Search NASASearch

Engineering topics

Philipson, W. R.

Publications and source records attributed to Philipson, W. R..

At least 19 records

Thermal sensing for characterizing the contents of waste storage drums

The present investigation is concerned with the feasibility to employ remote sensing for the characterization of the contents of liquid chemical waste storage drums. Philipson et al. (1981) had found that, when the air temperature is changing rapidly, differences in the thermal inertia of the drum contents can lead to detectable differences in the skin temperature of the drums. Thus, postsunset, airborne thermal remote sensing could potentially provide some level of discrimination among chemical storage drums. Discrimination should be possible among steel drums filled largely with: (1) aqueous solvents, (2) organic solvents, or (3) clay packing materials. The response of a drum filled with clay packing materials should be similar to that of an empty drum. The reported study had the objective to verify the theoretical findings, taking into account the use of a hand-held infrared radiometer. It was found that under the proper conditions the temperature differences among drums with the three different types of contents will be significant and consistent.

Philpot, W. D.

Remote sensing program

Built on Cornell's thirty years of experience in aerial photographic studies, the NASA-sponsored remote sensing program strengthened instruction and research in remote sensing, established communication links within and beyond the university community, and conducted research projects for or with town, county, state, federal, and private organizations in New York State. The 43 completed applied research projects are listed as well as 13 spinoff grants/contracts. The curriculum offered, consultations provided, and data processing facilities available are described. Publications engendered are listed including the thesis of graduates in the remote sensing program.

Philipson, W. R.

Remote Sensing Program

Field spectroradiometric and airborne multispectral scanner data were related to vineyard yield and other agronomic variables in an attempt to determine the optimum wavelengths for yield prediction modeling. Reflections between vine canopy reflectance and several management practices were also considered. Spectral analysis of test vines found that, although some correlations with vine yield were significant, they were inadequate for producing a yield prediction model. The findings also indicate that the vines examined through the field spectroradiometers were not truly representative. Geologic linears identified from aerial photographys, LANDSAT images, and maps were compared to gas well locations in three New York' counties. Correlations were found between the dominant trends in regional liners and gas field boundaries and trends. Other projects being conducted under the grant include determining vegetable acreage in mucklands, site selection for windmills, spectral effects of sulfur dioxide, and screening tomato seedlings for salt tolerance.

Philipson, W. R.

Analysis of Landsat for monitoring vegetables in New York mucklands

This pilot study assessed the feasibility of relying on Landsat multispectral scanner data for inventorying vegetables grown in mucklands,in variably shaped, variably sized fields. Classification of muckland vegetables using a Euclidean distance classifier and a parallelepiped classifier was performed with reasonable accuracy (generally over 60 percent) based on only one date of Landsat data. Prior canonical and principal component analyses did not improve the classification accuracy but did reduce the dimensionality of the data.

Zhu, M. H.

Landsat detection of hardwood forest clearcuts

In a study of hardwood forests in Pennsylvania, the detection of clearcuts by means of visual analysis of Landsat summer imagery was accomplished best using band 5 images; however, a higher percentage of clearcuts could be detected using bands 5 or 7 winter images acquired during periods of snow cover.

Hafker, W. R.

Developing lake sampling strategies with existing Landsat data

On the basis of the assumptions that Landsat image densities relate to water quality, that lake densities can be modeled, and that homogeneous water quality areas can therefore be predicted, a method is developed for the selection of optimum water quality sampling locations on Oneida Lake in central New York. Patterns of Oneida Lake density on 24 Landsat band 5 images were traced from the screen of a density slicer, and the lake was gridded into 161 1.25 X 1.25-km cells, with image density levels encoded for each cell. Cell density levels were then employed as the dependent variable in correlations and multiple regression equations with degree days, resultant wind speed, and resultant direction. Cell density levels were averaged over two-week periods, and the averages were correlated with water quality measurements.

Philipson, W. R.

Grapevine canopy reflectance and yield

Field spectroradiometric and airborne multispectral scanner data were applied in a study of Concord grapevines. Spectroradiometric measurements of 18 experimental vines were collected on three dates during one growing season. Spectral reflectance, determined at 30 intervals from 0.4 to 1.1 microns, was correlated with vine yield, pruning weight, clusters/vine, and nitrogen input. One date of airborne multispectral scanner data (11 channels) was collected over commercial vineyards, and the average radiance values for eight vineyard sections were correlated with the corresponding average yields. Although some correlations were significant, they were inadequate for developing a reliable yield prediction model.

Minden, K. A.

An analysis of Seasat SAR for detecting geologic linears

The value of Seasat synthetic aperture radar (SAR) imagery for detecting geologic linears was assessed in a study of an 89,000 sq km section of New York's Adirondack Mountains. A photographic print of optically processed, 1:500,000 scale SAR imagery (one look direction) was analyzed visually, and the detected linears were compared to those recorded on a 1:250,000 scale geologic map. Eighty percent of the 4,170 km of mapped, geologic linears were detected with the SAR imagery. Moreover, nearly 6,900 km of unmapped linears were also detected. Of these, an estimated 90 percent could be observed on high altitude aerial photographs. The relationship between SAR image detection of linears and the different types of indicators (e.g., straight valleys or shorelines) is reported.

Yan, S.-Y.

Manual versus digital Landsat analysis for delineating river flooding

It has been found that flood boundary information derived from Landsat images, acquired at different flood stages, could be used to develop an empirical model for estimating the extent of flooding on the basis of in situ measurements of river discharge. An investigation was undertaken to determine whether improved results might have been obtained through digital image analysis or by including other Landsat spectral bands. The study area encompasses a highly flood-prone reach of the Black River in Lewis County, NY. It was found that visual analysis of aerial photographs and a Landsat band 7 image gave similar results. Visual and digital analysis of Landsat band 7 data gave similar results, and digital analysis of Landsat band 7 data gave results which were at least as good as digital analysis of combinations of spectral bands.

Philipson, W. R.

Analysis of landfills with historic airphotos

An investigation is conducted regarding the value of existing aerial photographs for waste management, including landfill monitoring. The value of historic aerial photographs for documenting landfill boundaries is shown in a graph in which the expansion of an active landfill is traced over a 40-year period. Historic aerial photographs can also be analyzed to obtain general or detailed land-use and land-cover information. In addition, the photographs provide information regarding other elements of the physical environment, including geology, soils, and surface and subsurface drainage. The value of historic photos is discussed, taking into account applications for inventory, assessing contamination/health hazards, planning corrective measures, planning waste collection and facilities, developing inactive landfills, and research concerning improved land-filling operations.

Erb, T. L.

Manual versus digital Landsat analysis for modeling river flooding

The comparative value of manual versus digital image analysis for determining flood boundaries is being examined in a study of the use of Landsat data for modeling flooding of the Black River, in northern New York. The work is an extension of an earlier study in which Black River flooding was assessed through visually interpreted, multi-date Landsat band 7 images. Based on the results to date, it appears that neither color-additive viewing nor digital analysis of Landsat data provide improvement in accuracy over visual analysis of band 7 images, for delineating the boundaries of flood-affected areas.

Philipson, W. R.

Ground level reflectance measurement techniques - An evaluation with emphasis on the importance of spectral calibration

The bandpasses, overflight conditions, and sensor geometry that will provide optimum target discrimination in remote-sensing studies can be determined only from spectral reflectance measurements made for various sun-target-sensor geometries, supplemented by model calculations which can be checked against field data. The accurate measurement of ground reflectance properties is critical to the design of future sensors and to the determination of imaging conditions. The current investigation has the objective to review typical methods of measuring spectral reflectance, to point out some of the problems inherent to reflectance measuring techniques, and to present a method of checking measurement accuracy.

Duggin, M. J.

Field measurement of spectral reflectance

It is pointed out that success in acquiring remote sensing data for describing a given target, such as vegetation, is contingent upon an understanding of the reflectance properties of the target and its surroundings. Field measurements of a target's spectral reflectance are in most cases made with single-beam instruments by sequentially viewing the target and a white standard reflector, which is assumed to be Lambertian. Since variation in atmospheric transmission can occur between the times of measuring the target and the standard reflector, substantial errors in reflectance calculated from these measurements may result. To preclude this possibility the irradiance on, and the radiance reflected from, the target must be measured simultaneously. Measurements of the spectral hemispherical-conical reflectance of a target are made by simultaneously measuring irradiance and radiance with pairs of portable spectroradiometers. The techniques for calibrating the instruments and for collecting and analyzing spectral reflectance data on vegetative canopies are described. Significant instrumental sources of error and their magnitude are discussed, together with problems involved in making such measurements.

Duggin, M. J.

Remote sensing for forest applications in New York: Two case studies

Under-utilized forest resources in the Northeast can supply fiber to new markets. Information on forest resources, however, is often too aggregated to estimate available woody material with sufficient detail for planning specific projects. Over the past year, staff of Cornell University's Remote Sensing Program, under a grant from NASA, assisted New York State agency personnel by assessing available woody material for two potential development projects, a wood-fired power plant and a particle board manufacturing plant. These feasibility studies are reviewed, illustrating how information derived from high-altitude aircraft photographs, LANDSAT imagery, and available supporting data were integrated to arrive at estimates of woody material.

Stanturf, J. A.

Cornell University remote sensing program

High altitude, color infrared aerial photography as well as imagery from Skylab and LANDSAT were used to inventory timber and assess potential sites for industrial development in New York State. The utility of small scale remotely sensed data for monitoring clearcutting in hardwood forests was also investigated. Consultation was provided regarding the Love Canal Landfill as part of environment protection efforts.

Liang, T.

Appendix E: Research papers. Analysis of landfills with historic airphotos

The nature of landfill-related information that can be derived from existing, or historic, aerial photographs, is reviewed. This information can be used for conducting temporal assessments of landfill existence, land use and land cover, and the physical environment. As such, analysis of low cost, readily available aerial photographs can provide important, objective input to landfill inventories, assessing contamination or health hazards, planning corrective measures, planning waste collection and facilities, and developing on inactive landfills.

Liang, T.

Appendix E: Research papers. Manual versus digital LANDSAT analysis for modeling river flooding

The comparative value of manual versus digital image analysis for determining flood boundaries is being examined in a study of the use of LANDSAT data for modeling flooding of the Black River, in northern New York. The work is an extension of an earlier study in which Black River flooding was assessed through visually interpreted, multi-date LANDSAT band 7 images. Based on the results to date, it appears that neither color-additive viewing nor digital analysis of LANDSAT data provide improvement in accuracy over visual analysis of band 7 images, for delineating the boundaries of flood-affected areas.

Philipson, W. R.