Pidcoke, L. H. | Search NASA

NASA NTRS1988

Three-dimensional axisymmetric ball model for the PC-TAP program

Spherical-geometry solids' thermal modeling is presently undertaken with a three-dimensional FEM method that can be used in conjunction with the IBM-PC Thermal Analyzer Program (TAP). The elements of the model's nodal network are spherical triangles having approximately equivalent volumes for transient cases, thereby decreasing computer run times. Attention is given to results for the three test cases to which the model has been applied, which are compared with results from analytical closed-form solutions. Absolute temperature errors not greater than 1 percent are indicated by the comparisons.

Pidcoke, L. H.↗

NASA NTRS1988

Boiling oxygen experimental studies in an electrically heated tube

An experimental study was made of subcooled flow boiling with LOX; data were obtained with thermocouples attached to the walls of an electrically heated tube through which the LOX flowed. Pressure levels in the tube ranged from 200 psia to supercritical values, and the cooling level varied from the saturated condition to 50 F. Reynolds numbers ranged from 1.5 x 10 to 3.5 x 10 to the 5th. Results show that an increase in either pressure, subcooling level, or Reynolds number produces an increase in the film boiling heat transfer coefficient. Data for this range of parameters were found to correlate in terms of the Stanton number vs (T sub w - T sub s)/(T sub s - T sub b), where T is temperature, w is the wall, s is the saturated condition, and b is the bulk.

Peroulias, C.↗