Search NASA⌕ Search

Engineering topics

Pieters, C.

Publications and source records attributed to Pieters, C..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The importance of environmental conditions in reflectance spectroscopy of laboratory analogs for Mars surface materials

Reflectance spectra are presented here for a variety of particulate, ferric-containing analogs to Martian soil (Fe(3+)-doped smectites and palagonites) to facilitate interpretation of remotely acquired spectra. The analog spectra were measured under differing environmental conditions to evaluate the influence of exposure history on water content and absorption features due to H2O in these samples. Each of these materials contains structural OH bonded to metal cations, adsorbed H2O, and bound H2O (either in a glass, structural site, or bound to a cation). Previous experiments involving a variety of Mars analogs have shown that the 3 micron H2O band in spectra of palagonites is more resistant to drying than the 3 micron H2O band in spectra of montmorillonites. Other experiments have shown that spectra of ferrihydrite and montmorillonites doped with ferric sulfate also contain sufficient bound H2O to retain a strong 3 micron band under dry conditions. Once the effects of the environment on bound water in clays, oxides, and salts are better understood, the hydration bands measured via reflectance spectroscopy can be used to gain information about the chemical composition and moisture content of real soil systems. Such information would be especially useful in interpreting observations of Mars where subtle spatial variations in the strengths of metal-OH and H2O absorptions have been observed in telescopic and ISM spectra. We measured bidirectional reflectance spectra of several Mars soil analogs under controlled environmental conditions to assess the effects of moisture content on the metal-OH and H2O absorptions. The samples analyzed include chemically altered montmorillonites, ferrihydrite. and palagonites from Hawaii and Iceland. Procedures for preparation of the cation-exchanged montmorillonites, ferric-salt doped montmorillonites, and ferric oxyhydroxides are described in detail elsewhere.

Bishop, J.↗
NASA NTRS1991

Orientale and South Pole-Aitken basins on the Moon: Preliminary Galileo imaging results

During the Earth-Moon flyby the Galileo Solid State Imaging System obtained new information on the landscape and physical geology of the Moon. Multicolor Galileo images of the Moon reveal variations in color properties of the lunar surface. Using returned lunar samples as a key, the color differences can be interpreted in terms of variations in the mineral makeup of the lunar rocks and soil. The combined results of Apollo landings and multicolor images from Galileo allow extrapolation of surface composition to areas distant from the landing sites, including the far side invisible from Earth.

Head, J.↗
NASA NTRS1979

Lunar multispectral maps - Part II of the lunar nearside

Images of the lunar surface are being obtained at several wavelengths using a silicon vidicon imaging system and ground-based telescopes. These images are recorded and processed in digital form so that quantitative information is preserved; their photometric precision has been shown to be 1% or better. Ratio images, calculated by dividing those obtained at two wavelengths (0.40/0.56 and 0.95/0.56 micron), were presented in an earlier article, and more are presented here for a total coverage of about 60% of the lunar frontside. Spatial resolution is about 2 km at the subearth point. A complex of distinct units is evident in the images. Earlier work with the reflectance spectrum of lunar materials indicates that for the most part these units are compositionally distinct. These digital images are being used by lunar geologists to interpret the history of the lunar surface.

Mccord, T. B.↗
NASA NTRS1978

Mare Crisium - Regional stratigraphy and geologic history

Spectral reflectance measurements of five Luna 24 samples and new telescopic reflectance spectra of 10-20 km areas of seven sites in Mare Crisium have been used to calibrate multispectral images of mare units. Based on these data, three major mare units are defined in the Crisium basin and their stratigraphy is interpreted. The oldest mare unit is exposed in the ejecta of the craters Picard and Peirce and along the outer edge of the southeastern part of the basin. The next younger unit includes the Luna 24 site and generally follows a topographic annulus along the basin margin. The youngest mare unit occupies the central part of the basin. It is concluded that subsidence occurred throughout the emplacement of mare units, including extensive warping and downfaulting of the inner part of the Crisium basin.

Adams, J. B.↗
NASA NTRS1978

Definition and detailed characterization of lunar surface units using remote observations

Remote sensing techniques are reviewed in terms of their application to the study of the lunar surface. These techniques include: reflectance spectroscopy (UV and IR), X-ray and gamma-ray analysis, alpha-particle spectroscopy, thermal emission, polarimetry, photography, and visual observation. Each technique is indexed with respect to its usefulness in either describing the appearance and location of a feature, classifying the feature in terms of a broader category, or supplying additional quantitative data. Special attention is given to the mare deposits of the Imbrium basin.

Head, J. W.↗
NASA NTRS1978

Regional stratigraphy and geologic history of Mare Crisium

Remote sensing and Luna 24 sample data are used to develop a summary of the regional stratigraphy and geologic history of Mare Crisium. Laboratory spectra of Luna 24 samples, telescopic reflectance spectra in the 0.3 to 1.1 micron range and orbital X-ray data have identified three major basalt groups in the region. Group I soil is derived from iron- and magnesium-rich titaniferous basalts and was apparently emplaced over the majority of the basin, however is presently exposed as a shelf in the southwest part. Group II soils, derived from very low titanium ferrobasalts, were emplaced in two stages subsequent to Group I emplacement and now appear as part of the outer shelf and topographic annulus. Subsidence of the basin interior preceded and continued after the emplacement of the third basalt group, a soil derived from a low titanium ferrobasalt. The Luna 24 site is found to be within a patch of Group II material.

Head, J. W., III↗
NASA NTRS1977

Vesta - The first pyroxene band from new spectroscopic measurements

Spectral reflectance measurements of asteroid 4 Vesta were obtained using a silicon vidicon spectrometer with a resolution of 2 to 4 thousandths of a micron. A flow chart illustrating the data reduction procedure is given, and the location, absorptivity, and bandwidth of an absorption band detected in the near infrared region are described. The absorption band has been interpreted as due to electronic absorptions in ferrous iron in sixfold coordination in the pyroxene, pigeonite. The heightened spectral resolution obtained from the silicon vidicon imaging system permits determination of the relative calcium content of the pyroxene (10 to 12%). Furthermore, the symmetry of the absorption band implies an absence of olivine, which is commonly associated with pyroxene in terrestrial and meteoritic mineral samples. Support for these conclusions is found in spectral analyses of pyroxene, as well as in spectral reflectance measurements of 4 Vesta obtained by other observers.

Mcfadden, L. A.↗
NASA NTRS1977

Characterization and Distribution of Lunar Mare Basalt Types Using Remote Sensing Techniques

The types of basal to be found on the moon were identified using reflectance spectra from a variety of lunar mare surfaces and craters as well as geochemical interpretations of laboratory measurements of reflectance from lunar, terrestrial, and meteoritic samples. Findings indicate that major basaltic units are not represented in lunar sample collections. The existence of late stage high titanium basalts is confirmed. All maria contain lateral variations of compositionally heterogenous basalts; some are vertically inhomogenous with distinctly different subsurface composition. Some basalt types are spectrally gradational, suggesting minor variations in composition. Mineral components of unsampled units can be defined if spectra are obtained with sufficient spectral coverage (.3 to 2.5 micron m) and spatial resolution (approximating .5 km).

Pieters, C.↗
NASA NTRS1977

Characterization of lunar mare basalt types. II - Spectral classification of fresh mare craters

Telescopic reflectance spectra (0.3-1.1 microns) of fresh craters are presented and classified according to the spectral features observed. These spectra are the closest lunar surface analog to laboratory spectra obtained for lunar rock powders. Mineral absorption features can be identified in these crater spectra and interpreted using returned lunar samples. Spectra of craters to 2.5 microns are required for specific mineralogical determinations from remote observation. If the currently available telescopic spectra are representative, classification of lunar telescopic spectra indicates that most (more than 80%) of the lunar surface is composed of a finite number of discrete and describable geochemical units.

Pieters, C.↗
NASA NTRS1976

Regional basalt types in the Luna 24 landing area as derived from remote observations

The Soviet spacecraft Luna 24 landed in Mare Crisium and returned samples that are expected to be much like the low titanium basalts from Luna 16 and Apollo 12. This conclusion is based on earth-based spectral reflectance measurements and multispectral imagery of the Mare Crisium region and uses a background of laboratory measurements of the spectral properties of Lunar soils. These data are used to describe the regional context and composition of the Crisium basaltic units. The returned sample may also contain minor components of a high-titanium basalt and a very low titanium basalt as well as highland material.

Pieters, C.↗
NASA NTRS1976

Multispectral mapping of the lunar surface using ground-based telescopes

Images of the lunar surface were obtained at several wavelengths using a silicon vidicon imaging system and ground-based telescopes. These images were recorded and processed in digital form so that quantitative information was preserved. The photometric precision of the images is shown to be better than 1%. Ratio images calculated by dividing images obtained at two wavelengths (0.40/0.56 and 0.95/0.56 microns) are presented for about 50% of the lunar frontside. Spatial resolution is about 2 km at the subearth point. A complex of distinct units is evident in the images. Earlier work with the reflectance spectrum of lunar materials indicates that, for the most part, these units are compositionally distinct.

Mccord, T. B.↗
NASA NTRS1976

Spectrophotometry /0.33 to 1.07 microns/ of 433 Eros and compositional implications

The spectral reflectance (0.33-1.07 micrometers) for the asteroid 433 Eros was determined as a function of rotational phase during January 28-30, and February 15, 1975. Interpretation of absorption features suggests Eros is composed of an undifferentiated assemblage of moderate to high temperature minerals (iron, pyroxene, and olivine, but no carbon). H-type ordinary chondrites are such assemblages, but it would be premature to conclude that Eros is like an H chondrite meteorite in composition until a better understanding is reached of possible physical differences between laboratory powders and asteroid regoliths for metal-bearing assemblages. There are no large-scale major compositional variations on the different sides of Eros.

Pieters, C.↗
NASA NTRS1976

Multispectral mapping of the lunar surface using groundbased telescopes

Images of the lunar surface were obtained at several wavelengths using a silicon vidicon imaging system and groundbased telescopes. These images were recorded and processed in digital form so that quantitative information is preserved. The photometric precision of the images is shown to be better than 1 percent. Ratio images calculated by dividing images obtained at two wavelengths (0.40/0.56 micrometer) and 0.95/0.56 micrometer are presented for about 50 percent of the lunar frontside. Spatial resolution is about 2 km at the sub-earth point. A complex of distinct units is evident in the images. Earlier work with the reflectance spectrum of lunar materials indicates that for the most part these units are compositionally distinct. Digital images of this precision are extremely useful to lunar geologists in disentangling the history of the lunar surface.

Mccord, T. B.↗
NASA NTRS1976

Characterization of lunar mare basalt types. I - A remote sensing study using reflection spectroscopy of surface soils

Telescopic reflection spectra of mature mare surfaces are used to identify and characterize major basalt types on the frontside of the moon. The spectra are classified according to (1) continuum slope and (2) near-infrared features. This study indicates that there are major lunar basalt types that are unlikely to have been sampled during the landing missions. Regions of basalt exist in the western maria with a TiO2 content comparable to that of Apollo 11 but with infrared characteristics that indicate a distinctly different composition. Samples from two landing sites, Apollo 12 and Luna 16, may contain fragments of a nearby basalt unit compositionally different from the dominant basalt type of the landing area.

Pieters, C.↗
NASA NTRS1975

Geochemical and geological units of Mare Humorum - Definition using remote sensing and lunar sample information

Mare Humorum has been found to contain at least nine distinct units. Mare basalt units typical of those at the Apollo 12 and 15 sites and central Mare Serenitatis exist also in Mare Humorum, but the early, high-titanium basalts typical of Mare Tranquillitatis and southeast Mare Serenitatis are absent. Basalts containing about 5% TiO2, not sampled at any Apollo site, also are found in Mare Humorum. Emplacement of extensive low-titanium basalts occurred in Mare Humorum in roughly the same period as emplacement of similar basalts at Apollo 12 and central Mare Serenitatis. These were followed by emplacement of the higher titanium basalts during a later period. These and other units are characterized and their extent mapped using a combination of remote sensing and Apollo sample studies. The results are interpreted in the context of the evolution of the Humorum region.

Pieters, C.↗
NASA NTRS1974

Lunar surface - Identification of the dark mantling material in the Apollo 17 soil samples

Evidence indicates that Apollo 17 sample 74001, a soil consisting of very dark spheres, is composed almost entirely of the dark mantling material that covers a large region of the southeastern boundary of Mare Serenitatis. Other Apollo 17 samples contain only a component of this material. The underlying basalt in the Taurus-Littrow valley appears to be an extension of material forming the low-albedo ring around part of Mare Serenitatis and much of the surface of Mare Tranquillitatis. The surface of this basalt region is spectrally distinct from areas with dark mantling material. These results are derived from telescopic and laboratory measurements of the optical properties of lunar soil. Digital vidicon color images are used to map the extent of these material units in the Taurus-Littrow region.

Pieters, C.↗
NASA NTRS1974

Orange glass - Evidence for regional deposits of pyroclastic origin on the moon

Crystallized spheres of orange glass from Shorty Crater at the Apollo 17 site are shown by spectral reflectance data to be the characteristic ingredient of the dark mantling deposit of the Taurus-Littrow region. This deposit, mapped on spectral vidicon images taken using earth-based telescopes, apparently is thickest 50 km northwest of the Apollo 17 landing area, and has a gradational contact with the surrounding materials. The irregular areal distribution of the dark-mantle deposit and the gradational borders support conclusions based on laboratory studies of the orange soils that these are volcanic pyroclastic materials. Similar deposits are identified by spectral reflectance properties near Rima Bode, Schroeter W, Fauth H, and Higinus W. The same material is likely to occur at Sulpucius Gallus based on visual and photographic observations of orange soil. The apparently restricted occurrence of the orange-glass deposits in a belt along the edges of major mare basins implies structural control of volcanic vents and a possible deep-seated origin.

Adams, J. B.↗