Engineering topics
Phillpot, Simon R.
Publications and source records attributed to Phillpot, Simon R..
Solar Thermochemical Redox Cycling Using Ga- and Al-Doped LSM Perovskites for Renewable Hydrogen Production
Solar thermochemical hydrogen production using redox-active metal oxides is a promising pathway for the production of green hydrogen and synthetic fuel precursors. Herein, the perovskite material (La 0.6 Sr 0.4 ) 0.95 Mn 0.8 Ga 0.2 O 3–δ (LSMG6482) is identified as a promising metal oxide for thermochemical water splitting. LSMG6482, along with more-established water splitters ceria and (La 0.6 Sr 0.4 ) 0.95 Mn x Al 1–x O 3–δ (LSMA) perovskites, is experimentally characterized via thermogravimetric (TGA) analysis and high-temperature water splitting in a reactor simulating solar concentrating conditions. TGA analysis demonstrated that LSMG6482 has high and stable oxygen exchange capacity under controlled pO 2 redox cycling, demonstrated by large changes in oxygen nonstoichiometry (δ) relative to ceria. Water splitting experiments using laser heating (T red = 1400 °C, T ox = 1200 °C) resulted in H 2 yields of 165.1 μmol g –1 for the candidate LSMG6482 composition, exceeding that of all benchmark materials tested. Under high conversion oxidation conditions, where H 2 is cointroduced with H 2 O (150 ≤ nH 2 O/nH 2 ≤ 500), H 2 yields were greatest for LSMG6482 and LSMA6482, up to four times that of ceria at the highest nH 2 O/nH 2 conditions. Crystallographic analysis showed that over the course of experimentation, there is some secondary phase growth for all perovskite compositions, except for LSMA6482, but there was no observable degradation in H 2 yields.
Friends or Foes: Fundamental Principles of Th-Organic Scaffold Chemistry Using Zr-Analogs as a Guide
The fundamental interest in actinide chemistry, particularly for the development of thorium-based materials, is experiencing a renaissance owing to the recent and rapidly growing attention to fuel cycle reactors, radiological daughters for nuclear medicine, and efficient nuclear stockpile development. Herein, we uncover fundamental principles of thorium chemistry on the example of Th-based extended structures such as metal–organic frameworks in comparison with the discrete systems and zirconium extended analogs, demonstrating remarkable over two-and-half-year chemical stability of Th-based frameworks as a function of metal node connectivity, amount of defects, and conformational linker rigidity through comprehensive spectroscopic and crystallographic analysis as well as theoretical modeling. Despite exceptional chemical stability, we report the first example of studies focusing on the reactivity of the most chemically stable Th-based frameworks in comparison with the discrete Th-based systems such as metal–organic complexes and a cage, contrasting multicycle recyclability and selectivity (>97%) of the extended structures in comparison with the molecular compounds. Altogether, the presented work not only establishes the conceptual foundation for evaluating the capabilities of Th-based materials but also represents a milestone for their multifaceted future and foreshadows their potential to shape the next era of actinide chemistry.
LaMnO 3 Dopants for Efficient Thermochemical Water Splitting Identified by Density Functional Theory Calculations
While ceria is the standard material for two-step water splitting, perovskites are emerging as viable alternatives. In this work, based on the orthorhombic LaMnO 3 supercell, we substitute Li Na K Rb Mg Ca Sr Ba on the A-sites (La sites) and Al Ga In Mg Zn on the B-sites (Mn sites) at a concentration of 37.5%. The range of temperature and oxygen partial pressure at which each composition is stable is predicted. For compositions that are stable in relevant temperature and pressure ranges, the oxygen vacancy formation energies are determined for all of the oxygen vacancy site positions available in the computational supercell. Mg, Ca, Sr, and Ba A-site-substituted LaMnO 3 and Al and In B-site-substituted LaMnO 3 meet these two criteria for candidates in solar-thermal water splitting applications. Finally, oxygen vacancy formation energy can also be controlled by adjusting the doping strategy.
Binding of radionuclides and surrogate to 18-crown-6 ether by density functional theory
For this work, we use density functional theory to investigate the interactions of cerium, americium, and curium cations with crown ethers. Our calculations reveal that the modeled structure of cerium integrated within the crown ether is in good agreement with experimental data, with the negative binding energy indicating that capturing the cerium nitrates is thermodynamically favorable. Our results demonstrate that crown ethers can also bind americium and curium, providing insights into the potential applications of crown ether in radionuclide sequestration. Finally, we explore the impact of the skeleton modification of different crown ethers through by substitution of nitrogen atoms in the core of the crown ether for oxygen atoms and find that this structural modification significantly increases the radionuclide binding energies. These findings provide insights on the potential for the use of organic linkers such as crown ethers to address the urgent needs in radionuclide sequestration, separation and sensing.
Energetics and diffusion kinetics of point defects in MnCr2O4 spinel from first principles
Not Available
Binding of uranyl cations to a Zr-based metal-organic framework by density functional theory
Zr-based metal–organic frameworks (Zr-MOFs) have been widely used as ion adsorbents for the removal or extraction of toxic and/or radionuclide species from aqueous solutions. However, the mechanisms by which uranyl cations (UO 2 2+ ) interact with Zr-MOFs have not been established. In this work, the nature of the bonding of uranyl cations with a Zr-MOF was determined using density functional theory for nineteen structurally distinct candidate complexes. Further, the results showed that in all cases the binding energy was of the order of 1.5 eV, but depended on the specific bonding site. The most stable structure involved coordination of the uranyl cation and two structurally distinct oxygens in the Zr-MOF metal node. It was also found that higher degree of deprotonation in Zr-MOF correlated with higher binding energy between the Zr-MOF and uranyl cations. These insights can aid in the design of Zr-MOFs with optimized features for efficient capture of uranyl cations.
A phase-field study of stainless-steel oxidation from high-temperature carbon dioxide exposure
An electrochemical phase-field model has been developed to investigate the oxidation mechanisms of the 21-2N valve stainless steel alloy exposed to carbon dioxide at 973 K. Three oxide phases observed in oxidation experiments are included in the model: Mn 3 O 4 , Cr 2 O 3 , and MnCr 2 O 4 . Local charge neutrality and the conserved current condition are assumed to include the impact of the electric potential on oxidation, though it is found to be negligible when the system is electrically isolated. The sensitivity of the oxidation processes to the values of the diffusion mobilities is examined, and the oxidation rate is calibrated against experimental data by modifying the sensitive mobilities. We find that both inward oxygen and outward metal diffusion are important for oxidation. Furthermore, by investigating the impact of the order of the initial oxide layers, we find that Cr 2 O 3 serves as a barrier to outward Mn diffusion. Moreover, controlling the initial oxide layer order can be used to limit oxidation.
f‐ block MOFs: A Pathway to Heterometallic Transuranics
Abstract A novel series of heterometallic f ‐block‐frameworks including the first examples of transuranic heterometallic 238 U/ 239 Pu‐metal–organic frameworks (MOFs) and a novel monometallic 239 Pu‐analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)‐MOF formation and reported the first value of a U‐to‐Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid‐state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An‐integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An‐containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.
f‐ block MOFs: A Pathway to Heterometallic Transuranics
Abstract A novel series of heterometallic f ‐block‐frameworks including the first examples of transuranic heterometallic 238 U/ 239 Pu‐metal–organic frameworks (MOFs) and a novel monometallic 239 Pu‐analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)‐MOF formation and reported the first value of a U‐to‐Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid‐state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An‐integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An‐containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.
Capture Instead of Release: Defect-Modulated Radionuclide Leaching Kinetics in Metal–Organic Frameworks
Comparison of defect-controlled leaching-kinetics modulation of metal–organic frameworks (MOFs) and porous functionalized silica-based materials was performed on the example of a radionuclide and radionuclide surrogate for the first time, revealing an unprecedented readsorption phenomenon. On a series of zirconium-based MOFs as model systems, we demonstrated the ability to capture and retain >99% of the transuranic 241 Am radionuclide after 1 week of storage. Here, we report the possibility of tailoring radionuclide release kinetics in MOFs through framework defects as a function of postsynthetically installed organic ligands including cation-chelating crown ether-based linkers. Based on comprehensive analysis using spectroscopy (EXAFS, UV–vis, FTIR, and NMR), X-ray crystallography (single crystal and powder), and theoretical calculations (nine kinetics models and structure simulations), we demonstrated the synergy of radionuclide integration methods, topological restrictions, postsynthetic scaffold modification, and defect engineering. This combination is inaccessible in any other material and highlights the advantages of using well-defined frameworks for gaining fundamental knowledge necessary for the advancement of actinide-based material development, providing a pathway for addressing upcoming challenges in the nuclear waste administration sector.
Resonant interaction between phonons and PbTe/PbSe (001) misfit dislocation networks
Here this work aims at a quantitative and mechanistic understanding of the dynamic process of the phonon-dislocation interaction in PbTe/PbSe (001) heterostructures using the Concurrent Atomistic-Continuum (CAC) method as the simulation tool. The misfit dislocation network and the atomic-scale dislocation core structure obtained in the simulations are found to agree reasonably well with the experimental observations of the PbTe/PbSe (001) interface. Through visualizing the dynamic interaction between phonons and dislocations, as well as quantifying the dislocation vibration amplitude, the phonon energy transmission, and the thermal resistance of the misfit interfaces, this work has illustrated and quantified two mechanisms for phonon-dislocation interaction: (1) phonon scattering by the strain field of dislocations, and (2) phonon scattering by dislocations that vibrate via the local modes of a dislocation network; the latter, leads to resonant phonon-dislocation interaction, which is manifested as local maxima of out-of-phase vibration of the atoms on the two sides of the slip plane, leading to local minima of the energy transmission in the heterostructure that contains one interface. The local vibrational modes are found to be excited only by shear stress induced by transverse phonons. Among various resonant modes, the one with the lowest frequency has the strongest effect. This work has also demonstrated the collective motion of dislocations under ultrafast phonon pulses. In addition, the dynamic properties of the misfit dislocation network localized within one interface are found to be significantly altered by the presence of misfit dislocations at other interfaces, thus further confirming the cooperative dynamic nature of the motion of dislocations and phonons.
The effect of stress on the migration of He gas bubbles under a thermal gradient in Fe by phase-field modeling
Here a phase-field model is parameterized to study the effect of elastic stresses on the migration of He gas bubbles in Fe under a temperature gradient. Stresses caused by the gas bubble pressure and residual stress in the Fe matrix are considered. The dependence of He bubble migration velocity on the magnitude of the residual stress, average temperature, temperature gradient, and bubble size is measured. In agreement with a theoretical model based on surface diffusion, simulation results demonstrate that He bubbles move towards the high temperature region with velocities in Fe that are orders of magnitude faster than previously reported in UO 2 . It is found that local stresses in the matrix caused by the He bubble have negligible effect on the bubble migration process; however, residual stresses in the Fe matrix, potentially caused by processing or irradiation, can modestly modify bubble kinetics through pressure dependence of the He diffusion coefficients. Compressive residual stress decreases diffusion coefficients for bulk and surface diffusion mechanisms, thus reducing the migration velocity of the gas bubble. In contrast, tensile residual stress increases the diffusion coefficients, resulting in an increase in the gas bubble migration velocity. This pressure dependence is also consistent with a theoretical model. This phase field model lays the foundation for analysis of bubble coalescence-induced fracture in He bubble-containing steels.
Leaching Model of Radionuclides in Metal-Organic Framework Particles
Metal-organic frameworks (MOFs) have been used to sequester radionuclides and seal them inside of porous scaffolds using postsynthetic modification procedures. Experiments show that certain Zr-MOF with different capping linkers significantly affects the radionuclide release kinetics. In this work, we developed a leaching model of radionuclides in Zr-MOF particles. The model assumes that uranyl species occupy two energetically favored sites: the metal node and the MOF pores. For a given overall concentration of uranyl species, the partitions of uranyl species at the metal nodes and within the pores are determined by their chemical potentials. The model also considers the effect of particle surface and concentration on chemical potentials and diffusivity. The effects of spatial and structural dependent chemical potentials and diffusivity as well as particle sizes on leaching kinetics are investigated with the model. Predicted and measured uranyl leaching kinetics in Zr-MOF particles under batch experiments are compared. The results demonstrate the model’s capability for exploring the mechanisms of leaching and provide guidance for material design.
Thermal conductivity of the n = –5 and 10 members of the (SrTiO 3 ) n SrO Ruddlesden–Popper superlattices
Unlike many superlattice structures, Ruddlesden–Popper phases have atomically abrupt interfaces useful for interrogating how periodic atomic layers affect thermal properties. Here, we measure the thermal conductivity in thin films of the n = 1–5 and 10 members of the (SrTiO 3 ) n SrO Ruddlesden–Popper superlattices grown by molecular-beam epitaxy and compare the results to a single crystal of the n = 1 Ruddlesden–Popper SrLaAlO 4 . The thermal conductivity cross-plane to the superlattice layering (k 33 ) is measured using time-domain thermoreflectance as a function of temperature and the results are compared to first-principles calculations. The thermal conductivity of this homologous series decreases with increasing interface density. Characterization by x-ray diffraction and scanning transmission electron microscopy confirms that these samples have a Ruddlesden–Popper superlattice structure.
Heterometallic Actinide‐Containing Photoresponsive Metal‐Organic Frameworks: Dynamic and Static Tuning of Electronic Properties
Abstract Acquiring fundamental knowledge of properties of actinide‐based materials is a necessary step to create new possibilities for addressing the current challenges in the nuclear energy and nuclear waste sectors. In this report, we established a photophysics–electronics correlation for actinide‐containing metal‐organic frameworks (An‐MOFs) as a function of excitation wavelength, for the first time. A stepwise approach for dynamically modulating electronic properties was applied for the first time towards actinide‐based heterometallic MOFs through integration of photochromic linkers. Optical cycling, modeling of density of states near the Fermi edge, conductivity measurements, and photoisomerization kinetics were employed to shed light on the process of tailoring optoelectronic properties of An‐MOFs. Furthermore, the first photochromic MOF‐based field‐effect transistor, in which the field‐effect response could be changed through light exposure, was constructed. As a demonstration, the change in current upon light exposure was sufficient to operate a two‐LED fail‐safe indicator circuit.
Heterometallic Actinide-Containing Photoresponsive Metal-Organic Frameworks: Dynamic and Static Tuning of Electronic Properties
Acquiring fundamental knowledge of properties of actinide-based materials is a necessary step to create new possibilities for addressing the current challenges in the nuclear energy and nuclear waste sectors. Here in this report, we established a photophysics–electronics correlation for actinide-containing metal-organic frameworks (An-MOFs) as a function of excitation wavelength, for the first time. A stepwise approach for dynamically modulating electronic properties was applied for the first time towards actinide-based heterometallic MOFs through integration of photochromic linkers. Optical cycling, modeling of density of states near the Fermi edge, conductivity measurements, and photoisomerization kinetics were employed to shed light on the process of tailoring optoelectronic properties of An-MOFs. Furthermore, the first photochromic MOF-based field-effect transistor, in which the field-effect response could be changed through light exposure, was constructed. As a demonstration, the change in current upon light exposure was sufficient to operate a two-LED fail-safe indicator circuit.