established mechanism confirmed that Fe and Ni doped in the nitride sublayer and top layer can disturb local electronic structures and be exploited to tune the ammonia production activity. The strength of N–M (M = Mn, Fe, Ni) and H–M bonds both determine the overall reduction thermochemistry. DFT-based modeling further showed that the low concentration of Fe or Ni in the Mn 4 N sublayer facilitates N diffusion by lowering the diffusion energy barrier. Also, these heteroatom dopant species, particularly Ni, decrease the reduction endergonicity, thanks to the strong hydrogen binding with the surface Ni dopant. The Brønsted–Evans–Polanyi relationship and linear scaling relationships have been developed to reveal ammonia evolution kinetic and energetic trends for a series of idealized Fe- and Ni-doped Mn 4 N. Finally, deviations from the linear scaling relationship have been observed for certain doped systems, indicating potentially more complex behaviors of metal nitrides and intriguing promises for greater ammonia synthesis materials design opportunities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗